Scorpion SII-4035-330KV - .160 size Glow Equivalent (8-11s) - (11-21lbs, 3420w)
Specifications |
| Stator Diameter | 40.0 mm (1.575 in) |
| Stator Thickness | 35.0 mm (1.024 in) |
| No. of Stator Arms | 12 |
| Magnet Poles | 10 |
| Motor Wind | 14 Turn Delta |
| Motor Wire | 20-Strand 0.25mm |
| Motor Kv | 330 RPM / Volt |
| No-Load Current (Io) @ 10 v | 1.41 Amps |
| Motor Resistance (Rm) | 0.031 Ohms |
| Max Continuous Current | 65 Amps |
| Max Continuous Power | 2400 Watts |
| Weight | 435 Grams (15.34 oz) |
| Outside Diameter | 48.8 mm (1.921 in) |
| Shaft Diameter | 7.98 mm (0.30 in) |
| Body Length | 64.9 mm (2.26 in) |
| Overall Shaft Length | 95 mm (3.346 in) |
| Max Lipo Cell | 11s |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
Weight including packaging
852g
Data Chart
View Scorpion SII-4035-330KV Data Chart
Full Dimension
Zap Z-7 CA Debonder 1oz
|
Description:Bob Smith Industries CA Glue Super-Gold+™ Odorless, CASUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Works Best On:
Works Good On:
Avaliable in 2oz and 3/4 Pocket Size. Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.
|
PAAPT-16
$4.99
BMS-20630 Aluminum Servo Arm, Dual Sided, 8 hole, 4.00", 25T Futaba Spline
BMS-20630 Aluminum Servo Arm, Dual Sided, 8 hole, 4.00", 25T Futaba Spline |
BBR-BMS-20630
$9.99
Enduro Knightrunner 1/10 Off-Road Electric 4WD RTR Trail Truck, Blue
| Enduro Knightrunner 1/10 Off-Road Electric 4WD RTR Trail Truck, Blue |
ASC40115
$439.99

