Hobbywing 3A Power Regulator 5/6V UBEC (2-6S Input)

Contact UsCustomer Reviews

Hobbywing 3A Power Regulator 5/6V UBEC (2-6S Input)

Our Price:

$7.99


Quantity

OUT OF STOCK


Availability No items available
Weight 0.10 lbs
SKU QX-10788-HW-3A-UBEC

Hobbywing 3A Power Regulator 5/6V UBEC (2-6S Input)

The 3A-UBEC is a switch-mode DC-DC regulator supplied by a 2-6S (6.6v-28v) lithium battery pack (or 5-18 cells NiMH /NiCd battery). The output is either 5v or 6v slectable via jumper to provide consistent safe voltage to your receiver, gyro and servos. Compared with the linear mode UBEC, the overall efficiency of the switch-mode UBEC is much higher and provides longer battery life. This UBEC is equipped with intrgrated noise reduction circuits and a shielded housing to reduce any electromagnetic interference. Suitable for RC aircraft or helicopter.

Specifications:

  • Output Voltage: 5V@3A or 6V@3A (Changeable with an output-voltage jumper switch )
  • Continuous output current: 3 Amps, 5A burst
  • Input: 5.5V-26V (2-6 cells lithium battery pack or 5-18 cells NiMH /NiCd battery)
  • Size: 43mm*17mm*7mm (L*W*H)
  • Weight: 11g

Features:

  • Designed with an advanced switch mode DC-DC regulator IC.
  • Powerful output even working with 4 to 6 cells Lipo battery.
  • Battery polarity reversal protection.
  • A metal shield covers almost all the electronic components, and a specially made filter is attached to the output wires to significantly reduce the electromagnetic interference.
  • The working status is shown by an indicator (LED), lights when the output is in normal range.

 


: *
: *
: *
 

Redwing RC Aluminum Servo Circle Arms

Description: DID YOU GET COOL ALUMINUM OR CARBON FIBER ARMS WITH YOUR KIT, BUT DON'T WANT TO USE THE PLASTIC CIRCLE ARMS THAT COME WITH YOUR SERVOS? FINALLY! THE SOLUTION IS HERE!!

Now made to fit Hitec, OR XQpower/Futaba/PowerHD

Made to line up with Redwing, Goldwing, and MOST other ARFS that include servo arms. The holes pre drilled are threaded for a 2mm bolt, so that you do NOT have to use a nut on the bottom. Just a little loc tite on the servo arm threads, and tighten. YOUR DONE!

Not sure if it's the best thing since sliced bread, but it's close!

1 circle $4.99
5 = $19.95
10= $38.90
 

RW-Circle-Arm

$4.99

Miracle RC Aluminum Spinners (Spinner)

Description:

All NEW design! These Miracle aluminum spinners have back plates which have extensive lightening, the spinners are cut for a large 3d style prop, and the back plates are drilled for multiple engine sizes!

FOR ENGINE SIZE:

  • 2.5" Spinner : DLE 20, Enya FS120, All YS Four Strokes and any that match these
  • 2.5" Spinner : DLE 20, Enya FS120, All YS Four Strokes and any that match these
  • 3" Spinner: DLE 30, DLE 35RA, DLE 55, DLE 55RA, MLD 28, DA 50, 56, 58, and EVO 54 (and any other engines that fit these templates
  • 3.5" DLE 30, DLE 35RA, DLE 55, DLE 55RA, MLD 28, DA 50, 56, 58, and EVO 54 (and any other engines that fit these templates

    SPECS:
  • 2.5": Height 2.7", weight 2.7oz, includes 30mm bolt.
  • 3": Height - 3.1", weight 3.2 oz, includes 55mm bolt.
  • 3.5" : Height 3.7", weight 3.6oz, includes 60mm bolt.

 

 

Miracle RC Aluminum Spinners are high quality CNC Machined spinners. Very light, with a lightened back plate included. Very accurate, very beautiful, and a great value!

 

  • 2.5" - $16.95
  • 3" - $20.95
  • 3.5" - $27.95
  • 3.75"- $31.95
  • 4.0" - $38.95
  • 4.5" - $44.95
  • 5" - $50.95

MRC-Spinner

$21.95

Xerun 4268SD-2400KV G3 OnRoad Motor

Xerun 4268SD-2400KV G3 OnRoad Motor

HWI30401910

$149.99