RedwingRC Electric Power Accessories. Motors, Batteries, Electric Props, BEC, and Servos.

Tariff Information update

The Redwing RC Office will be operating with reduced staff until 24 Jun. Orders can still be accepted during this time but will take longer than usual to process/ship. If you need the item urgently (moved to top of the list), select Priority express and we will do our best to rush the order out to you as quickly as possible.

more offers

Hobbywing Multifunction LCD Professional Program Box

Ask a question about this product

Printable version

Options

Our Price:

$34.00

Quantity

OUT OF STOCK

Notify me when back in stock

Details


Availability	No items available
Weight	1.50 lbs
SKU	HWI30502000

This is the Hobbywing Multifunction LCD Program Box. Program your ESC or check the voltage of your LiPo battery, the Hobbywing Multifunction LCD Program Box does it all.

Features:

Program the parameters of your ESC
Each parameter is displayed on the easy-to-read LCD screen
Works as a USB adapter to link the ESC with a PC to update the firmware
Measure the voltage of a LiPo battery, either the whole battery pack or each cell

Specifications:
Size: 90x51x17mm
Weight: 65g
Input Voltage: 4.5-12.6V (If the ESC doesn't have a built-in BEC, you must use an additional battery pack to supply the program box)
Display: 16x2 characters LCD
Interface: Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug)
Firmware: compatible with all speed controllers, including Xerun series V2.0/2.1/3.0/3.1, EZrun V2.0, Platinum series and Platinum V3 series

HiTec 5645mg

Description:
The HS-5645MG is one of the best choices you can make for a 50cc sized plane for the cost. They will also work well in 30cc planes. It is fully programmable using Hi Tec's programmer. The combination of torque, speed, price and extreme holding power make it a favorite among pilots. Special alloy gears called “Alumite” offer tremendous strength yet are lightweight as well.

Specifications:

Torque:
- 143 oz/in at 4.8V (10.3 kg/cm)
- 168 oz/in at 6V (12.1 kg/cm)
Speed:
- .23 sec at 4.8V
- .18 sec at 6V
Voltage: 4.8V - 6V
Weight: 2.11oz (59.82g)
Size: 40.6 x 19.8 x 37.8mm (1.59 x 0.77 x 1.48in)
Motor Type: 3 Pole Ferrite
Bearing Type: Dual Ball Bearing
Gear Type: 3 Metal Gears and 1 Resin Metal Gear
Connector Wire Length: 11.81" (300mm)
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Temperature Range: -20 to +60 Degree C
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Dead Band Width: 8usec
Potentiometer Drive: Indirect Drive
Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
Current Drain (6.0V): 9.1mA/idle and 500mA no load operating

HS-5645mg

$45.99 45.99

CDI Remote Kill Switch

Description:
The Optical Kill Switch for gas rc planes, allows you to safely and remotely kill your electronic ignition. It is Fiber Optically Coupled to isolate your ignition system from your radio system so there is NO interference

Features:

Includes a remote mountable bright LED to indicate when the ignition is armed.
Fiber Optic coupled input/output.
Li-Po/Li-lon/A123/Ni-Mh/NiCad Input.
Up to 20 Volt 16 amp MOS-FET(IRF7456) output.
Low to 3Volt 3amp output.
Low Voltage Drop-Less than 150mv.
100% Surface Mount Technology.
Heavy Gauge Wires,universal connectors.
Small and light weight –only 0.3 OZ!(8g)
Reverse Bettery input protection.
Shut down the transmitter power or receiver to cut off automatically when kill engine