MULTIPLEX (MPX) Triple Servo Harness 6" Male 6" Female (3 Channels 1 Plug) 20 AWG

Contact UsCustomer Reviews

MULTIPLEX (MPX) Triple Servo Harness 6" Male 6" Female (3 Channels 1 Plug) 20 AWG

Market Price: $19.99
Our Price:


You Save


Quantity (29)

Availability 29 in stock
Weight 0.20 lbs
SKU MPX-Triple-6/6

MPX High Amp Triple Servo Harness with 6" Male/6" Female 20 AWG 100 Strand wire

Running 6 aileron servo's or flaps, ailerons and gear on each wing panel?  Tired of marking and making 6 connections all the time?  Redwing RC offers the perfect solution!

This high quality accessory provides a faster and easier field assembly with a much cleaner install.  Simply attach your servo extensions to the female MPX plug extension and plug the JR connectors of the male MPX extension into the receiver.  This version has a flanged male MPX connector suitable for permanently mounting to your fuselage providing a simple one plug interface for each wing and is the perfect solution for 42% 3 servo wing panels.  Also great for warbirds and jets! One channel can be ailerons, one for flaps and one for electric landing gear! Most installations will require 2 sets, one for each wing panel.

1 Set Includes:  1 male MPX with flange and (3) 6” 20 AWG wires with JR connectors and 1 female MPX with (3) 6” 20 AWG wires with female universal pin connectors for servos.

WARNING PLEASE READ BEFORE PURCHASE and USE:  This harness has 3 outputs, two of which share common ground. If you are using this product for retracts, carefully pull back the shrink wrap and find the output not sharing with another! If you do not, you can cause your retract controller to fail as they don't like constant voltage. When your find the stand alone output this is safe to use with retracts, flaps, and ailerons.


: *
: *
: *

RCEXL Optical Kill Switch

The Optical Kill Switch for gas rc planes, allows you to safely and remotely kill your electronic ignition. It is Fiber Optically Coupled to isolate your ignition system from your radio system so there is NO interference


  • Includes a remote mountable bright LED to indicate when the ignition is armed.
  • Fiber Optic coupled input/output.
  • Li-Po/Li-lon/A123/Ni-Mh/NiCad Input.
  • Up to 20 Volt 16 amp MOS-FET(IRF7456) output.
  • Low to 3Volt 3amp output.
  • Low Voltage Drop-Less than 150mv.
  • 100% Surface Mount Technology.
  • Heavy Gauge Wires,universal connectors.
  • Small and light weight –only 0.3 OZ!(8g)
  • Reverse Bettery input protection.
  • Shut down the transmitter power or receiver to cut off automatically when kill engine


RCEXL-Opto kill


Rcexl Walbro Style Weighted Felt Fuel Clunk

Rcexl Walbro Style Weighted Felt Fuel Clunk

Fuel clunks are a must for aerobatic flying. It insures that fuel is always flowing to the engine because the fuel line will follow gravity inside your tank. Without one, you increase the chance that your plane may stall when flying inverted or performing different maneuvers. Installing a fuel clunk is simple to install and an investment that any serious pilot should make.


.4 oz



MULTIPLEX (MPX) Dual Servo Harness 6" Male 6" Female (2 Channels 1 Plug) 20 AWG































































































Male Deans to Male XT60 Connector

With this Deans to XT connector you can convert a battery with T-Plug to XT-60 on ESC / charger
The connector has many applications and can be used for charger adapter.


  • Male Deans T style plug to Male XT60
  • Durable design
  • Heatshrink seal