BLS-125AWB Water Proof, ULTRA MEGA TORQUE, Brushless+Servo Arm (New generation Large Scale Servo with Single wire to connect directly to RX) 126.5kg/1757.1oz .15sec @8.4V

Contact UsCustomer Reviews

BLS-125AWB Water Proof, ULTRA MEGA TORQUE, Brushless+Servo Arm (New generation Large Scale Servo with Single wire to connect directly to RX) 126.5kg/1757.1oz .15sec @8.4V

Our Price:

$199.99


Quantity (10)

Availability 10 in stock
Weight 0.80 lbs
SKU BBR-BLS-125AWB-single wire
Manufacturer Blue Bird

Special Order! This is a special order item and is subject to manufacturer availability. Please allow a minimum of up to 2 weeks for processing before items are shipped. No cancelations or returns are permitted.

BLS-125AWB Water Proof, ULTRA MEGA TORQUE, Brushless+Servo Arm (New generation Large Scale Servo with Single wire to connect directly to RX) 126.5kg/1757.1oz .15sec @8.4V--Blue Bird's most powerful 1/4-1/5 scale Monster Truck/Crawler/Large Boat servo at over 1750oz!!

Water Proof IP67 (Ingress Protection Rating, 6=Dust Tight, 7=Immersion up to 1Mfor 30 min)

Application / Suitable
1/4、1/5th Scale Vehicles, such as Buggy ( Off-Road ), GT ( On-road ), Monster Truck, Rock Crawler & Large Boats, etc.

 

Specifications
Stall Torque At 6.6V 99.5 kg-cm / 1382.1 oz-in
Stall Torque At 7.4V 111.4 kg-cm / 1547.3 oz-in
Stall Torque At 8.4V 126.5 kg-cm / 1757.1 oz-in
No-load Speed At 6.0V 0.19 sec / 60°
No-load Speed At 7.4V 0.17 sec / 60°
No-load Speed At 8.4V 0.15 sec / 60°
Stall Current At 6.0V 11.7 Amp
Stall Current At 7.4V 13.5 Amp
Stall Current At 8.4V 15.4 Amp

 

Protection Mechanism
Soft Start Protection Soft start back to a neutral position.
Over Voltage Protection Over 9.0V drive the protection mode, and 8.7V return to normal mode.
Low Voltage Protection Lower than 5.8V, drive the protection mode, and 6.0V return to normal mode.
Locked Rotor Protection Stall in 3 sec, output torque goes down.
Temperature Protection Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode.
Lose Control Protection When losing the transmitter signal, that servo will immediately be back to the neutral position and locked.

 

Power Supply
Operating Voltage Range 6.0V ~ 8.7V ( 2S Li-Fe / 2S Li-Poly HV )
Operating Temperature Range -20°C ~ +60°C ( -4°F ~ +140°F )

 

Control Specification
Control System Higher-order Algorithm of【STMicroelectronics】32-bit MCU
AD 12-bit Resolution ( 4096 Steps )
Frequency:Up to 400Hz & 1500us or 1520us
Frame Rate (Signal repeat rate) Under 1ms【Auto-adaptive with Futaba_UR/SR & Sanwa_SXR & KO_HCS Mode】
Dead Band Width 0.002ms ( Default:2us)

 

Mechanical Specifications
Ball Bearing Dual, Stronger Ball Bearings with 1 piece of oil seal.【NMB from Japan】
Gear Stainless Steel Output Gear With All Steel Gears
Motor High-Efficiency Brushless Motor
Outside Case Full Aluminum Alloy Case
Horn / Gear Spline 15 Teeth ( Universal Type )
Connected Cable Length 300 mm (11.81 in)  TYU : Black w/ Gray 
Connected Housing Universal Connector [ Black ]
Ingress Protection Rating IP67 means: 6=Dust Tight / 7=Immersion up to 1 Meter depth of 30 minutes

 

Physical Specifications
Dimension (mm) 65.8 x 30 x 56.5 mm / 2.59 x 1.18 x 2.22 in
Weight (gram) 229.0 ± 1 grams / 8.08 oz W/O Cable
Product Picture / Dimension Sketch  


Includes Servo and Aluminum Servo Arm

 

: *
: *
: *
 

30cc Piper Cub - Yellow

The J3 92" Piper Cub is an amazing aircraft for smooth flights and a very scale appearance. The 30cc Piper Cub form RedwingRC has a beautiful color scheme that helps with orientation and leaves you plenty of room for custom graphics. The 30cc Piper Cub is built with high quality balsawood and provides a lightweight airframe that is ridged and strong in all the right places.

The 30cc Piper Cub was made to be an outstanding aircraft. The large rudder, large control surfaces, and aerodynamic nose makes this a very responsive plane in the air.

As with all RedwingRC planes, the 30cc Piper Cub has quality hardware and is a fun build.

Enjoy the sky with the 30cc J3 Piper Cub available at RedwingRC!!!


Flight Video


 


Specifications:

  • Wing span: 92" / 2337
  • Wing area: 78.58sq.dm
  • All up flying weight:
  • Length: 57.6" / 1462mm
  • Cowl:
    • Inside Width:
    • Inside Height:
  • Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
  • Recommended Spinner Size: 3"
  • Recommended CG:
  • Recommended Prop Size:
    •  
  • Recommended Throws: adjust to liking as you fly
    • Low Rates Settings | High Rate Settings
    • Rudder:|
    • Ailerons: |
    • Elevator: |

 

 

Features:
30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes

  • Removable stab
  • Ringed cowl
  • Adjustable push rods
  • Canister ready
  • Fiberglass stab mounts
  • Painted matching spinner (optional)
  • Fast fly and easy build features, such as : pre-drilled hinges, pre-plumbed fuel tank, pre-installed rudder cable,



We DO ship our planes internationally!

Approximate International Shipping Costs (USD) for 30cc Planes:
East Asia
$50
West Asia
$135
Europe
$95
South America
$125

Please contact us with your location for more specific cost.

 

DLE 35ra DLE55



Build & Ship Plane

30-J3Cub-Y

$399.00

Metal Clevis With Hollow Shaft Φ3+M3×L33mm (10 pcs)

Metal Clevis With Hollow Shaft Φ3+M3×L33mm (10 pcs) 

VP-ACC03-Clevis-Rod

$9.99

D200 15A/200W Discharger (use with UPTUP6PLUS, UPTUP7 or UPTUP8)

D200 15A/200W Discharger (use with UPTUP6PLUS, UPTUP7 or UPTUP8)

With this Imax B6AC multi charger, you can charge using a battery at the feild or your ac plug at home! You can charge up to 6 cell batteries. It's capable of charging most types of batteries, LIFE LIPO LION (A123) NICAD NIMH ETC

If you have a splitter you can charge 2/3 cell batteries at once (using an adapter)



Specifications:

  • Input Voltage: DC 11-18V / AC in: 100V-240V 50-60Hz
  • Circuit power: Max Charge: 50W / Max Discharge: 5W
  • Charge Current Range: 0.1-5.0A
  • Discharge current range: 0.1-1.0A
  • Ni-MH/NiCd cells: 1-15
  • Li-ion/Poly cells: 1-6
  • Pb battery voltage: 2V-20V
  • Weight: 531g
  • Dimensions: 134x142x36mm

 

 

 


 

 

 

Features:

  • iMax B6AC 1-6 Cells Digital Multifunctional Balance Charger
  • 100-240v AC input or 11-18V DC input
  • Microprocessor controlled
  • Delta-peak sensitivity
  • Individual cell balancing
  • Li-ion, LiPo and LiFe capable
  • Ni-Cd and NiMH capable
  • Large range of charge currents
  • Store function, allows safe storage current
  • Time limit function
  • Input voltage monitoring. (Protects car batteries at the field)
  • Data storage (Store up to 5 packs in memory)
  • Battery break in and cycling.

 

 


 

 

Package Contents:

  • iMax B6AC 1-6 Cells Digital Multifunctional Balance Charger
  • 4mm Banana Plug to Male Deans style connector
  • A female Deans style connector to a pair of Alligator clips
  • A female Deans style connector to a female Futaba style servo connector
  • A female Deans style connector female JST style connector
  • A female Deans style connector to Glow Plug type connector
  • Power Cord
  • User Manual

 

 

 

 

 

UPTUPD200

$89.99