Vintage Stick Micro RTF Airplane
The Rage R/C Micro Vintage Stick takes a step backward in time to a nostalgic look that evokes memories of yesteryear, but with modern carbon fiber materials and updated radio technologies, like 2.4GHz. This classic-appearing aircraft is not only a great way to build R/C piloting skills, but also an enjoyable model for experienced R/C enthusiasts to fly in compact areas. The Micro Vintage Stick is produced with simple and durable construction techniques, such as the carbon fiber "stick" airframe and foam flying surfaces. The featherweight (24g without battery) construction and high-capacity flight battery combine to deliver adequate power for aerobatics like loops, spins, and barrel rolls, or extended flight times when enjoying more relaxed flight maneuvers.
Specifications:
$20 Flat rate shipping lower 48 only. Contact us at [email protected] to calculate international shipping cost. |
2.5 Gallon Red Fuel Tank and Electric Pump with ESC Option (Gas, Smoke, Kero or Diesel)
| 2.5 Gallon Red Fuel Tank and Electric Pump with ESC Option Includes: 18” Fill Line Extension with 30" Return Line and Funnel NOW cap comes with the No-Spill Cap and Nozzle and can has clear window to see fuel level!! All Electric Pumps are 12vdc pumps but if run @ 12v's these pumps may pump at too high a pressure. Pumps w/o ESC (Electronic Speed Control) to adjust speed of pump use a 7.2v<9.6v NiMh ~ A123 or LiFe 9.0v or LiPo 7.4v battery. Units w/ESC may use up to a 12vdc pack Battery. Units w/o ESC: may also try different battery voltages to change pump speed! Options:
Note: Electric pumps have XT60 plug that will also accept EC3 female plug |
JMR 2.5NS
$219.95
NEW
EX-PRO RRS
Special Order Item allow 3-4 Weeks for deliveryEX-PRO RRS16 channel high power expander with Auto Protocol technology. Small Yet Powerful and with Auto Sense... Welcome to the new generation of Power Expanders! EX-Pro RRS is a high powered servo distribution system designed for all large scale models. It boasts Auto protocol discovery with dual (or single) receiver inputs (tripple for SRXL2) for receiver redundancy, 16 output channels matched one to one with your transmitter. EX-Pro boasts a high powered design capable of powering any model with todays high powered digital servos. Coupled with the AR ProLine servo cables and you have the absolute best possible combination of power delivery for your high energy flying machine.
Auto Protocol sensing and Supports multiple Protocols Whether you fly Futaba, Jeti, Spektrum, JR, Core, Graupner or FRSky the AR EX-Pro RRS has you covered. With built-in downlink telemetry for each radio system and the ability to change the protocol using our exclusive auto protocol discovery feature, the EX-Pro RRS can be easy changed from model to model with different receivers in each.
Sixteen programmable outputs Looking at that next big project and wondering how you’re going to power all those servos, the EX-Pro RRS is equipped with 16 input channels and 16 outputs, all via a single cable connected to your receiver. Each channel is matched one to one with your transmitter so you can program simply and easily in your transmitter. Building that next giant scale 3D or IMAC model the EX-Pro has it covered.
Easy to Use EX-Pro RRS comes with preset channel mapping that matches your chosen radio brand so model setup is really simple.
Telemetry ready EX-Pro RRS gives you live feedback of both your batteries on your radio. Monitor the voltage, capacity and current drawn from the model's batteries at any time during the flight. Log maximum current draw during extreme manoeuvres (TX must be able to display maximum current draw) to ensure your model's servos are getting the full power. Helps to ensure your batteries are ready for the next flight.*
RRS - Redundant Receiver technology EX-Pro RRS is the safest in signal sharing technology, the redundant receiver system ensures your model by utilising two receivers. Unlike other power systems Smooth Flite reads signal from both receivers at all times and runs an intelligent algorithm to select the best signal.
In the unlikely event that a receiver fails then EX-Pro RRS switches to the better receiver in less than 0.5 of a signal frame to ensure you will have constant control of your model. Reliability is key with models today, with our redundant receiver system you can ensure your model is always reporting back to you.
(Optional) Vibrant colour touch screen display. Of course we offer an optional touch colur screen for EX-Pro so you can visually check parameters if you like. The vibrant Smart Display gives you feedback and simple programming all in one touch screen display. With intuitive buttons and a single setup design. Your model will be in the air before you know it.
Dual battery redundancy, power management you can trust.
View the EX-Pro RRS Users Guide PDF file
SPECIFICATIONS: * Redundant Receiver system – works with dual or single receiver system * Auto Discovery Mutli-protocol support SBus2, Spektrum SRXL and high speed SRXL2, JR/DFA XBus, Graupner HoTT, Jeti EXBus, SRXL2, FRSky adn Sport, All SBus compatible transmitters including CORE. * Telemetry ready * 16 Input channels mapped directly to 16 output channels. * Works with single or dual battery configuration. * Works with all battery chemistries. LiFe. LiPo, Lion. (High power batteries required) * Full Dual Battery Redundancy - If one battery fails the other battery takes full control. * (Optional) Vibrant Colour 2.4inch diagonal touch screen with 64k colour * EX-Pro RRS dimensions 2.59 x 1.92 x 0.47 inches (66mm x 49mm x 18.5)mm * EX-Pro RRS weight (47gms). |
BRC-922
$199.95
Curtiss P-40 Warhawk Micro RTF Airplane w/PASS System
| Curtiss P-40 Warhawk Micro RTF Airplane w/PASS System |
RGRA1305
$109.99
