Phoenix 2400 (2.4M) Professional Grade Glider (PNP)

Contact UsCustomer Reviews

Phoenix 2400 (2.4M) Professional Grade Glider (PNP)

Our Price:

$229.99


Radio Combo
Charger Combo
Quantity (1)

Availability 1 in stock
Weight 5.00 lbs
SKU Phoenix-2400-759-3

Phoenix 2400 (2.4M) Professional Grade Glider (PNP) 

The Phoenix 2400 is the largest glider of the Phoenix models. It comes with a near-indestructible ABS plastic fuselage and strong EPO foam wings and tail section. The Phoenix is made to last a lifetime with its smooth, rigid, fuselage yet remains light enough for the glider to perform with ease. There is a camera tray included that can be mounted instead of the canopy and once you install your camera, you’ll be able either enjoy FPV flying or just take footage of your flights.

Assembling the glider is quite easy as the tail is screwed into place. To help with traveling as well as building the wing halves clip into place and have a wing spar for added strength. The main wing is 2400mm long and includes ailerons and flaps for better plane control. The fuselage has a built-in, single wheel for easier landings on rougher landing strips.

The speed controller, brushless outrunner motor and 9g servos are all pre-installed. It should only take about 20 minutes to complete the rest of the build including adding your own receiver and battery.

This Phoenix will provide hours of enjoyment sailing through the sky. Nothing like the whoosh of a low-level pass before powering to the heavens and going beyond the limits.

Features:
• ABS plastic fuselage
• EPO foam wings with flaps
• Camera mounting platform
• Click and plug wing assembly
• Quick build time
• Preinstalled motor, ESC and servos

Specs:

  • Wingspan: 2400mm (94.5")
  • Length: 1283mm
  • Flying weight: 1160g
  • Motor: 4023-1050KV brushless outrunner
  • ESC: 40A brushless
  • Propeller: 10x6 Folding
  • Servos: 9g x 6 (See all RedwingRC Servos)
  • CoG: 77+/-5mm from the leading edge

Required for PNP version:

  • 2.4GHz 6Ch Radio TX/RX system, see combo savings
  • 2200mAh~5000mAh 3S Lipo Battery--(see all RedwingRC batteries/chargers) see combo savings
  • Battery Charger: see combo savings

Product Manual: English

$20 Flat Shipping US only--contact us at [email protected] to calculate international shipping cost

: *
: *
: *
 

DA-120cc Gas Engine

Description:

The ultimate combination of performance and reliability!
Backed by the best service and support in the industry.


Specifications:

*More Coming Soon*

 

  • Displacement: 121cc (7.4 cu in)
  • Bore and Stroke:
  • Weight: 4.95 lb (2.25 kilos)
  • Output:
  • RPM Range: 1000-6800
  • RPM Max:
  • Requires: unleaded gasoline, oil, ignition battery & propeller
  • Includes: electronic ignition, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension & mounting template
  • Suggested Propellers: 28x12, 29x10
  • Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
  • Fuel Consumption:


Features:

  • DA engines are designed using the latest tools and techniques, including 3d CAD and stereo lithography
  • INCLUDES: Engine, spark plug, standoffs, ignition, instruction manual
  • DA auto advance electronic igniton
  • Walbro Carb
  • Exclusive DA designed cylinders, pistons, and crank shaft
  • CNC milled, 7075 aluminum alloy crankcase
  • low vibration
  • Most torque in its class
  • Long rod to stroke ratio
  • Aerobatic power curve
  • Three crank bearings, long spacing between front bearings
  • Four petal reed ralve, bottom induction



RedwingRC Pre-Run
DLE 35ra DLE55

 

*Takes 4-5 days to ship once order is placed*

DA-120

$1249.00

NEW

Extreme RRS--16 CH High Power Expander

Extreme RRS--16 CH High Power Expander

Welcome to the world’s first Automatic Intelligent Servo Matching System (ISMS)

Intellimatch is the result of 2 years of research and development, is designed to take the worry out of servo matching and gives you the maximum power, smoothest response and increased life from your servos.

If you have built giant scale models before with multi servo control surfaces then I am sure you will be familiar with the process of manually matching the servos. You generally match servos on 2 end points and maybe a center point. That’s a total of only 3 matching points. There is no way 3 points will accurately match your servos. Also, you have to adjust each servo until minimal buzz is heard or you might use an ammeter to minimize current draw. Throw that idea away...

With the Booma RC Intellimatch you say goodbye to traditional methods of servo matching. The Intellimatch system automatically matches servos on 100 points through the servo sweep range. That is 100 points not just the traditional 2 or 3. Intellimatch further adds smoother operation by reading the closest 2 points from the servos current position and then interpolates between the 2 selected points to a resolution of 8192 steps. 8192 step resolution is the highest resolution available today.

The IM14 Intellimatch unit is designed to match 1 set of up to 4 servos. An example IM14 usage might be up to 4 rudder or ailerons servos

Read on for the full list of features




Model Example 1 - 100cc Scale Aero Model:

-2 Aileron Servos per aileron

-1 Elevator Servo per elevator

-2 Rudder servos

Suggested Power Bus Intellimatch Accessories

-2 x IM22 = 1 x IM22 for Ailerons and 1 x IM22 for Elevators

Model Example 2 - 150cc Scale Aero Model:

-3 Aileron Servos per aileron

-2 Elevator Servo per elevator

-3 Rudder servos

Suggested Power Bus Intellimatch Accessories:

-1 x IM22 = 1 x IM22 for Elevators

-2 x IM14 = for Ailerons

-1 x IM14 = for Rudder

Model Example 3 - Large Jet:

-2 Aileron Servos per aileron

-2 Flap Servos

-1 Elevator Servo per elevator

-2 Rudder servos

Suggested Power Bus Intellimatch Accessories:

-1 x IM22 = for right side Ailerons and Flaps

-1 x IM22 = for left side Ailerons and Flaps

-1 x IM22 = for Rudder

 

 

Specs:

 

 

  • 32 bit Processor for the highest speed and resolution in the industry
  • Automatic matching of up to 4 servos on a single channel
  • 100 matched point across the servo sweep range
  • 82 step real time interpolation between the 100 matched points
  • PWM resolution of up to 8200 steps
  • Dual LED indication for programming feedback
  • Recommended battery chemistry - Life (2 cells), LiPo (2 cells), Lion (2 cells), NiCd(5cells),Nimh(5 cells)
  • Maximum input voltage 10 volts
  • Minimum input voltage 5 volts
  • Compatible with all receivers and Power Distribution systems
  • Works with Advanced Radio AR1232 and AR824. Also compatible with all other receiver and Power Distribution systems
  • Dual fail safe arming with the supplied arming plug
  • On board Flash storage - 100 year data retention
  • Weight is only 12 grams
  • Dimensions 49mm x 23mm (3.5 x 2.5 inches)

BRC-876

$279.99

Raptor H650 Sea Land Air 490mm Wingspan 2.4GHz 6CH Smart Balance Gyro EPP RTF

Raptor H650 Sea Land Air 490mm Wingspan 2.4GHz 6CH Smart Balance EPP RC

Do you feel the need for speed? Check out the Dynam Meteor V2. This is a High Speed 70mm EDF Sport Jet that features retracts! How cool is that?! The Meteor V2 is constructed with EPO crash resilient foam and it is pre-painted saving you time. If that's not enough, all servos, 70mm Fan, and the 60Amp ESC are factory pre-installed. This airplane is designed for High-Speed flying which is made possible with a powerful Brushless Electric Ducted-Fan. The Fan Unit is is very well constructed for High-Performance flying. In case you were wondering, this model is absolutely one of the fastest EPO EDF jet on the market.

 

Key Features:

  • Powerful 70mm EDF fan unit and motor
  • 60A Brushless ESC with Switch-Mode BEC
  • retractable landing gear
  • Easy to build.
  • SUPER FAST

Specifications:

Wingspan: 35.8 inch (910mm)
Overall Length: 43.3 (1100mm)
Flying Weight: 38.8oz (1100g) w/Battery
Fan Unit: 70mm fan unit (installed with motor)
Motor Size: Powerful 400 high speed outrunner brushless motors (installed)
Radio / Transmitter: 5 Channel Required - (Not Included)
Receiver: 5+ Channel (Not Included)
Servos: 4 servos installed ( 4 x 9g )
Speed Control : 1 x Dectrum 60A Brushless with Switch-Mode BEC (installed)
Battery: 14.8V 2600 mah 25C LiPo (Not Included)
Charger: NOT INCLUDED 2S - 4S lipo charger
Flight Time:

Average (6-10 mins)

 

 

 

 

 


 

H-650-Raptor

$119.00