1/8 Shogun XP 4WD Truggy 6S Brushless RTR (No Battery or Charger)
Rule the Track with the Shogun Racing Truck!
Want to dominate the track and stay ahead of your friends? The Shogun is going to be at the top of the timing sheets! The Shogun from Team Corally is simply the meanest, baddest, and roughest LiPo-powered truck on the planet! Fitted with a 2050KV motor that can take up to 6S power, the Shogun is super-fast on dirt, gravel, grass, jumps and more! If you want massive speed and huge air in a racing truck package, you have found your perfect vehicle!
With a super-durable, all-metal four-wheel drivetrain, fully independent competition-style suspension, racing chassis, and aerodynamic racing design, this is the ultimate basher truck for anyone looking for fun!
Capable of 2S-6S operation, the Kronos XP arrives completely assembled and ready to run. Simply add 4 AA transmitter batteries and a suitable battery and charger for the ultimate in speed, performance, durability and handling.
For the complete story and all of the details on the Shogun XP, CLICK HERE
Features:
Pre-built racing style truck with electronics, bodyshell and tires installed
Team Corally TOROX 185 ESC 3-6S with LiPo protection (programmable)
Team Corally Kuron 2050kV 4-pole brushless motor 2-6S
Varioprop CR-7220-MG High Torque Digital Servo, Metal Gear, 20 Kg Torque
Aluminum servo arm
Ergonomic Varioprop S2R transmitter, with interference-free 2.4GHz technology
Separate splash-proof and dustproof electronic box with transponder mount
Adjustable battery holder for all common LiPo batteries
Full set of ball bearings, rubber sealed
All transmission ball bearings are 8x16x5mm
Hardened steel spur gear and motor pinion
Three silicone fluid-filled + sealed metal differentials with quick access design
Quick + Easy diff access
2-piece aluminum motor holder with composite gear cover
Complete metal drive train
Steel front CVD joints
Aluminum 17 mm drive hexes
Oil-filled threaded 16 mm aluminum Big Bore shocks
Team Corally SPL shock spring perches locking system
Milled aluminum shock towers, 5mm rear / 4mm front
Independent Pivot Ball front suspension
Independent double wishbone rear suspension
Reinforced truck front steering blocks and rear hubs
Aluminum suspension mounts with composite cover
Full set of machined steel turnbuckles with 7mm hexes
Individually adjustable chassis and steering geometry
Team Corally RSP anti-roll bar system, front + rear
Aluminum chassis plate
Bash-proof double chassis brace system
Front bumper with chassis protection
Center Roll cage mount
Reinforced high downforce wing + adjustable wing holder
Pre-glued low-profile multi-pin pattern tires on black 7-spoke nylon rims
Sturdy, elaborately printed polycarbonate body
Huge selection of custom tuning products available
110+ km/h (70+ MPH) possible
Specifications:
Scale: 1:8
Length: 495mm
Height: 175mm
Width: 308mm
Wheelbase: 327mm
Weight (no battery): 3250g
Ground Clearance (max): 45mm
Wheel Hex Size: 17mm
Wheel Size (diameter, width): 111x42mm
Internal Gear Ratio: 10.89 (MOD 1)
Required items:
Four (type AA) batteries, 7.2-22.2V LiPo battery with XT90-connector, compatible charger
All NEW design! These Miracle aluminum spinners have back plates which have extensive lightening, the spinners are cut for a large 3d style prop, and the back plates are drilled for multiple engine sizes!
FOR ENGINE SIZE:
2.5" Spinner : DLE 20, Enya FS120, All YS Four Strokes and any that match these
3" Spinner: DLE 30, DLE 35RA, DLE 55, DLE 55RA, MLD 28, DA 50, 56, 58, and EVO 54 (and any other engines that fit these templates
3.5" DLE 30, DLE 35RA, DLE 55, DLE 55RA, MLD 28, DA 50, 56, 58, and EVO 54 (and any other engines that fit these templates
SPECS:
2.5": Height 2.7", weight 2.7oz, includes 30mm bolt.
3": Height - 3.1", weight 3.2 oz, includes 55mm bolt.
3.5" : Height 3.7", weight 3.6oz, includes 60mm bolt.
Miracle RC Aluminum Spinners are high quality CNC Machined spinners. Very light, with a lightened back plate included. Very accurate, very beautiful, and a great value!
