Products Map - RedwingRC.com

Ford F450 KG1 Edition 1/10 4WD RTR, Grey Titanium

Ford F450 KG1 Edition 1/10 4WD RTR, Silver Mercury

Fortune 612 III 2.4GHz RTR Sailboat 

This item is a must have if you are running a smoke system. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes. Mounting dual tanks has always been tough because most aircraft have lightning holes right where you need to place the velcro straps. With this tray you mount it to the aircraft tank floor with wood screws. Then you can easily mount the tanks with just one velcro strap on the back of the tanks.

This item is a must have if you are running a smoke system. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes. Mounting dual tanks has always been tough because most aircraft have lightning holes right where you need to place the velcro straps. With this tray you mount it to the aircraft tank floor with wood screws. Then you can easily mount the tanks with just one velcro strap on the back of the tanks.

This item is a must have if you are running a smoke system. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes. Mounting dual tanks has always been tough because most aircraft have lightning holes right where you need to place the velcro straps. With this tray you mount it to the aircraft tank floor with wood screws. Then you can easily mount the tanks with just one velcro strap on the back of the tanks.

This item is a must have if you are running a smoke system. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes. Mounting dual tanks has always been tough because most aircraft have lightning holes right where you need to place the velcro straps. With this tray you mount it to the aircraft tank floor with wood screws. Then you can easily mount the tanks with just one velcro strap on the back of the tanks.

Fortitude Fuel Can Fittings(FORA 1006):
This set will convert your fuel supply can to accept our FORA1007 Aircraft Fueling Fittings Set. Can be used in line with any existing fueling fitting you might be using on your fuel supply can. Seals out the atmosphere 100% so you don't have to worry about the fuel going bad as quickly. Barbs are for 1/8" ID fuel tubing. Can be used with Glow, Petrol, and Smoke.

Aircraft Fill/ Vent Fittings (FORA 1007):
These nylon fittings weigh practically nothing and only require a 1/4" hole drilled into your aircraft to mount them. The caps and filler have a double sealing surface assuring they won't leak. You can mix and match the parts for multiple applications.

A typical example would be to use one fitting for fill and the second for the vent line. This gives you a nice clean look on the cowling and you don't have to worry about the vent coming loose and bouncing around in your fuselage. If you fly at a field that requires an over flow catch tank you can use one of the extra filler fittings to quickly attach the catch tank on the vent fitting while filling the tank. A half turn twist and the over flow catch tank is detached and your ready to fly. The threads are 1/4x28UNF and are 5/16" in length. Barbs are for 1/8" ID fuel tubing. Can be used with Glow, Petrol, and Smoke.


TEMPORARILY OUT OF STOCK. Add to cart to PRE ORDER and we will ship ASAP

Makes mounting a single fuel tank or smoke tank much easier and stronger than with velcro straps alone. This tray design captures the neck of the tank for an exceptionally strong mounting solution. Works really well in warbirds and narrow fuselages where the installation is difficult to access. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes.

Makes mounting a single fuel tank or smoke tank much easier and stronger than with velcro straps alone. This tray design captures the neck of the tank for an exceptionally strong mounting solution. Works really well in warbirds and narrow fuselages where the installation is difficult to access. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes.

Makes mounting a single fuel tank or smoke tank much easier and stronger than with velcro straps alone. This tray design captures the neck of the tank for an exceptionally strong mounting solution. Works really well in warbirds and narrow fuselages where the installation is difficult to access. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes.

Makes mounting a single fuel tank or smoke tank much easier and stronger than with velcro straps alone. This tray design captures the neck of the tank for an exceptionally strong mounting solution. Works really well in warbirds and narrow fuselages where the installation is difficult to access. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes.