Products Map - RedwingRC.com

2.5 Gallon Smoke with DLE Hand Pump

This can is pre assembled with battery and ready to go it just needs fuel.  You can use this can with the ease of safety with the steel can and the spark arrester this safety can meets all requirements for [D.O.T] safest can in the industry. This gas can has a spring blow by lid for pressure release.

Contents of the Fueler
- 2 gallon steel safety can
- 3 feet of recoil fuel lines for easy and quick fueling
- Funnel for easy pour
- 9.9v 3s 2100mah battery
- On/off switch with charge jack
- Fire and water resistant box that contains all items
- Miracle fuel filling nozzle
- Pick up fuel filter and filter in fuel nozzle for double filtration

***Important to note is that this new fueler is metal and not plastic for safety reasons***

2.5 Gallon with DLE Hand Pump (For Glow)

This can is pre assembled with battery and ready to go it just needs fuel.  You can use this can with the ease of safety with the steel can and the spark arrester this safety can meets all requirements for [D.O.T] safest can in the industry. This gas can has a spring blow by lid for pressure release.

Contents of the Fueler
- 2 gallon steel safety can
- 3 feet of recoil fuel lines for easy and quick fueling
- Funnel for easy pour
- 9.9v 3s 2100mah battery
- On/off switch with charge jack
- Fire and water resistant box that contains all items
- Miracle fuel filling nozzle
- Pick up fuel filter and filter in fuel nozzle for double filtration

***Important to note is that this new fueler is metal and not plastic for safety reasons***

Description:

20 Function Charge Adapter to Male 4mm Bullets - 300mm Wire 

Known around our office as the "giant squid", this charge adapter is an absolute must for your store's service department and for experienced, diversified consumers. Includes the following plugs to address most any charging requirement: Futaba TX, JR TX, Universal RX, EC5, EC3, EC2, XT90, XT60, T-Plug, Tamiya-style Molex, Mini Tamiya-style Molex, EFL/BLH micro, Hubsan-style micro, Glow Plug (for charging Ni-Starters), HC (Traxxas-style), XH-style micro, Molex mini, JST, XL JST (Mini-T style connector), and finally a blank set of wires to add any type of connector we may have forgotten. This is absolutely the finest and most versatile charging squid you or your customers may ever need. 

30-50 CC TAIL CRADLE

20-50CC Model Cradle

200 Meters Bulk JR High Grade 20 AWG Servo Extension Wire (Twisted Orange, Red, Brown)

High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
 

• Soft flexible silicone casing
• Heavy duty 22awg
• Universal - XQ Power/Hitec/Power HD/JR/more...
• Reliable! We've NEVER gotten a pair returned
  
  Prices
  • 2" 1 pair - $2.50
  • 2" 2 pair - $4.50
  • 2" 3 pair - $6.99
     
  • 3" 1 pair - $3.50
  • 3" 2 pair - $6.50
  • 3" 3 pair - $8.99
     
  • 6" 1 pair - $3.99
  • 6" 2 pair - $6.99
  • 6" 3 pair - $9.99
     
  • 8" 1 pair - $3.99
  • 8" 2 pair - $6.99
  • 8" 3 pair - $9.99
     
  • 10" 1 pair - $3.99
  • 10" 2 pair - $6.99
  • 10" 3 pair - $9.99
     
  • 12" 1 pair - $4.99
  • 12" 2 pair - $8.99
  • 12" 3 pair - $12.99
     
  • 14" 1 pair - $4.99
  • 14" 2 pair - $8.99
  • 14" 3 pair - $12.99
     
  • 16" 1 pair - $4.99
  • 16" 2 pair - $8.99
  • 16" 3 pair - $12.99
     
  • 18" 1 pair - $6.99
  • 18" 2 pair - $10.99
  • 18" 3 pair - $13.99
    
    
  • 24" 1 pair - $7.99
  • 24" 2 pair - $12.99
  • 24" 3 pair - $15.99
     
  • 28" 1 pair - $7.99
  • 28" 2 pair - $12.99
  • 28" 3 pair - $15.99
     
  • 32" 1 pair - $7.99
  • 32" 2 pair - $12.99
  • 32" 3 pair - $15.99
     
  • 36" 1 pair - $8.99
  • 36" 2 pair - $14.99
  • 36" 3 pair - $17.99
    
    
  • 44" 1 pair - $8.99
  • 44" 2 pair - $14.99
  • 44" 3 pair - $17.99
     
  • 48" 1 pair - $8.99
  • 48" 2 pair - $14.99
  • 48" 3 pair - $17.99
     

200lb x 500' Braided Dacron

2028 Extreme 4-Pole Sensored Brushless Motor (800Kv)

Replacement Switch and wire for Miracle switches.

With this switch and wire, you can easily replace a switch in a Miracle RC product. Perfect for if you have a crash and you want to be sure the switch is in perfect working condition. Or if you accidently damage your Miracle switch while working with it.

Just simply unscrew your old Miracle switch, loosen the grub screw that holds the plastic plug, and place the new one in. In about 5 minutes you'll have a brand new conditioned Miracle switch
 

20cc Aluminum Landing Gears

Untitled Document

Carbon Fiber Landing Gear for 20cc Planes.
Fits the 20cc Sbach Profile and the 20cc Yak Profile. Strong woven carbon fiber landing gear. Please note, the Carbon fiber landing gear is slightly lower/shorter than the aluminum landing gear but still allows clearance for a typical GAS prop. Longer E props may not clear as easily.

Dimensions (see reference photo):

A= 1"

B= 2 1/4"

C= 6 1/2"

D= 1"

E= 5/8"

New Design: 20cc Edge Profile

Description:
Now with Carbon Fiber Reinforcements!

SIDE FORCE GENERATORS INCLUDED!

We are growing again with the addition of the 20cc Edge 540 profile! The Edge 540 is known for its unsurpassed harrier and slow alpha flight capability and this 20cc version is no different.

Enjoy smooth clean knife edge and similar maneuvers as well as very predictable smooth 3D. Very even rolling harriers, easy hover and torque rolls - this plane is a GREAT learning tool with the wonderful advantages of gasoline.

This new 20cc Edge 540 comes with the same great features that Redwing provides with all of our profile planes. It is set up and ready for a DLE 20 to be mounted right in - or try going electric with our new Tomcat Electric Motors with a little adaptation. A neat feature of the 20cc Edge is that is has a carbon fiber tube running the FULL length of the fuselage for added strength. Even those not fans of profiles will fall in love with this beauty! Holds the DLE 20 or DLE 20RA perfectly and the 20cc Extra 330 profile has a beautiful red and silver covering job

The 20cc Edge 540 profile comes in 2 new attractive schemes designed by Adam Strong. Get them while they are in stock. The last time we added one of our affordable new lines of profiles we ran out in weeks! Don't let this one slip by.

Buy Replacement Parts
Product Manual

Specifications:

• Wing span: 1651mm / 65"
• Wing area: 69.2 sq. dm/ 1072 sq. in
• All up flying weight: 3100g / 9 lbs
• Length: 1587.5 mm/ 62.5"
• Engine: DLE 20 / DLE 20RA
• Radio: 5 channel
• Recommended Spinner Size: 2.5"
• Recommended CG: 5.25" from the leading edge at the root
• Recommended Prop Size: 17x6
  •  
• Recommended Throws:
  • Low Rates Settings | High Rate Settings
  • Rudder: |
  • Ailerons: |
  • Elevator: |

Features:

• Adjustable push rods
• Carbon fiber tube running the FULL length of the Fuselage
• Carbon fiber Wing Tube
• Fast fly and easy build features, such as : Pre drilled hinges
• Removable wings
• Ball linkages

We DO ship our planes internationally!

Please contact us with your location for more specific cost.