Bob Smith Industries Quik-Cure Epoxy (5 Min)
Bob Smith Industries Quik-Cure Epoxy (5 Min)QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE™ can be handled after 15 minutes. Full strength is reached in 1 hour. Works Best On:
Works Good On:
Avaliable in 4.5oz Size. QUIK-CURE™ 5 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals. QUIK-CURE™ is the least temperature sensitive of our epoxies. It will cure in temperatures down to 40˚F. Temperatures above 90˚F shorten the working time before the epoxy begins to set up from 5 to less than 4 minutes. QUIK-CURE™ bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. QUIK-CURE’S™ lack of brittleness allows it to form lasting bonds on materials as different as balsa wood and glass; however, it is not recommended for areas subject to long-term immersion in water. Cured QUIK-CURE™ can be coated with polyester resin without affecting the curing of the resin. Full cure in less than 15 minutes. |
TAFT-HOBBY QUANTUM 90MM EDF JET 6S PNP VERSION
TAFT-HOBBY QUANTUM 90MM EDF JET 6S PNP VERSION |
TH-QT-6SPNP
$339.99
CellMeter 8 Battery Voltage Checker & Balancer, Servo Tester Improved w/LCD Backlight
| CellMeter 8 Battery Voltage Checker & Balancer, Servo Tester Improved w/LCD Backlight
Description: GT Power Servo Consistency Master. With this cool device you can test up to 3 servos at a time for consistency and precision. With the GT Power servo tester you can see how servos react in three different testing modes. Manual, Neutral, and Automatic. --- Manual Mode:: Turn the knob at different speeds however you want to check reaction time. Neutral Mode:: Make the servo go back to the neutral position. Automatic Mode:: "window wiper mode"- make the servo swing back and fourth at max angle. --- Specs:
|
QX-10256-Cellmeter8
$14.99
Nitro Star G3.0 Engine, w/Pullstart, 6.5mm Rotary Carb, SG Shaft, Side Exhaust
| Nitro Star G3.0 Engine, w/Pullstart, 6.5mm Rotary Carb, SG Shaft, Side Exhaust
Description:
|
HPI15105
$114.99
