PhoenixS 4 Channel 1600mm (63") Sport Glider (PNP) with ABS Plastic Fuse

The Phoenix S is a quick and easy to assemble 4ch sport electric powered glider that's perfect for general and aerobatic flying. The EPO wings are fitted with carbon spars for strength and each of the large ailerons is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using the Volantex fast connect clip system, after flying, simply squeeze the clips to release the wings.

The lightweight, streamlined fuselage is blow-molded from a tough, rugged, and flexible plastic with plywood formers that will take a lot of punishment, it will bend and flex before breaking. The EPO horizontal stabilizer and elevator are also reinforced with carbon to improve the strength and stop flutter when flying at high speeds. No glue is required when assembling, the vertical and horizontal stabilizer are simply screwed to the rear of the fuselage.

This is the PNF version which is supplied with a pre-installed 2212-1400KV brushless motor, pre-installed 30A BEC brushless ESC, and 4 pre-installed 9g servos. Also supplied is a complete hardware pack which includes a 12x6 folding propeller, propeller adaptor with spinner, horns, push-rods, and screws. All the control surfaces are pre-hinged using strong plastic hinges to reinforce the foam hinge. The Phoenix S is a strong, rugged, electric-powered glider that is stable yet able to perform nice, smooth aerobatics and is perfect for general sports flying.

Features:

• A perfect sport and aerobatic electric glider
• Tough, rugged, blow-molded fuselage
• Carbon reinforcement for strength
• Wings and tail are made from tough EPO
• Fast connect/disconnect clips for holding the wings to the fuselage
• Strong plastic hinges to reinforce the foam hinge
• Plug and fly, complete with pre-installed motor, ESC, and servos

Specs:

• Wingspan: 63" (1600mm)
• Length: 45.7" (1160mm)
• Flying Weight: 1.8 lbs (798g)
• Motor: BL2212/1400KV brushless motor with folding prop
• ESC: Easy-Plug 30A brushless ESC
• Servo: 9g x 4 (See all RedwingRC Servos)

PNP version Requires:
4 Channel or more Transmitter and Receiver 
7.4V 2S-1500mAh XT60 Li-Po Battery (see all RedwingRC batteries/chargers) 
Battery Charger:see combo pricing

Product Manual: English

$20 Flat Shipping US only--contact us at [email protected] to calculate international shipping cost