Browse ALL planes

GT1500 F5J/P5B Competition Grade CF Powered Glider (1.5M) PNP 

Landing Gear w/ Wheel Pants, (EPP or Micro Plane)

31.5" EPP 3D Airplane YAK55 Features: • Kit version - Assemble and install your choice of electronics • All hardware accessories included in kit • Durable EPP material with realistic printing resemblance of a shark • Simple to build Specification: Wingspan: 800mm Length: 875mm Flying Weight: 400g Suggested Power System: Motor: 2212 1400KV ESC: 20A Servo: 9g *4 Propeller: SF 8-9inch Radio: more than 4CH BATT: 2S 1200-1500mAh (Not incl.) Different versions supplied as below: E1701=E17 YAK55 KIT+APC SF9047 E1702=E17 YAK55 KIT+Motor(2212 1400KV+3.5mm Banana Male Plug+3.0mm Prop Adapter) E1704=E17 YAK55 KIT+Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4)

Dynam Albatros D.Va 1270mm (50") Wingspan - PNP

RedwingRC Plug-and-Play aircraft!

Check out this really interesting design in the Warbird series- The Messerschmitt BF-110. This is such a great plane and because its constructed with damage resistant EPO foam it is very durable and will last along time. The Messerschmitt BF-110: 2X the motors, 2X the fun!!!

This model come with Flaps, Retracts, 2 ESCs, 2 Motors, and all the required servos. (Flaps will require a servo reverser either external or on the Transmitter). The build on this one is very easy and straight forward. The only surprise is the minimal work needed to get this plane in the air.

The twin motors will provide more than enough power and a majority of the flight can be flown at 50% throttle.

** Please note: It is important to calibrate the throttle and check the settings for both motors since this is a twin.

Video:

Key Features:

• 6 Servos - Flaps factory installed (requires a servo reverser to use the flap servos)
• Factory installed retracts with spring loaded retract door
• Dual powerful dectrum motors installed
• Spring loaded retract doors

Specifications:

NEW, 30cc Edge 540, full fuse, DLE, PTE, RedwingRC
We are growing again with the addition of the 30cc "Strong Design" Edge 540 V3. This 30cc SD EDGE was designed from the ground up by aeronautical engineer Adam Strong. Tested, perfected and approved, to make sure this is going to be the best 30cc Edge out there, in flight and quality/features. It is carbon fiber rich, in the wings fuselage and the accessories.

The Edge 540 is known for its unsurpassed harrier and slow alpha flight capability and this 30cc version is no different, and specially designed by Adam Strong to take advantage of the scale planes tendencies, but added thought into what you want out of a modern day RC plane. Prepare to be amazed!

Enjoy smooth clean knife edge and similar maneuvers as well as very predictable smooth 3D. Very even rolling harriers, easy hover and torque rolls - this plane is a GREAT learning tool with the wonderful advantages of gasoline. 

This new 30cc Edge 540 comes with the same great features that Redwing provides with all of our planes. It is set up and ready for a DLE 30 or 35RA to be mounted right in - or try going electric with our new Tomcat Electric Motors with a little adaptation. A neat feature of the 30cc Edge is that is has a carbon fiber reinforcements in the fuselage and wings for added strength.

The 30cc Edge 540 is available in 3 new attractive schemes designed by Adam Strong. Get them while they are in stock. This is a great new plane so don't let this one slip by.

Product Manual

Check out this awesome plane in action!

Specifications:

• Wing span:
  • With tips:78.5
  • Without tips: 75"
• Wing area: 1145 sq. inches (wings and stabs measured ONLY) More surface area when considering fuselage
• All up flying weight: 10.5 to 12 lbs.
• Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
• Recommended Spinner Size: 3"
• Recommended CG: 5" to 5.75" from the front half of wing tube
• Recommended Prop Size: 18x8 to 20x8
• Recommended Throws: adjust to liking as you fly LOW MED HIGH

  AIL 1.75”/30% 2.75”/40% 4”/60%

  ELE 2.5”/30% 3.25”/ 40% 4”/55%

  RUD 2.5”/20% 3”/ 30% 4.25”/40%

  
  
  
  
  

Features:

• Removable stab
• Ringed cowl
• Canister Tunnel built in
• Painted matching spinner (available separately)
• Includes a black plastic spinner
• Optional integrated air deflector for venting hot cowl air
• Fast Fly Feature: Pre-installed hinges (except rudder)
• Carbon Fiber Retention Pins in stabs
• Fiberglass tabs on stabs (stronger than wood)
• Carbon Fiber Wing Tube
• Metal Servo arm set
• Removable Side Force Generators / Racing Wing tips

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

Value Planes Leprechaun 102" (2600mm) Vintage Electric Glider Kit

Savage Bobber 39.4" (1000mm) Wingspan Balsa Wood Pre-Built ARF-PNP

Dancing Wings PT-17 Stearman 1600mm Balsa ARF

Dancing Wings PT-17 Stearman 1600mm Balsa Kit --available as ARF or ARF with Power Pack

The Stearman Model 75 is a biplane formerly used as a military trainer aircraft, of which at least 10,626 were built in the United States during the 1930s and 1940s. Stearman Aircraft became a subsidiary of Boeing in 1934. 

T-1800 71" (1800mm) Wingspan EPO Sport Glider PNP

20cc MXS-R 64" V2 with quick release wings and CF reinforced

Description:
Here is the all new REDWING RC MXSR 30cc plane. This is a Redwing RC exclusive - and while others may have a similar MXS-R, we revised our prototype several times, before ordering in "whatever" the factory had in stock. Our ELITE planes are all designed by our team, with one of our advisers being a previous designer for Boeing. Lots of great custom features and excellent design for superior flight. Watch the intro video for details...

• REDWING EXCLUSIVE!
• Developed using over 4 prototypes!
• Genuine Ultracote
• Redesigned Wing (not the same as the "other" off brands
• Built to fly 3D maneuvers amazing, and STILL land like a baby

Videos on this plane:











Buy Replacement Parts
Product Manual




Specifications:

• Wing span: 76"
• Wing area: 1100 sq. in.!!
• All up flying weight: 10.5-12.6 lbs.
• Length: 70"
• Cowl:
  • Inside Width: 8.75" (222.25mm)
  • Inside Height: 9.25" (234.95mm)
• Engine: (Any 30-36cc engine) Recommended: DLE 30, DLE 35, PTE 36
• Radio: 6 channel recommended (4ch possible)
• Recommended Spinner Size: 3"
• Recommended CG: 5 1/8" from the LE at the root
• Recommended Prop Size:
  • 18x8/10, 20x10 for sport
  • 18x619x6/8, 20x6/8 for 3d
• Recommended Throws: adjust to liking as you fly
  • Low Rates Settings | High Rate Settings
  • Rudder: 30 degrees, 20% expo | 50 degrees, 35% expo
  • Ailerons: 25 degrees, 25% expo | 40 degrees, 40% expo
  • Elevator: 20 degrees, 20% expo | 45 degrees, 40% expo

• OraCover (same as ultracote) Color #'s
  • May Green, 21-043
  • Ferrari Red, 21-023
  • Cub Yellow, 21-030
  • Silver, 21-091
  • Black, 21-071
  
  
  
   

  Features:
  

  • Removable stab
  • Ringed cowl
  • Adjustable push rods
  • Canister ready
  • Carbon fiber landing gear and accessories
  • Painted carbon fiber matching spinner (Optional)
  • Fast fly and easy build features, such as : Pre-drilled hinges, pre-plumbed fuel tank, pre-installed rudder cable,
  • Ultracote brand covering (Oracover is the same thing)
  • Fiberglass control horns (DOUBLE truss style, not single)
  
  
  

   

  We DO ship our planes internationally!

  Approximate International Shipping Costs (USD) for 30cc Planes:
  East Asia	$50
  West Asia	$135
  Europe	$95
  South America	$125

  Please contact us with your location for more specific cost.

   

  
  Click image to buy graphics sets
  
  
  

F4U Corsair Micro RTF Airplane w/PASS

T-28 Trojan Micro RTF Airplane w/PASS