The Redwing RC Office will be operating with reduced staff until 24 Jun. Orders can still be accepted during this time but will take longer than usual to process/ship. If you need the item urgently (moved to top of the list), select Priority express and we will do our best to rush the order out to you as quickly as possible.

Ford F450 KG1 Edition 1/10 4WD RTR, Grey Titanium

Ask a question about this product

Printable version

Options

Our Price:

$399.99

Quantity (2)

Details


Availability	2 in stock
Weight	7.50 lbs
SKU	CEG8987

Ford F450 KG1 Edition 1/10 4WD RTR, Grey Titanium

CEN Racing official Licensed FORD F450 SD KG1 Wheel Edition 1/10 4WD RTR (Grey Titanium) Custom Truck DL-Series.

True 1/10 scale RTR. Body length 26.7 inch (678.18mm) true body scale truck.
Features:

KG1 FORGED Trident-D wheels. Front 35mm, Rear 31mm per wheel
REALISTIC textured bed linear coating
90mm Aluminum pewter anodized shock housing
Black Anodized lower and upper links
RED anodized shock springs
ESC-40A WP-1040-Brushed (Powered by HobbyWing): Water-proof and dust-proof for all weather; Built-In Capacitor Module; Automatic throttle range calibration; Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery; Over-Heat protection and throttle signal loss protection; Easily programmed with jumpers
Motor-RS-550 high Torque Motor - Power by Mabuchi Motor
Servo -12Kg Servo O.E.M. by Savox: 4.8V 0.26 sec/60deg 10.0 kg-cm; 6.0V 0.23 sec/60deg 12.0 kg-cm; 25T Horn Gear Spline
Radio System: Pistol-Grip AMP 30 3 Channel Transmitter; Digital Trimming; Steering Dual-Rate (ST D/R) Adjustment; End Point Adjustment (EPA); Built in Failsafe
Chassis: Steel Frame Rails; CMS (Chassis Mounted Servo) Chassis Design; Stamped Steel Shock Hoops; Steel Skid Plate; Full Precision Ball Bearing Support; Adjustable Turnbuckles; High Torque Servo Horn Safer
Suspension: 3 Links Suspension with Panhard Bar Design; Aluminum shock housing; Big Bore Oil Filled Adjustable Coil Over Shocks; Harden Steel Steering Drag Link; 6mm Aluminum Linkage; 90mm shock housing
Drivetrain: Sway bar included; 4 Wheel Drive; Center Shaft Drive Train for more power transferred to the wheels; Highly Efficient Transmission System; Wide Range Easy Changeable Gear Box Design; Sealed transmission eliminates dirt and dust; Sealed Axle housing; 5mm Hardened Steel Axle shaft; Differential Center Locker Front/Rear Planetary Gear Type; Metal Transmission Gears; Planetary Gear type Differential

Specifications:

Length: 26.70 inch (678.18mm)
Width: 11.41 inch (290mm)
Wheelbase: 17.60 inch (447mm)
Ground Clearance: 2.52 inch (64mm)
Weight: 2.51 lb (2.5kg)

Add the KAOS Aluminum Tow Hitch w/ 5.8mm Pivot Ball Bolt, Ford F450 SD for $29.99.

There are numerous parts that we can get for the F450. Send us an email at [email protected] for your request.

Lemon RX DSMP 7-CH RECEIVER (DSMX/DSM2 COMPATIBLE)

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite

Type:	DSMX Compatible Full Range Receiver
Number of Channel:	6
Modulation:	DSMX Compatible (Also DSM2 backward Compatible)
Band:	2.4 GHz
Dimension:	25(L) x 18(W) x 11(H) mm
Weight:	4.5 grams + 2.5 grams
Voltage Range:	3.45 - 8.4 V

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port

Understanding the receiver

Setup Instruction

Binding

Plug bind plug to the receiver.
Provide power to the unit. LED flashes quickly.
Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
Remove bind plug.

Setting Failsafe

Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
Ensure that transmitter and receiver are turned on.
Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
Set transmitter controls to the desired failsafe positions.
Press the side pushbutton to memorize failsafe settings.
Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
Remove bind plug.
Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.