RCGF 35CC SE Stinger Gas Engine

Contact UsCustomer Reviews

RCGF 35CC SE Stinger Gas Engine

Our Price:

$309.00


Quantity (2)

Availability 2 in stock
Weight 5.00 lbs
SKU RCGF-35cc-SE
Manufacturer RCGF Stinger Engines

The New RCGF 35CC SE Stinger Gas Engine Provides Convenience and power for quarter scale!

With the New RCGF 35cc SE Stinger engine, you get the economy of a gasoline engine in the size of a glow engine. Electronic ignition provides the spark for fast starting. 
Timing automatically adjusts for peak power throughout the rpm range.
And a made-for-flight design ensures the best power-to-weight ratio for performance. 




RCGF 35cc SE-Stinger Parameters:

  • Type : 2 cycle piston valve type gasoline engine for airplane

  • Piston displacement Cylinder (cc) : 35cc (2.13 cu in)

  • Bore x Stroke (mm): 1.53 in(39mm) x 1.18 in (30mm)

  • Carburetor : Walbro

  • Ignition : DC-CDI (Computer Controlled auto advance, electronic ignition system)

  • Power supply: 6-14V 

  • Maximum Output :4.1HP@9000

  • Requires: Gasoline, 2-cycle oil, ignition battery & propeller

  • speed rang : 1500-9000rpm

  • Gasoline-Version : Pre-mixed Fuel, 25-40 (Gasoline):1 , Recommend:30:1

  • (90% high otcane unleaded gasoline, Import gas into carbon fiber installations valves)

  • Lubrication Oil : 2 cycle engine oil

  • Propeller : 19X8 7900rpm (Standard Two leafs prop)

  • Suggested Propellers: 19x8 & 20x8,20X10

  • Suggested Break-in Prop: 19x8

  • Sparking plug: NGK CM6 Type

  • Cooling System : Air Cooled

  • RCGF engine package Includes: Rcexl electronic CDI ignition, muffler, spark plug, gaskets, bolts, stand off,throttle arm extension & manual.


Weight :

  • Engine: 2.03 lb (923 g)

  • Muffler: 3.4 oz (97 g)

  • Ignition Module: 4.4 oz (125 g)

  • Total: Weight: 2.52 lb (1145 g)


Technical Data:

  • Ignition Battery: 6-8.4 NiCd or NiMH, 6.6V LiFe or 2S LiPo pack

  • Gasoline/Oil Mix: 30:1

  • Replacement Spark Plug: NGK CM6 or equivalent

  • Idle Speed: 1800 rpm/min

  • Static Thrust:

  • 19.9 lb (9 kg) @ 328 ft (100 m) altitude

  • 19.0 lb (8.6kg) @ 5,900 ft (1800 m) altitude

$20 flat rate shipping for Domestic US only ($65 economy to Canada) send us an email at [email protected] to calculate shipping cost.

 

: *
: *
: *
 

HiTec 5645mg

Description:
The HS-5645MG is one of the best choices you can make for a 50cc sized plane for the cost. They will also work well in 30cc planes. It is fully programmable using Hi Tec's programmer. The combination of torque, speed, price and extreme holding power make it a favorite among pilots. Special alloy gears called “Alumite” offer tremendous strength yet are lightweight as well.


Specifications:

  • Torque:
    • 143 oz/in at 4.8V (10.3 kg/cm)
    • 168 oz/in at 6V (12.1 kg/cm)
       
  • Speed:
    • .23 sec at 4.8V
    • .18 sec at 6V
       
  • Voltage: 4.8V - 6V
  • Weight: 2.11oz (59.82g)
  • Size: 40.6 x 19.8 x 37.8mm (1.59 x 0.77 x 1.48in)
     
  • Motor Type: 3 Pole Ferrite
  • Bearing Type: Dual Ball Bearing
  • Gear Type: 3 Metal Gears and 1 Resin Metal Gear
  • Connector Wire Length: 11.81" (300mm)
  • Control System: +Pulse Width Control 1500usec Neutral
  • Required Pulse: 3-5 Volt Peak to Peak Square Wave
  • Operating Temperature Range: -20 to +60 Degree C
  • Operating Angle: 45 Deg. one side pulse traveling 400usec
  • 360 Modifiable: Yes
  • Direction: Clockwise/Pulse Traveling 1500 to 1900usec
  • Dead Band Width: 8usec
  • Potentiometer Drive: Indirect Drive
  • Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
  • Current Drain (6.0V): 9.1mA/idle and 500mA no load operating

HS-5645mg

$45.99

MULTIPLEX (MPX) Dual Servo Harness 6" Male 6" Female (2 Channels 1 Plug) 20 AWG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:
Male Deans to Male XT60 Connector

With this Deans to XT connector you can convert a battery with T-Plug to XT-60 on ESC / charger
The connector has many applications and can be used for charger adapter.

Features:

  • Male Deans T style plug to Male XT60
  • Durable design
  • Heatshrink seal

MPX-Dual-6/6

$14.99

Miracle CNC Heavy Duty Half Servo Arm 1.25-1.5" and 1.75-2" (Futaba/Hitec/JR)

Miracle CNC Heavy Duty Half Servo Arm 1.25-1.5" and 1.75-2" (Futaba/Hitec/JR) 

MRC-F-024-Servo-Arm

$12.99