Phoenix 2400 (2.4M) Professional Grade Glider (PNP)
Phoenix 2400 (2.4M) Professional Grade Glider (PNP)The Phoenix 2400 is the largest glider of the Phoenix models. It comes with a near-indestructible ABS plastic fuselage and strong EPO foam wings and tail section. The Phoenix is made to last a lifetime with its smooth, rigid, fuselage yet remains light enough for the glider to perform with ease. There is a camera tray included that can be mounted instead of the canopy and once you install your camera, you’ll be able either enjoy FPV flying or just take footage of your flights. Assembling the glider is quite easy as the tail is screwed into place. To help with traveling as well as building the wing halves clip into place and have a wing spar for added strength. The main wing is 2400mm long and includes ailerons and flaps for better plane control. The fuselage has a built-in, single wheel for easier landings on rougher landing strips. The speed controller, brushless outrunner motor and 9g servos are all pre-installed. It should only take about 20 minutes to complete the rest of the build including adding your own receiver and battery. This Phoenix will provide hours of enjoyment sailing through the sky. Nothing like the whoosh of a low-level pass before powering to the heavens and going beyond the limits. Features: Specs:
Required for PNP version:
Product Manual: English $20 Flat Shipping US only--contact us at [email protected] to calculate international shipping cost |
Standoff (25mm) 100-120CC (Anodized Gas Engine 25mm Stand Off Mounting Kit w/6mm Nuts & Bolts- 4pcs)
| Standoff (25mm) 100-120CC (Anodized Gas Engine 25m Stand Off Mounting Kit w/6mm Nuts & Bolts- 4pcs) High Quality 1" Aluminum servo arm from Spot-On RC Spot On Servo Arms are made of high quality 7075-T6 aluminum, one of the highest strength alloys available for this purpose. They feature an ultra secure double lock design, keeping your servo arm secure and eliminating any slop between the main servo gear and the arm. Spot On Servo Arms are also sand blasted and anodized for a beautiful appearance. Spot on offers their servo arms in many sizes, threads and gear output compatibility. Spot On arms are offered in: Available colors are Black or Silver Spot On RC Servo Arms are measured from the center hole of the servo to the outermost hole (for example, a 1” arm is exactly 1” from hole center to hole center). However the larger sizes offer the option of one or two more additional inner holes so you can use them for future projects or fine tune your ratios. Redwing RC only offers the V2, upgraded version, with stronger aluminum and finer design. No matter which Spot On RC Servo Arms you choose you will be sure to experience problem free set up and operation with these high quality servo arms.
|
KAG0228
$24.99
Drill Jig Small (DLE 30/35RA/40/55/55RA/60/61/65, DA 50-55)
| Drill Jig Small (DLE 30/35RA/40/55/55RA/60/61/65, DA 50-55) |
Kosta-Small Drill Jig1
$21.99
