BLS-A932 SLIM WING, HV MINI, DIGITAL, HIGH TORQUE/SPEED, METAL GEAR, BRUSHLESS

Contact UsCustomer Reviews
  0  
  4. BLS-A932 SLIM WING, HV MINI, DIGITAL, HIGH TORQUE/SPEED, METAL GEAR, BRUSHLESS
Tariff Information update
The Redwing RC Office will be operating with reduced staff until 24 Jun. Orders can still be accepted during this time but will take longer than usual to process/ship. If you need the item urgently (moved to top of the list), select Priority express and we will do our best to rush the order out to you as quickly as possible.
more offers

BLS-A932 SLIM WING, HV MINI, DIGITAL, HIGH TORQUE/SPEED, METAL GEAR, BRUSHLESS

Ask a question about this product
Printable version

Share

Options

Our Price:

$65.00
Quantity (30)

Details

Availability 30 in stock
Weight 0.51 lbs
SKU BBR-BLS-A932
Manufacturer Blue Bird

BLS-A932 SLIM WING, HV MINI, DIGITAL, HIGH TORQUE/SPEED, METAL GEAR, BRUSHLESS

Application
Perfect for 3D Airplane, Glider & 1/12th EP On-Road Car

 

Specifications
Torque At 6.0V 14.2 kg-cm / 197.2 oz-in
Torque At 7.4V 17.5 kg-cm / 243.1 oz-in
Torque At 8.4V 19.8 kg-cm / 275.0 oz-in
Speed At 6.0V 0.10 sec / 60°
Speed At 7.4V 0.08 sec / 60°
Speed At 8.4V 0.07 sec / 60°

 

Protection Mechanism
   
Locked Rotor Protection Stall in 5 sec, output torque goes down.
Temperature Protection Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode.

 

Power Supply
Operating Voltage Range 4.5V ~ 8.7V ( 2S Li-Fe & HV Li-Poly Compatible )

 

Control Specification
Control System 32-bits CPU Digital Calculator / AD 12-Bits Resolution ( 4096 Steps )
Frequency：Up to 333Hz & Neutral：1500us or 1520us
Dead Band Width 0.001ms ( 1us )

 

Mechanical Specifications
Ball Bearing Dual
Gear All Metal Gears
Motor High-Efficiency Brushless Motor
Horn / Gear Spline 25 Teeth

 

Physical Specifications
Dimension (mm) 35.5 x 15 x 29 mm / 1.4 x 0.59 x 1.14 in
Weight (gram) 35.5 ± 1 grams / 1.25 oz
Product Picture / Dimension Sketch ​

 


: *
: *
: *
 
HiTec 5645mg

HiTec 5645mg

Description:
The HS-5645MG is one of the best choices you can make for a 50cc sized plane for the cost. They will also work well in 30cc planes. It is fully programmable using Hi Tec's programmer. The combination of torque, speed, price and extreme holding power make it a favorite among pilots. Special alloy gears called “Alumite” offer tremendous strength yet are lightweight as well.


Specifications:

  • Torque:
    • 143 oz/in at 4.8V (10.3 kg/cm)
    • 168 oz/in at 6V (12.1 kg/cm)
       
  • Speed:
    • .23 sec at 4.8V
    • .18 sec at 6V
       
  • Voltage: 4.8V - 6V
  • Weight: 2.11oz (59.82g)
  • Size: 40.6 x 19.8 x 37.8mm (1.59 x 0.77 x 1.48in)
     
  • Motor Type: 3 Pole Ferrite
  • Bearing Type: Dual Ball Bearing
  • Gear Type: 3 Metal Gears and 1 Resin Metal Gear
  • Connector Wire Length: 11.81" (300mm)
  • Control System: +Pulse Width Control 1500usec Neutral
  • Required Pulse: 3-5 Volt Peak to Peak Square Wave
  • Operating Temperature Range: -20 to +60 Degree C
  • Operating Angle: 45 Deg. one side pulse traveling 400usec
  • 360 Modifiable: Yes
  • Direction: Clockwise/Pulse Traveling 1500 to 1900usec
  • Dead Band Width: 8usec
  • Potentiometer Drive: Indirect Drive
  • Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
  • Current Drain (6.0V): 9.1mA/idle and 500mA no load operating

HS-5645mg

$45.99

Quick Connect Ball Joint

Quick Connect Ball Joint
Quick connect ball joint for the throttle. Easy to connect throttle links!

Comes in Pairs!, smaller than our standard ball joints.

SD-519B50

$10.00

Replacement Wings for V2 50cc Extra 330 (Red, Silver Scheme)

Replacement Wings for V2 50cc Extra 330 (Red, Silver Scheme)

Replacement Wings for V2 50cc Extra 330 (Red, Silver Scheme) This is a set of 2 wings (left & Right) will need to be re-covered to match your scheme. Please contact us if you are in need of a single 50cc size wing.



Includes Silver Side Force Generators

50 Wing2

$90.00


Back to Top