FUTABA T6J 2.4GHz S-FHSS Radio System w/ R2006GS Receiver

BE-62 Engine

Check out the BE-62 single cylinder gas engine from Bull Engine!

The BE-62 uses ceramic cylinder technology for long engine life. Other features include a genuine Walbro carburetor, factory installed steel insert for spark plug in the head, a common 30mm diameter 4 bolt prop circle, auto advance electronic ignition, and a billet aluminum CNC machined crankcase. The BE-62 is complete with muffler, ignition, NGK plug, and a three year USA warranty.

Enjoy your Bull Engine Today!

Specs:

• Displacement: 62.1cc (3.78 ci)
• Output power: 6.0hp
• Weight: Engine: 1470g (51.8 oz)
• Exhaust Muffler: 100g (3.5 oz)
• Ignition: 125g (4.4 oz)
• Total: 1695g (57.3 oz or 3 lb, 9 oz)
• Bore: 46.5mm (1.83in)
• Stroke: 36.6mm (1.44in)
• Rpm Range: 1300-8000
• Recommended Prop Size: 23x8 - 24x12 (Break-in with 23X8)
• Carburetor: Genuine Walbro
• Fuel: Gasoline pre-mix with 2 stroke oil 
• Oil Ratio and Type:
  • For Break-in, 30:1 conventional 2 stroke oil for air cooled engines
  • After Break-in, 40:1 full synthetic 2 stroke oil for air cooled engines
• Ignition: Electronic Auto Advance
• Ignition Battery: 4.8 – 8.4 Vdc
• Spark plug: NGK CM-6
• Bearings: NSK (made in Japan)

Dubro Tru-Spin Prop Balancer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Bob Smith Industries CA Glue

Super-Gold+™ Odorless, CA

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

 

Works Best On:

• Rubber
• White Foam

Works Good On:

• Balsa Wood
• Soft Wood
• Hard Wood
• Glass & Metal
• Fiberglass
• Ceramics
• Hard Plastics
• Laminating
• Water-Resistant
• Reinforcing
• CA Hinges

 

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

 

Click to Download Safety Data Sheet

Savage Bobber STOL 74"" (1880mm) Wingspan Balsa Wood Pre-Built ARF Kit or w/ (Motor, ESC, Servos & Prop)