Power HD S35 Storm Brushless HV High Torque, High Speed 35.0 kg/ 486.1 oz 0.07 sec 8.4V

Contact UsCustomer Reviews

Power HD S35 Storm Brushless HV High Torque, High Speed 35.0 kg/ 486.1 oz 0.07 sec 8.4V

Market Price: $134.99
Our Price:

$119.99


You Save

11%

Program Box
Quantity (22)

Availability 22 in stock
Weight 0.35 lbs
SKU HD-S35
Manufacturer Power HD

Power HD S35 Storm Brushless HV High Torque, High Speed 35.0 kg/ 486.1 oz 0.07 sec 8.4V

Thought our other servos were great? Well of course they are! But wait until you check out these new Power HD servos - they will rock your wheel pants off* (no wheel pants will be harmed by using this product - but you get the idea).

The S35 replaces the HD Storm 3s and are lighter, much more efficient and perform far superior. They are faster and stronger plus run cooler and quieter with less vibration due to no brush arcings with significantly reduced electronic noise and radio frequency interference.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

New and Improved Technology!

The Power HD S35 HV servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the communicator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these S35 HV servos - so they are not going to be sucking the life out of your Redwing LiFe battery when it doesn't have to - which means not only will you be getting a great and powerful servo - but it's smart! Your "LiFe" will thank you.

This SSR/PGB dual-mode competition-level servo, overcomes the issues of incompatibility between the two branded models. Designed with the convenience of "Automatic Matching" that allows you to plug and use immediately without the need to be tied to the same brand. Also programmable using the Power HD Multi-Function Program Box with servos with the PGB, PGC tag.

Perfect for Giant Scale/3D planes and 1/5 Buggy/Crawler! So now the only question is - why are you still reading this? Go buy your Power HD S50 servos before they're gone!

Specs:

  • Torque:
    • 26.0 kg-cm (361.1 oz/in) at 6V
    • 30.0 kg-cm (416.6 oz/in) at 7.4V 
    • 35.0 kg-cm (486.1 oz/in) at 8.4V
  • Speed:
    • 0.095 sec at 6V
    • 0.075 sec at 7.4V
    • 0.070 sec at 8.4V
       
  • Voltage: 6.0 ~ 8.4 V
  • Weight: 2.65 oz (75g)
  • Size: 1.60 x 0.81 x 1.52 in (40.7 x 20.5 x 38.6 mm)
     
  • Operating Temp- -20~60centigrade
  • Working Frequency - 1520μs / 333hz
  • BRUSHLESS Motor
  • Double Ball Bearings
  • Titanium and Steel gears
  • Water resistant O-Rings
: *
: *
: *
 

30cc Piper Cub - Yellow

The J3 92" Piper Cub is an amazing aircraft for smooth flights and a very scale appearance. The 30cc Piper Cub form RedwingRC has a beautiful color scheme that helps with orientation and leaves you plenty of room for custom graphics. The 30cc Piper Cub is built with high quality balsawood and provides a lightweight airframe that is ridged and strong in all the right places.

The 30cc Piper Cub was made to be an outstanding aircraft. The large rudder, large control surfaces, and aerodynamic nose makes this a very responsive plane in the air.

As with all RedwingRC planes, the 30cc Piper Cub has quality hardware and is a fun build.

Enjoy the sky with the 30cc J3 Piper Cub available at RedwingRC!!!


Flight Video


 


Specifications:

  • Wing span: 92" / 2337
  • Wing area: 78.58sq.dm
  • All up flying weight:
  • Length: 57.6" / 1462mm
  • Cowl:
    • Inside Width:
    • Inside Height:
  • Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
  • Recommended Spinner Size: 3"
  • Recommended CG:
  • Recommended Prop Size:
    •  
  • Recommended Throws: adjust to liking as you fly
    • Low Rates Settings | High Rate Settings
    • Rudder:|
    • Ailerons: |
    • Elevator: |

 

 

Features:
30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes

  • Removable stab
  • Ringed cowl
  • Adjustable push rods
  • Canister ready
  • Fiberglass stab mounts
  • Painted matching spinner (optional)
  • Fast fly and easy build features, such as : pre-drilled hinges, pre-plumbed fuel tank, pre-installed rudder cable,



We DO ship our planes internationally!

Approximate International Shipping Costs (USD) for 30cc Planes:
East Asia
$50
West Asia
$135
Europe
$95
South America
$125

Please contact us with your location for more specific cost.

 

DLE 35ra DLE55



Build & Ship Plane

30-J3Cub-Y

$399.00

Metal Clevis With Hollow Shaft Φ3+M3×L33mm (10 pcs)

Metal Clevis With Hollow Shaft Φ3+M3×L33mm (10 pcs) 

VP-ACC03-Clevis-Rod

$9.99

D200 15A/200W Discharger (use with UPTUP6PLUS, UPTUP7 or UPTUP8)

D200 15A/200W Discharger (use with UPTUP6PLUS, UPTUP7 or UPTUP8)

With this Imax B6AC multi charger, you can charge using a battery at the feild or your ac plug at home! You can charge up to 6 cell batteries. It's capable of charging most types of batteries, LIFE LIPO LION (A123) NICAD NIMH ETC

If you have a splitter you can charge 2/3 cell batteries at once (using an adapter)



Specifications:

  • Input Voltage: DC 11-18V / AC in: 100V-240V 50-60Hz
  • Circuit power: Max Charge: 50W / Max Discharge: 5W
  • Charge Current Range: 0.1-5.0A
  • Discharge current range: 0.1-1.0A
  • Ni-MH/NiCd cells: 1-15
  • Li-ion/Poly cells: 1-6
  • Pb battery voltage: 2V-20V
  • Weight: 531g
  • Dimensions: 134x142x36mm

 

 

 


 

 

 

Features:

  • iMax B6AC 1-6 Cells Digital Multifunctional Balance Charger
  • 100-240v AC input or 11-18V DC input
  • Microprocessor controlled
  • Delta-peak sensitivity
  • Individual cell balancing
  • Li-ion, LiPo and LiFe capable
  • Ni-Cd and NiMH capable
  • Large range of charge currents
  • Store function, allows safe storage current
  • Time limit function
  • Input voltage monitoring. (Protects car batteries at the field)
  • Data storage (Store up to 5 packs in memory)
  • Battery break in and cycling.

 

 


 

 

Package Contents:

  • iMax B6AC 1-6 Cells Digital Multifunctional Balance Charger
  • 4mm Banana Plug to Male Deans style connector
  • A female Deans style connector to a pair of Alligator clips
  • A female Deans style connector to a female Futaba style servo connector
  • A female Deans style connector female JST style connector
  • A female Deans style connector to Glow Plug type connector
  • Power Cord
  • User Manual

 

 

 

 

 

UPTUPD200

$89.99