SCORPION A-6528-200kv Motor for Giant Scale Airplane (12S 60-76cc)
Product DescriptionThe Scorpion A - Series line of motors was designed to be the most optimal and premier choice of motor for your freestyle or UAV airplane. We have achieved incredible performance through incredible efficiency. By optimizing the magnets in the rotor, and using the best quality 0.2mm thickness silicon steel stator sheets, and 2 x single strand 1.2mm enamel coated copper wire windings rated above 200C+, the performance and efficiency results are unlike anything we have seen before! Combined with a robust design which has been tested extensively by our world class team pilots for longevity and reliability, we feel this motor checks and exceeds all measurable categories! The A-6528-200kv was designed specifically for 85"-95" Acrobatic Airplanes, or other Sport / UAV airplanes requiring up to 6000w of power. This motor is equivalent to a 60cc/76cc gas engine. We call it 60/76cc because with a 23" prop it is very equivalent to a 60cc gas engine and pulls less amps and therefore could run smaller batteries for lighter overall model weight. Or with a 24" prop it pulls as hard as a 76cc gas engine, with more amps thus requiring a larger battery. Recommended Prop Selection : 23x10E = Efficiency / 60cc performance 24x10E = Optimal / 70cc-76cc performance 24x12E / 25x8E = High Alt Recommended ESC -: Tribunus II+ 14-200A ESC SBEC Acrobatic Weight Range -: 8.18kg - 12.7kg (18.0lbs - 28.0lbs) Sport / UAV (single engine) Weight Range : - 12.7kg - 36kg (28.0lbs -80lbs) Scorpion A-6528-200kv + A-6528 PNP Combo {Official Promo Video}
Specifications
Included in the Box1 x Scorpion A-6528 BLDC Motor Weight including packaging1490g Full DimensionView Scorpion A-6528-200kv Full Dimension
|
RCExl Servo Y
| Description: |
EX-Y
$3.99
Power Board - PRO SERIES - Red (4104)
PB-4104
$139.00
Pitts Python Model 12 Aerobatic 3D Sport Biplane 4S 1067mm (42")
| Pitts Python Model 12 Aerobatic 3D Sport Biplane 4S 1067mm (42") RedwingRC Plug-and-Play aircraft! The Dynam RC C188 can handle low speeds and altitude like a champ! The design of the C-188 has been perfected to give you the most enjoyable flight experience and control. Plus there is factory installed flaps!!! This is a great plane to learn on and a great chance to get used to a low-wing aircraft. All servos, ESCs and motors are factory installed from the Factory. The Detrum brushless motor provides plenty of power for sporty scale flying, extend the flaps on landing for a perfect touchdown in any surface due to the fixed landing gear. Build time is around 45- 60 min from box to air. Expect flight time to be from 8-15 minutes, just depends on how fast you fly.
Key Features:
Specifications:
|
DY8947-Red
$209.99



