RedwingRC Accessories

Lemon RX DSMX Compatible 7-Channel with Stabilizer Gyro (Top Pin) w/ compatible Satellite (DSM2 backward compatible)

Ask a question about this product

Printable version

Options

Our Price:

$32.99

Quantity

OUT OF STOCK

Notify me when back in stock

Details


Availability	No items available
Weight	0.25 lbs
SKU	LM-0004

Description:

Lemon Rx DSMX Compatible 7-Channel Stabilizer (Top Pin) + Lemon DSMX Compatible Satellite (DSM2 backward compatible)

Type:	Stabilizer with DSMX Compatible 7-Channel Full Range Receiver
Number of Channels:	7
Modulation:	DSMX Compatible (Also DSM2 backward Compatible)
Band:	2.4 GHz
Dimension:	25(L) x 35(W) x 7(H) mm
Weight:	8.3 gram without satellite
Voltage Range:	3.45 - 7.2V

Highlight

7-Channel receiver when stabilizer is disabled. (AUX2 located at bind position)
Supports Flaperon by switching J6 to on position while setting the Spektrum transmitter wing type as Flaperon
Gear channel for remote stabilizer on/off
Remote master gain on-the-fly adjustment on AUX3.

Using the stabilizer as 7-Channel Receiver

Turn off J1 to J6.
Follows normal binding procedure by inserting bind plug to the bind location and enable binding on transmitter.
Bind location will become the 7th channel. Use ESC with BEC on throttle channel for supplying power to servo.

Understanding the Lemon Rx stabilizer

Diagram of unit

Install location of Lemon Rx stabilizer

Direction of servo movment with changes in direction when stabilizer is enabled

Setup Instruction

Glue your stabilizer alone the C.G. Flipping your gyro for the required installation is also OK.

(No Flaperon for Fixed Wing/ Delta / V-Tail) Disable any mixing on you Spektrum transmitter and choose the correct wing type by setting J4 and J5.
1. (Flaperon for Fixed Wing) Disable any mixing and enable Flaperon on Spektrum transmitter. J4, J5 and J6 at on position.
The stabilizer already has a build-in Spektrum compatible receiver and will work without satellite. Insert bind plug to bind location and power on the unit. LED indicator will flash quickly. Turn on your transmitter to bind mode for binding. If binding is successful the LED indication will stop flashing and become solid.

Sub-trim and set stick directions with Spektrum transmitter on all channels as necessary. Upon trimming, toggle Gear switch twice in 1 second allows stick centering detection which is required for optimizing the stabilization. Gear switch is used to switch between manual or stabilization control Green + red LED indication means no stabilization while solid green means stabilization is enabled. If Aux3 is available on your transmitter, remote master gain tuning for all 3 channels will become available. However, during setup AUX3 should be in its center position.

Adjust the 3 potentiometers to 50% and check the gain direction. Ensure your Gear is set to enable gyro with gain = 1 on AUX3 (if available). Rotate the plane in all 3 axis and adjust J1 to J3 as necessary for gain direction changing. Ensure the servo moves the wing as shown in the earlier diagram for proper correction. Adjust the individual gain as necessary.

Ready to start flying! Remember to check Gear, AUX3 and proper gyro correction for all 3 axis just before you flying your plane!

Fokker DR I 770mm Wingspan Wood Model ARF kit (Pre-Built ARF/PNP Electric Power version)

Fokker DR I 770mm Wingspan Wood Model Kit (PNP Electric Power Finished version)

DW-S1714

$259.99 259.99

FUTABA T12KH 2.4GHz T-FHSS Heli Spec Radio System w/ R3001SB Receiver

Product Description

With 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.

Features

Built in AFHSS 2.4GHZ / SLTTM Module (Single / Bi-Directional Selectable)
4096 Resolution
Improved Latency (Dual Processor 7ms Frame Rate)
Vibration Mode
Included Touch Screen Stylus
Easy-to-Read, Easily Accessible 5.1-inch Wide Backlit LCD Touch Screen (320 x 80 Pixels)
Customizable Menu
One-Stop Model Type Setting
3 Multi-Tasking Digital Trims
Fully Assignable Control Switches, Knobs, Sticks and Digital Trims
Ultra-Smooth Quad Ball Bearing Gimbals
Full-Size Comfortable Hand Grips (Top Quality Elastomer)
Selectable 4 Different Control Stick Modes, Plus 2 Additional Manual Modes (Software)
Easy Gimbal Mode Change and Tension Adjustment (Hardware)
Power Management System (Adjustable Backlight & Auto Shut-off Time)
Digital Trim Nano-Adjuster (200 Adjustable Trim Steps)

Standard Programming

9 Assignable Control Channels
3-Model Type Programming (ACRO/GLID/HELI)
30-Model Memory
20 Character Model Naming
8 Flight Conditions with 10 Characters
Fail-Safe
Channel Function
EPA
Dual Rate & EXP*
Sub-Trim
Servo Reverse
Servo Speed (up to 25 sec. in each direction)*
Servo Monitor (Monitor & Servo Test)
8 Programmable Mixes (5x 2-Point, 3x 7-Point Curves)**
Trainer
Throttle Lock

* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions
** Capable of a Maximum of 8 Rates by 8 Flight Conditions

HRP-FUT01004345-3

$429.99 429.99

DLE-130cc Twin Gas Engine with Electric Ignition and Mufflers

DLE 130 Engine

+ Free Shipping (Continental US only!) If international customer, please contact us for shipping quote. You will be charged separately for shipping.
+ Free 2 Year warranty

Description:
High performance in a compact package!

The DLE-35RA features a rear exhaust for the perfect tuned pipe setup. It also includes a newly designed piston with re-engineered skirt for less piston weight - resulting in such advantages as awesome throttle response, more power and longer engine life. Producing 400 more rpm than the DLE30, the DLE-35RA comes with engine standoffs, electronic ignition, spark plug and muffler.

Download DLE 35RA Mounting Template
Download DLE 35RA Manual Coming Soon

Specifications:

Displacement: 34.9 cc (2.13 cu in)
Bore: 1.5 in (38.5 mm)
Stroke: 1.17 in (35RA mm)
Weight: 2.6 lb (42oz)
RPM Range: 1,600-8,500
Output: 4.1 hp @ 8,500 rpm
Requires: unleaded gasoline, oil, ignition battery & propeller
Includes: muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension
Suggested Propellers: 18x6, 18x8, 19x6, 19x8, 20x8, 20x6
Suggested Break-in Prop: 18x6
Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
Compression Ratio: 7.6:1
Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
Weight Breakdown: Engine: 32.1 oz (910 g); Muffler: 2.6 oz (60 g); Ignition: 5.2 oz (120g)
Recommended Propeller: Redwing RC 3d Props - type 19x6 19x8 20x6 20x8 Propeller