Description:

Needing a sweet looking ventilation set up on your cowl so that your engine can purr with ease? Don't worry - we got this. Check out this lightweight, aluminum cooling vent! Not only will it look sleek on any plane - but it also offers twice as much cooling as those make-shift modifications to your cowl.

Stop spending all that time cutting up your cowl when you could just install these bad boys and have an even greater ventilation system! Why hassle over keeping your engine cool with your tedious, unnecessary alterations when these vents do that for you with ease?

Do yourself and your cowl a favor and pick up a few of these vents. Your bird will thank you.

2,7/8” x 2,1/2” (01)


More sizes mean better variety of use! Try it out on any sized plane!

*SOLD INDIVIDUALLY*

Miracle 3 Way T Joint with Fuel Filter

Miracle long fuel filling nozzle with fuel filter.
Available in Red, Gold, and Blue.
Please make a note of your color choice.

Miracle Fuel Dot Stopper/Fuel Filler Nozzle for RC Fuel Line Systems

Material: Aluminum with Rubber O-Ring

Dimensions: See Picture (2 per pack)

Specify color.

This item is a must have if you are running a smoke system. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes. Mounting dual tanks has always been tough because most aircraft have lightning holes right where you need to place the velcro straps. With this tray you mount it to the aircraft tank floor with wood screws. Then you can easily mount the tanks with just one velcro strap on the back of the tanks.

This item is a must have if you are running a smoke system. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes. Mounting dual tanks has always been tough because most aircraft have lightning holes right where you need to place the velcro straps. With this tray you mount it to the aircraft tank floor with wood screws. Then you can easily mount the tanks with just one velcro strap on the back of the tanks.

Makes mounting a single fuel tank or smoke tank much easier and stronger than with velcro straps alone. This tray design captures the neck of the tank for an exceptionally strong mounting solution. Works really well in warbirds and narrow fuselages where the installation is difficult to access. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes.

Makes mounting a single fuel tank or smoke tank much easier and stronger than with velcro straps alone. This tray design captures the neck of the tank for an exceptionally strong mounting solution. Works really well in warbirds and narrow fuselages where the installation is difficult to access. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes.

Makes mounting a single fuel tank or smoke tank much easier and stronger than with velcro straps alone. This tray design captures the neck of the tank for an exceptionally strong mounting solution. Works really well in warbirds and narrow fuselages where the installation is difficult to access. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes.

Single & Dual Sensor Tester Universal Sensor Timing Device Ignition Hall Sensor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

GT Power Servo Consistency Master.

With this cool device you can test up to 3 servos at a time for consistency and precision. With the GT Power servo tester you can see how servos react in three different testing modes. Manual, Neutral, and Automatic.

---

Manual Mode:: Turn the knob at different speeds however you want to check reaction time.

Neutral Mode:: Make the servo go back to the neutral position.

Automatic Mode:: "window wiper mode"- make the servo swing back and fourth at max angle.

---

Specs:

• Connect 1-3 servos simultaneously
• Test in 3 different modes
• Easy to read labels
• LED lights

RCEXL CDI Ingition Tester, Rcexl CDI Electronic Signal Generator Ignition box Test

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

GT Power Servo Consistency Master.

With this cool device you can test up to 3 servos at a time for consistency and precision. With the GT Power servo tester you can see how servos react in three different testing modes. Manual, Neutral, and Automatic.

---

Manual Mode:: Turn the knob at different speeds however you want to check reaction time.

Neutral Mode:: Make the servo go back to the neutral position.

Automatic Mode:: "window wiper mode"- make the servo swing back and fourth at max angle.

---

Specs:

• Connect 1-3 servos simultaneously
• Test in 3 different modes
• Easy to read labels
• LED lights

Spark plug for DLE Engines.
 

Description:
The Optical Kill Switch for gas rc planes, allows you to safely and remotely kill your electronic ignition. It is Fiber Optically Coupled to isolate your ignition system from your radio system so there is NO interference



Features:

• Includes a remote mountable bright LED to indicate when the ignition is armed.
• Fiber Optic coupled input/output.
• Li-Po/Li-lon/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 16 amp MOS-FET(IRF7456) output.
• Low to 3Volt 3amp output.
• Low Voltage Drop-Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires,universal connectors.
• Small and light weight –only 0.3 OZ!(8g)
• Reverse Bettery input protection.
• Shut down the transmitter power or receiver to cut off automatically when kill engine




 
•