Redwing RC Rectangle Wingbags
| Announcing New Rectangle Wing Bags from Redwing RC!!! RWRC wingbags are made with the finest materials to protect your precious investment. There are 2 openings, one slot for each wing, a wing tube slot, that velcros shut, and comfortable carrying straps. We also took customer recommendations to add a small handle so bags can now be hung on hooks. RWRC bags now come with a stylish Redwing RC zipper pull to prevent your wings from falling out when carrying. The outside is made of high quality heavy duty 1680 Denier abrasion resistant durable fabric which will protect your wings from sun damage/fading and are weather resistant. There is thick foam padding to protect the wings from the outside and each wing inside, as well as a Llightweight Oxford fabric added to the inside for a soft feel that is both durable and naturally resistant to wrinkles and comes with a PU coating for added protection against moisture! Another improvement is an additional pocket added to the outer pocket to provide more options for securing and holding parts or stabs. Other bags that come close to this quality are over $200 but RWRC kept all of our bags affordable (under $170) and a great value! Get them while you can. They always go fast when in stock!!
Approximate Dimensions: Medium: 55 x 20 inches Large: 86 x 26 inches PLEASE confirm size needed before ordering! |
RWRC Rectangle Wing Bags
Redwing RC Wingbags
Redwing RC Wingbags
Redwing RC Wingbags
RCExl Ignition Test Kit (Single and Dual Hall Sensor Tester V3.0)
| Hall Sensor Tester, Rcexl Gas Engine CDI Ignition Tester This is a timing and testing kit for RC gas engines.
This kit will allow you to check the working condition of your ignition without needing to restart the engine.
Analog engine speeds between 400 RPM ~ 20000 RPM can be used to check for interferences and radio range check. An LED will light up when everything is working properly. |
RCEXL-IG-T
$10.99
Standoff (17-20mm) 50-70CC (Anodized Gas Engine 25mm Stand Off Mounting Kit w/5mm Nuts & Bolts- 4pcs)
| Standoff (17-20mm) 50-70CC (Anodized Gas Engine 25mm Stand Off Mounting Kit w/5mm Nuts & Bolts- 4pcs) High Quality 1" Aluminum servo arm from Spot-On RC Spot On Servo Arms are made of high quality 7075-T6 aluminum, one of the highest strength alloys available for this purpose. They feature an ultra secure double lock design, keeping your servo arm secure and eliminating any slop between the main servo gear and the arm. Spot On Servo Arms are also sand blasted and anodized for a beautiful appearance. Spot on offers their servo arms in many sizes, threads and gear output compatibility. Spot On arms are offered in: Available colors are Black or Silver Spot On RC Servo Arms are measured from the center hole of the servo to the outermost hole (for example, a 1” arm is exactly 1” from hole center to hole center). However the larger sizes offer the option of one or two more additional inner holes so you can use them for future projects or fine tune your ratios. Redwing RC only offers the V2, upgraded version, with stronger aluminum and finer design. No matter which Spot On RC Servo Arms you choose you will be sure to experience problem free set up and operation with these high quality servo arms.
|
KAG0225
$21.99
5 METERS (15 FEET) OF 1/4 in (6mm) SPIRAL WRAP (Black and Clear)
5 METERS (15 FEET) OF 1/4 BLACK SPIRAL WRAP
High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
|
EX-Spiral Wrap
$6.95
