Zap Z-42 Blue Thread Locker 0.2oz Bottle

Savox SC-0251 MG Larger Metal Gear Standard Digital Servo, 0.18sec / 222oz @ 6.0V:

Ever go to a restaurant and look at the menu and think to yourself - "there's so many options that all just look so good!" - and have trouble deciding? Well here at Redwing RC our awesome servo collection is very similar! We have a great variety of spectacular servos to choose from so there is something for everyone! But let's introduce yet another great option to consider - the Savox SC-0251.

These SC-0251 are a larger standard size digital servo great for up to a 50cc size aircraft. They are even environmentally friendly - Redwing is going green! Precision made metal gears form a strong and solid framework and strict production and quality control of plastic components ensure high performance! (You know how Redwing RC is a stickler for good quality)

Be sure to order yours today!

Specifications:

• Torque:
  • 180.5 oz/in at 4.8V
  • 222.2 oz/in at 6V
     
• Speed:
  • .20 sec at 4.8V
  • .18 sec at 6V
     
• Voltage: 4.8V to 6V
• Weight: 2.15 oz ( 61g)
• Size: 1.6 x .65 x 1.66 in (40.7 x 16.6 x 42.4 mm)
   
• Gear Type - Metal
• Case- Plastic
• Bearing - dual ball bearings
• Frequency - 200-250hz
• Output Shaft - 25 Tooth Spline

GET YOURS TODAY!

Spark plug for DLE Engines.
 

Lemon RX DSMP 10-CH TELEMETRY STABILIZER & T-PLUG ENERGY METER (DSMX/DSM2 COMPATIBLE)

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port

Understanding the receiver

Setup Instruction

Binding

1. Plug bind plug to the receiver.
2. Provide power to the unit. LED flashes quickly.
3. Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
4. Remove bind plug.

Setting Failsafe

1. Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
2. Ensure that transmitter and receiver are turned on.
3. Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
4. Set transmitter controls to the desired failsafe positions.
5. Press the side pushbutton to memorize failsafe settings.
6. Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
7. Remove bind plug.
8. Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.