Booma RC Wallaby Switch II with Active Dual Battery Redundancy and Voltage Monitoring

Contact UsCustomer Reviews

Booma RC Wallaby Switch II with Active Dual Battery Redundancy and Voltage Monitoring

Our Price:

$59.00


Quantity (4)

Availability 4 in stock
Weight 0.28 lbs
SKU BRC-163-JR
Manufacturer Booma RC

Quick overview: Compact high power Digital Switch with active battery sharing and built in voltage Battery low voltage warning

Welcome version 2 of the all popular Wallaby Switch. We have added active battery redundancy and balancing as well as active low voltage warning to the worlds most compact high power intelligent switch for Radio Controlled and Robotics applications.

Wally offers digital microprocessor control to monitor the voltage of your models receiver batteries. Wally also employs the latest in micro power technology so you can keep Wally connected to your receiver batteries 24/7. The built in dual battery redundancy circuit ensures that if one battery fails it is completely isolated from the circuit. We have also added active battery balancing so both batteries are utilized to their maximum potential.

Add a Booma RC Wallaby Switch to your next project for peace of mind knowing your batteries are being watched 24/7

We offer several different connector options for Wallaby II. Please look below for standard connector options. If you have a special connector requirement that is not shown just send us an email [email protected] with your required specification.

 
Click Here to Download Wallaby Switch Instructions 

 

SPECIFICATIONS:

- Microprocessor control - of 2 x high powered digital switching circuits.

- Fail Safe Switching - of both batteries.

- High Bright LED - for easy daylight reading.

- Voltage Monitoring - of each battery.

- Selectable Battery Type - for monitoring of LifeP04, LiPo or Lion battery chemistries.

- Low Voltage Alarm via LED indication.

- 2 x 15 Amp constant current capability. (2 x 20 Amp for 30 seconds)

- Micro-Power Design less than 0.1mA in standby mode.

- Input Voltage 6v to 13v.

- Weight 17 grams.

- Dimensions 36mm x 17mm (1.41 x 0.66 inches).

FAQs: 

I am using one receiver and do I need to use a y connector to attach the batteries? I see there are 2 output leads. If only one lead is connected to the receiver l assume the switch will use the battery with the highest voltage. If one battery goes bad will the switch immediately switch over the the good battery.

YES--Connect one battery to each input of the Wallaby switch. The outputs of the Wallaby switch are internally connected so you can connect either or both outputs to the receiver.

This Switch is configured with JR inputs and JR outputs.  Special order configurations (Ultra inputs and JR outputs or Ultra inputs and Ultra outputs) can be ordered for an additional cost (1-2 weeks).

: *
: *
: *
 

LiFe Batteries 2S

Description:
Our LiFe Batteries (also known as A123 Batteries) have huge advantages over most other options.

1) LiFe Batteries are lightweight - as light as Lipos
2) LiFes are safer than Lipos (do not combust easily like lipos)
3) LiFe Batteries supply a constant voltage (They stay right near 6volts from start to finish ensuring consistent flights)
4) Run Life batteries to your servos and ignition without regulators (For extra caution some people run a regulator to their ignition still)
5)Life's have a high Charging Capacity. Charge up to 5amps, allowing you to charge them up in MINUTES!

The 2100 or 3000 Mah can be used as a SINGLE battery system for 30cc planes. (we recommend spliting the lead and put 2 JR leads on, to run to the receiver and the other to ignition). You can also run a single 3000 Life Battery on a 50cc Plane.

The 1450mah LiFE Battery is a great option for those that want a separate battery for ignition and receiver (if you are running FM or hesitant to use a single battery system). The 1450mah Life is a great battery for the ignition for either a 30cc or 50cc sized plane

We recommend the following:
On the MXSR (2) 2100mah, or 1 3000mah placed on the mount box or front of the plane. It is a bigger plane and will do well with the extra voltage and weight.
Other 30cc planes - (1) 1450mah for ignition, (1) 2100mah for receiver or for a lighter set up
(1) 2100mah for both (split the wire to 2 leads) OR (2) 1450mah (one for ignition one for receiver).

50cc sized planes (1) 1450mah LiFe battery for ignition and (1) 3000mah LiFe battery for receiver or, for a lighter set up
(1) 1450mah for ignition, and (1) 2100 for receiver OR (1) 3000mah LiFe for both receiver and ignition



WATCH THIS VIDEO: Explains whether to use a regulator or not, 2 batteries or 1 for your plane, Redundancy and more.


Specifications:

  • Type: LiFe Battery (same technology as A123)
  • Weight:
    • 1450mah - 2.8oz,
    • 2100mah - 4oz,
    • 3100mah Life - 5.5oz
  • Size:
    • 1450mah- 15mm x 34mm x 87mm,
    • 2100mah- 12mm x 50mm x 106mm,
    • 3000mah- 130mm x 45mm x 15m
  • Voltage: 6.6Volts
  • Discharge rate:
    • 20c maximum continuous
    • 40c maximum burst
  • 2 cells (2s)
  • 14gauge Wire
  • Connectors: Two Options!
    • T Connector (T connector that fit a standard Dean)
    • XT-60 Connector. Choose Below
  • Also a balancing lead

Be sure to select the XT connector if purchasing for use with our Power Box PRO's. Please select connector type: Deans or XT.
 

 

 

  • 1450mah - $15.99
  • 2100mah - $25.99
  • 3000mah - $39.99
     

LiFe

$25.99

High Quality Wood Props for Gas or Nitro Aircraft

High Quality Wood Props for Gas or Nitro Aircraft
We are proud to be an official retailer for Falcon© Brand Carbon Fiber Props. These high quality props are the real deal- a lightweight and durable wood prop wrapped in carbon fiber weave for extra strength.




Features:

  • Scimitar design for efficiency
  • Sharp tips - thin blades for better performance
  • Made of high quality 3K carbon fiber weave
  • Lightweight for quick spool up
  • Created from high quality European steel molds
  • Pre balanced at the factory (final fine tuning recommended)
  • Beautiful looks, strength and performance


*Falcon Hats are currently out of stock

Falcon Prop Test Chart

DW-GP-Prop

$12.99

AR V2 IBEC PRO IGNITION KILL SWITCH (HV switchable 6.4/7.4V)

AR IBEC PRO IGNITION KILL SWITCH

Booma RC

Booma RC pin flag switch for IntelliReg, Smart-Fly or Gryphon regulator. This pin flag switch Booma RC is an ultra high quality fail safe switch designed as a replacement switch for Smart-Fly systems, Power System, Power Expander, Regulators as well as Gryphon Heli regulators.

Supplied with 1 x switch actuator and 1 x pin flags.



BRC-1427-IBEC-Kill-Switch

$59.99