Skylark-S F3A 15e 37" (950mm) - PNP

BE-62 Engine

Check out the BE-62 single cylinder gas engine from Bull Engine!

The BE-62 uses ceramic cylinder technology for long engine life. Other features include a genuine Walbro carburetor, factory installed steel insert for spark plug in the head, a common 30mm diameter 4 bolt prop circle, auto advance electronic ignition, and a billet aluminum CNC machined crankcase. The BE-62 is complete with muffler, ignition, NGK plug, and a three year USA warranty.

Enjoy your Bull Engine Today!

Specs:

• Displacement: 62.1cc (3.78 ci)
• Output power: 6.0hp
• Weight: Engine: 1470g (51.8 oz)
• Exhaust Muffler: 100g (3.5 oz)
• Ignition: 125g (4.4 oz)
• Total: 1695g (57.3 oz or 3 lb, 9 oz)
• Bore: 46.5mm (1.83in)
• Stroke: 36.6mm (1.44in)
• Rpm Range: 1300-8000
• Recommended Prop Size: 23x8 - 24x12 (Break-in with 23X8)
• Carburetor: Genuine Walbro
• Fuel: Gasoline pre-mix with 2 stroke oil 
• Oil Ratio and Type:
  • For Break-in, 30:1 conventional 2 stroke oil for air cooled engines
  • After Break-in, 40:1 full synthetic 2 stroke oil for air cooled engines
• Ignition: Electronic Auto Advance
• Ignition Battery: 4.8 – 8.4 Vdc
• Spark plug: NGK CM-6
• Bearings: NSK (made in Japan)

Dream-S F3A 50e /50 Class 54" (1380mm) - PNP

FREE Shipping US only--contact us at [email protected] to calculate international shipping cost

*Free shipping is for continental US only

RedwingRC Plug-and-Play aircraft!

Now this is a unique plane for sure! Upgrade that asphalt runway of yours to a pond, lake or pool! The PBY Catalina seaplane is something you have to experience! It took months of flight testing and designing to produce this amazing aircraft. The Catalina is capable of stable flight at really slow speeds making it perfect for any skill level. Get ready for some really neat details and a large 55 inch wingspan! The Catalina is blast to fly and and landing on on water is a piece of cake.

Key Features:

• Powerful twin 480 size (1100kv) outrunner brushless power system w/ 3-bladed props
• Twin 30A Brushless ESC with Switch-Mode BEC
• Durable and lightweight EPO construction with many surface details
• Excellent Flight Performance
• Detailed Body Structure
• Suitable for Both Intermediate and Experienced Pilots.
• Removable / detachable wing. (4 screws)

Specifications:

Lemon RX DSMP 7-CH TELEMETRY STABILIZER & VOLTAGE PROBE (DSMX/DSM2 COMPATIBLE)

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port

Understanding the receiver

Setup Instruction

Binding

1. Plug bind plug to the receiver.
2. Provide power to the unit. LED flashes quickly.
3. Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
4. Remove bind plug.

Setting Failsafe

1. Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
2. Ensure that transmitter and receiver are turned on.
3. Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
4. Set transmitter controls to the desired failsafe positions.
5. Press the side pushbutton to memorize failsafe settings.
6. Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
7. Remove bind plug.
8. Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.