Hitec D930SW High-Speed Steel Gear Servo (13kg/182oz [email protected])
The power of Hitec’s D-Series servos continues with the introduction of the next Premium Class trio: the D930SW, D954SW and D955TW. As with our entire “D” line, these technologically-advanced servos are powered by our 32-bit MCU (Microcontroller Unit) and 12-bit ADC (Analog to Digital Converter) industrial science and possess Smart Sense engineering with rapid, high resolution response. Their unprecedented programmability and wide-voltage capabilities deliver the most progressive, leading-edge performance for all your radio control needs. Built with incredibly durable steel gears, the D930SW is the perfect upgrade from our popular HS-8330SH servo. Advancing servo technology and providing superior engineering has always been Hitec’s mission and that continues today as we expand our outstanding D-Series product line. FEATURES
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Performance Specifications | |
| Operating Voltage Range (Volts DC) | 4.8V ~ 7.4V |
| Speed (Second @ 60°) | 0.11 ~ 0.07 |
| Maximum Torque Range oz. / in. | 112 ~ 182 |
| Maximum Torque Range kg. / cm. | 8.0 ~ 13.0 |
| Current Draw at Idle | 30 mA |
| No Load Operating Current Draw | 500 mA |
| Stall Current Draw | 5,200 mA |
| Dead Band Width | 1 µs |
| Physical Specifications | |
| Dimensions (Inches) | 1.57 x 0.78 x 1.46 |
| Dimensions (Metric) | 40.0 x 20.0 x 37.0 |
| Weight (Ounces) | 2.33 |
| Weight (Gram) | 66.0 |
| Circuit Type | 32bit Programable Digital |
| Motor Type | Coreless Metal Brush |
| Gear Material | MK 1st Gear & 3 Steel Alloy Gears |
| Bearing Type | Dual Ball Bearing |
| Output Shaft (type / Ømm) | H25T |
| Case Material | Plastic / Aluminum |
| Dust / Water Resistance | Splash Proof |
| Connector Gauge (AWG) / Strand Count | 20 / 80 |
| Radio Control Applications | |
| Parkflyer | N / A |
| Sport Plane | N / A |
| Sailplane | N / A |
| 3D Performance | N / A |
| Scale | N / A |
| Electric Helicopter | 500mm |
| Gas Helicopter | 50 - 59 Class |
| On Road | 1/10th |
| Monster Truck | 1/10th |
| Buggies | N / A |
| Truggies | N / A |
| Short Course / Truck | N / A |
| Crawlers | N / A |
| Sail Boat | N / A |
| Power Boat | N / A |
ACCESSORIES
- 3 Steel Alloy Gears Set | Link |
- Metal / Karbonite 1st Gear Set | Link |
- Plastic / Aluminum Case Set | Link |
- Applicable Horns & Screws
-
PROGRAMMABLE FUNCTIONS
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Soft Start Rate
- Overload Protection
- Data Save / Load
- Program Reset
- Coreless Metal Brush Motors
- Nylon Reinforced Plastic Upper and Lower Case
- Diamond Cut Aluminum Heat Sink Center Case
- Dust Resistant and Splash Proof Case
Muffler Extensions, Exhaust Tubes (Fits DLE and other engines)
|
DLE Muffler Extensions Choose from 5 sizes! FORMAT: LxW (width is inside diameter) A: 63x15 mm : DLE 20RA B: 64x17 mm : DLE 35RA/40 C: 78x20 mm : DLE 55RA D: 96x25 mm : DLE 55, DLE 111, DLE 120 E: 121x31 mm : DLE 61, DLE 85 *Sold individually- if you have a twin engine, you will need two extensions *Each Hose extension comes with a metal clamp to tightly secure it to the muffler.
|
DLParts-
$6.99
100-140cc Twin Canister Muffler (DLE111/120/130, EME120, DLA112/116)
| 100-130cc Twin Canister Muffler (DLE111/120/130, EME120, DLA112/116)
|
D-CN-100-130
$189.99
Viton Tubing Fuel Tube 1 Meter 1/8" ID x 1/4" OD x 1/16" Wall For Gas Engine
| Viton Fuel Tube/Tubing 1 Meter 1/8" ID x 1/4" OD x 1/16" Wall For Gas Engine |
Viton-Fuel Tube
$19.99
