Lemon Rx DSMP (DSMX Compatible) 7-Channel Full-Range Telemetry With Diversity Receiver (Energy Meter Optional)
Description: Lemon Rx DSMP (DSMX Compatible) 7-Channel Full-Range Telemetry With Diversity Receiver (Energy Meter Optional)LM0051U is a cost down version of LM0051 for those who don't require energy meter at the moement. This receiver comes with pre-calibrated battery voltage probe, temperature, RSSI and just about every major telemetry parameter in one tiny package. LM0051U is the world smallest, true full-range telemetry system with build-in sensors along with diveristy receiver shrinked in the smallest possible package. *Optinal current sensor will need to be purcahsed under accessories page and perform one time calibration by user to activate energy meter (mAh, current measurment). Highlight - Energy meter is now an optional item as a cost down version of LM0051 - Function and performance are identicial to LM0052 except with the absent of barometric sensor (altitude and vario information is not available on LM0051) - True full-range diversity telemetry provides plane information in real-time as far as you can fly your plane with any DSMX or DSM2 compatible transmitter - Energy metering system (mAh, V, Current) are included with the provided V/I sensing unit - 2-stage failsafe best suited for gasoline / electric application (Selectable failsafe for pre-defined position as throttle only or all channel failafe in the event of signal absence) - Diveristy extended antenna receiver with state-of-the-art RF circuit providing umatched performance of reception - Real time RSSI output as analog voltage / displayed on transmitter A parameter - Glider may use the inlcuded wiring for battery voltage sensing only if energy metering system is not required for absolute weight reduction - Optional diversity satellite maybe used to provide total of 4 receiving antennas LM0051 telemetry range comparsion with Spektrum and Orange The outstanding telemetry range of LM0051 are tested with Spektrum and Orange telemetry capable receiver as a basic performance benchmark. Please note that for fairness of this testing as the other receiver may not contain diveristy antenna unlike the LM0051, the setup is performed such that diveristy will have no advantage of any range improvement during this test.  Telemetry reporting Below listed telemetry reporting are available with the purchased package. No additional purchase is required. - Included sensors / interface: Pre-calibrated battery voltage probe, Receiver voltage, Temeprature (Internal automatically selected when the inlcuded external temperature probe is not used), RSSI out (3V to 0V) and displayed on transmitter A parameter - Optional energy meter can be purcahsed under accessories page which require one time user calibration (mAh consumed, Current) Telemetry receivers' feature Comparision of Lemon Rx full-range telemetry capable diversity receiver.  - For (*1) V/I sensor may be required to purchase seperately on LM0051U, LM0052U and LM0041 if mAh consumed / current measurment is required RCgroups discussion LM0051 discussion in Lemon Rx Telemetry thread.
User Manual re-direct link (Thanks to John [JJ604 RCgroups] and Nigel in helping us with this user manual.) Quick start-up guide / tips V/I sensor calibration - Pre-calibrated voltage probe is included. Optional energy meter can be purchased seperately under accessories with one time user calibration. Step for setting failsafe Fail-safe activates when the receiver no longer receivers signal (Eg. Transmitter is off / signal loss). There are 3 possible setting which are: - No signal output to servo - Output predefined throttle signal only - Output predefined signal for all channels 1) Insert bind plug 2) Provide power to the unit and bind the unit but do not remove bind plug 3) Set your transmitter to the perferred position as failsafe default output and hold it to this position. 3) press the button briefly will cause the green light to be in the following status. Press the button while maintain your perferred position of the channel: - Green LED status - none: No pulse to servo with the absence of correct reception - Green LED status - flashing: Throttle-only preset. Throttle position had been acquired as failsafe default output - Green LED status - solid: All-channel preset. All channels' position had been acquired as failsafe default ouptut 4) Remove bind plug 5) Turn off the transmitter now while power is still provided to receiver. You can now observe the failsafe status when no transmitter signal is present to the receiver. Please becareful that your propeller may turns if you set throttle channel above 0% in the event of signal losses. Failsafe can be useful as a last rsource to save plane for unexpected situation when the receiver is no longer receiving signal from transmitter such as interference problem. Specification
Note: 1) This is not a Spektrum DSMX or DSM2 product, nor is it a copy of a Spektrum DSM2 or DSMX product. The Spektrum, TM1000, AR9020, DSMX and DSM2 brand is a trademark of Horizon Hobby, Inc. |
20cc EDGE 540 Profile - Yellow w/ Star Burst
| New Design: 20cc Edge Profile Now with Carbon Fiber Reinforcements! SIDE FORCE GENERATORS INCLUDED! Buy Replacement Parts Specifications:
Features:
We DO ship our planes internationally!
Please contact us with your location for more specific cost.
| ||||||||||
20-EDGE-540-Y2
$349.99
Z-Poxy Finishing Resin 12 oz. Set
|
Description:Bob Smith Industries CA Glue Super-Gold+™ Odorless, CASUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Works Best On:
Works Good On:
Avaliable in 2oz and 3/4 Pocket Size. Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.
|
Pt-40
$19.99
Savox SW-0241 MGP Waterproof 1/5 Scale Digital HV Servo with Soft Start, 0.17sec / 555oz @ 7.4V
| Savox SW-0241 MGP Waterproof 1/5 Scale Digital HV Servo with Soft Start, 0.17sec / 555oz @ 7.4V |
SAV-SW-0241MGP
$124.99
