USB Program Card for AGFrc Servos
AGFrc AGF-SPV2 USB Program Card for AGFrc Servos with ASS marking This card is the "Plug and Play" type USB programming card. It is easy to use and program the AGFrc programmable servos. Please note that this USB program card can only be used for AGFrc servos with ASS marking. If you have questions for which AGFrc servo can be programmed, pls contact us for details. Software download from here: https://www.agfrc.com/index.php?id=download-center System Requirements:
Software Menu Instructions: The centre part is for information display window, while connect/ disconnect program card, or write/ Read servo parameter, it will show information.
Parameter Function Instructions:
Usage Instructions:
Servo Firmware Update Instructions 1. While connected with the servo, click "UPF", select the upgrade firmware from the pop-up window, and click to upgrade(as below pic)
2. During upgrading, information window will hint upgrade process, it will shows "Success Update" once completed(as below pic).
3. After finished updated the servo firmware, please click to “Read” the parameter first on the software interface.
|
12V Smart Servo, USB Programmable, Waterproof, Mega Torque 60KG (834Oz)
12V Smart Servo, USB Programmable, Waterproof, Mega Torque 60KG (834Oz) |
AGF-SA86BVMW
$145.99
Bob Smith Industries Insta-Set
Untitled Document Description:Bob Smith Industries Insta-Set Insta-Set™INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
Directions: After joining parts with cyanoacrylate (CA, super glue), spray the seams with Insta-Set™ to cure the CA in 8 seconds. A bead of CA can then be applied to the outside and corners of joints before another application of Insta-Set™ to reinforce their strength. Insta-Set™ can also be applied to one part (with CA on the other) before joining for difficult to bond materials. Insta-Set™ is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.
Works Best On:
Click to Download Safety Data Sheet
|
BSI-AC-151
$5.99
FUTABA 16SZA 2.4GHz FASST Airplane Spec Radio System w/ R7008SB Receiver
FUTABA 16SZA 2.4GHz FASST Airplane Spec Radio System w/ R7008SB Receiver
Product DescriptionWith 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.
Features
Standard Programming
* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions |
HRP-FUT01004355-3
$819.99
1/18 Tetra18 X1T RTR Scale Mini Crawler, White
1/18 Tetra18 X1T RTR Scale Mini Crawler, Black |
PHT1805W
$129.00