Enduro24 Sendero Crawler Trail Truck RTR, Black and Yellow

Ask a question about this product

Printable version

Options

Market Price: $145.99

Our Price:

$99.99

You Save

32%

Quantity (15)

Details


Availability	15 in stock
Weight	2.00 lbs
SKU	ASC20180

Enduro24 Sendero Trail Truck RTR, Red & Blue

The Enduro24... A blast to drive! Whether it's outside on the trail or in the comfort of your own living room, there's no doubt this little rig will overcome the challenge. This small-scale, 4-wheel-drive crawler comes equipped with many features found on larger size rigs. Full-time 4-wheel-drive transmission with divorced transfer case, metal vertical chassis rails, and 4-link suspension ensure climbing over obstacles will be a breeze. Providing power and control is a 2-in-1 receiver/ESC, 2-channel radio, powerful servo, and single-cell LiPo. You get all this and more packed into a convenient package.

Don't let the small size and low speed deceive you--the Enduro24 Trail Truck with Sendero body can provide hours of challenging driving and scale fun! No matter your skill level, there's plenty of fun for everyone.

Just install the batteries, charge, and go! Right out of the box, the Enduro24 RTR is ready for adventure... Are you?

Features:

Single-piece polycarbonate Sendero body. Models available in two color schemes: #20180 Black and yellow. #20181 Red and blue.
2.4GHz 2-channel radio
2-in-1 receiver and ESC combo
Single-cell LiPo battery included
Charger included
Soft compound rubber tires
Soft, coil-over shock absorbers
Telescoping center driveshafts
Removable front bumper
Adjustable body posts
Steel pivot balls

Lemon RX DSMP (DSMX/DSM2 COMPATIBLE) MICROBRICK WITH 2 ON-BOARD SERVOS and MOLEX 1.25MM CONNECTOR PACKAGE

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite

Type:	DSMX Compatible Full Range Receiver
Number of Channel:	6
Modulation:	DSMX Compatible (Also DSM2 backward Compatible)
Band:	2.4 GHz
Dimension:	25(L) x 18(W) x 11(H) mm
Weight:	4.5 grams + 2.5 grams
Voltage Range:	3.45 - 8.4 V

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port

Understanding the receiver

Setup Instruction

Binding

Plug bind plug to the receiver.
Provide power to the unit. LED flashes quickly.
Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
Remove bind plug.

Setting Failsafe

Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
Ensure that transmitter and receiver are turned on.
Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
Set transmitter controls to the desired failsafe positions.
Press the side pushbutton to memorize failsafe settings.
Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
Remove bind plug.
Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.