25mW Fully Enclosed VTX + CMOS Sensor With Build-In Dual Stage Amplified Microphone

Contact UsCustomer Reviews

25mW Fully Enclosed VTX + CMOS Sensor With Build-In Dual Stage Amplified Microphone

Our Price:

$39.99


Quantity (4)

Availability 4 in stock
Weight 0.25 lbs
SKU LM-D0001

Highlight

- World smallest: Fully enclosed VTX +CMOS + OSD + Microphone (LMD0001 only) + 5.8GHz tranmission

- VTX with extremely high quality and sensitivity CMOS for ultimate realistics real-time video transmission. 712*562 pixels with 16V/Lux*sec.

- Build-in microphone (LMD0001 only) with dual stage amplifier for outstanding audio capture with adjustable sensitivity (require voiding warranty by taking apart for adjustment). You can now hear your plane's engine as you fly. 

- 25mW class video with extremely light weight antenna with very good matched design to minimize reflection and RF energy losses. Range is comparable to other branded 25mW VTX that uses the very heavy cloverleaf antenna.

- OSD (On Screen Display) that let you know the current settings with real text displayed. Knowing the manufacturer compatability and actual transmission frequency without guessing with the back LED display.

- Remote shut down. Save power for small plane during launches and activate VTX only when the plane is high up in the sky.

- Able to change manufactuer compatability and frequency with either pushbutton or servo signal (by toggling switch a few times on transmitter).
- 2 sets of cable: single cell LiPo opertional. For 4.8V to 7.2V 2nd set of cable is provided for direct connection to standard receiver header pins.
- Designed to best suited for hobby modification with standard connectors and antenna connectors
- Polycarbonate casing that can withstand very hard mechnical impact
- Choices of optional lens under accessories page

 

"After more than a year of R&D with many engineering challenges, we are able to do extreme miniaturization at an affordable price for the hobby market. A 0.05mm offset of imprecision during production stage will be catastrophic with very low yield rate. This is a project that we almost canceled. I am sure that this unit will set a new milestone for the RC industry of what a truly refined design and precision engineering are. If hobbyists are interested in supporting truly refined design at slightly higher cost, we will have a lot more exciting products coming in the following years." --Lemon Rx Engineering Team

 

Compatability chart

Manufacturer Compatability Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 Ch8
BOSCAM A 5865 5845 5825 5805 5785 5765 5745 5725
BOSCAM B 5733 5752 5771 5790 5809 5828 5847 5866
DJI 5705 5685 5665 5645 5885 5905 5925 5945
FatShark / IRC 5740 4760 5780 5800 5820 5840 5860 5880
FatShark Racing 5658 5695 5732 5769 5806 5843 5880 5917

 

FAQ
- To be announced

Specification

Type: Lemon Rx 25mW fully enclosed VTX + CMOS sensor with build-in dual stage amplified microphone 
Modulation: FM (see compatability chart)
Band: 5.8GHz
Dimension: 19 x 19 x 10mm
Weight: 4.1g
Voltage Range: 3.5V - 7.2V (LMD0001 microphone will not functional below 3.6V)

 

RCgroups discussion 

Please click the link below for RCG discussion:
https://www.rcgroups.com/forums/showthread.php?2940390-The-official-Lemon-4-1g-VTX-Camera-thread

Photos
OSD showing partial section of the displayed text (looped) as well as the inside view of the unit without taking it apart.

User Manual re-direct link 
- To be organized. Please see below for website version of user manual

1- Cable set

   - 2.54mm spacing wiring set is for voltage between 4.8 to 7.2V

   - 1 wiring set for use with 1S battery such as Horizon Hobby’s E-flite 1S battery

2 - Compatability chart

   - See above

3 - Turns off VTX remotely

   - A servo pulse of 1ms, or -100% (for Spektrum transmitter) will effectively turns off both RF transmission and CMOS camera

4 - Display current settings

   -  Repower the unit or push the button briefly to display current settings

5 - Change manufacturer compatibility

   5.1 - Method 1 - via push button

         - When OLED display is off, hold the button until it displays current settings.

         - Before the display turns off, press briefly to change the “manufacturer” for compatibility.

   5.2 - Method 2 - via receiver

         - Make sure the VTX is connected to a receiver with supplied wiring set while also powered by the receiver. (eg. Connect VTX to Rx’s AUX1).

         -  When OLED display is off, toggle 0% to 100% as fast as you can (at least 8 time within 1.5 seconds) will trigger OLED to show the manufacturer is changed.

6 - Change channel / frequency

   6.1 - Method 1 - via push button

         - When OLED display is off, press the button briefly to displays current settings.

         - Before the display turns off, press briefly to the channel / frequency.

   6.2 - Method 2 - via receiver

         - Make sure the VTX is connected to a receiver with supplied wiring set while also powered by the receiver. (eg. Connect VTX to Rx’s AUX1).

         - When OLED display is off, toggle 0% to -100% as fast as you can (at least 8 time within 1.5 seconds) will trigger OLED to show the channel / frequency is changed.
Note:

1) Horizon Hobby and Spektrum are the trademark of Horizon Hobby, Inc.
2) BOSCAM, DJI, FATSHARK are associated to its company owner. Please visit United States Patent and Trademark Office for more information.

: *
: *
: *
 

SALE

7 CH XFly-Model J65 V2 w/ 3-Axis Stabilization Gyro System Twin 70mm RC EDF Jet PNP

Pre-order! Estimated Arrival Mid March SAVE $30 on this Pre-Sale special offer!

  • This is an EXTREMELY popular product, so we STRONGLY recommend pre-ordering if you wish to receive a unit from the first shipment. They will sell out before they arrive!

Credit Card or other payment will be charged at the time of order.

 

$20 Flat Rate shipping lower 48 USA only. Contact us at [email protected] to calculate international shipping cost.

$30 Container Freight charge has been added to this item due to excessive Container prices!

RedwingRC Plug-and-Play aircraft!   

Check out this really interesting design in the Warbird series- The Messerschmitt BF-110. This is such a great plane and because its constructed with damage resistant EPO foam it is very durable and will last along time. The Messerschmitt BF-110: 2X the motors, 2X the fun!!!

This model come with Flaps, Retracts, 2 ESCs, 2 Motors, and all the required servos. (Flaps will require a servo reverser either external or on the Transmitter). The build on this one is very easy and straight forward. The only surprise is the minimal work needed to get this plane in the air.

The twin motors will provide more than enough power and a majority of the flight can be flown at 50% throttle.

** Please note: It is important to calibrate the throttle and check the settings for both motors since this is a twin.

Video:

 

Key Features:

  • 6 Servos - Flaps factory installed (requires a servo reverser to use the flap servos)
  • Factory installed retracts with spring loaded retract door
  • Dual powerful dectrum motors installed
  • Spring loaded retract doors

 

Specifications:

Wingspan: 59in (1500mm)
Overall Length: 44.17in (1122mm)
Flying Weight: 1900g
Motor Size: 2 x BM 3512-850kv
Propeller: 2 x (10 x 6 x 3)
Radio / Transmitter: NOT INCLUDED (requires 6ch radio for flaps and retracts- not included)
Receiver: +5 Channel (NOT INCLUDED)
Servos: 6 servos installed ( 6 x 9g)
Speed Control : 2 x Dectrum 40Amp Installed
Battery: 14.8V 2200 mah 25C (not included)
Charger: NOT INCLUDED
Flight Times:

Average 5-7 Minutes

Assembly Time:

45min - 60 mins

 

 

 


 

XF63684

$559.99

SALE

100cc Slick 540

RedwingRC 100cc Slick Prototype

Pre-order sale $250 off! Estimated Arrival Mid March, 2022

  • This is an EXTREMELY popular product and quantiities limited, so we STRONGLY recommend pre-ordering if you wish to receive a unit from the Mar shipment.

Credit Card or other payment will be charged at the time of order.


Own a piece of history! Not many pilots can say they own a RedwingRC Prototype, but now you can! Very limited quantities, in-fact, we are only selling two!

*Please note that this is a "Prototype" and will need some reinforcement. RC build enthusiasts- this is a great new project you'll love!

The 2015 & 2016 Redwing RC Extra 330 has been one of the most popular air frames to come to the RC market in years. This is the next step for the RedwingRC Extra 330... 100cc.

Redwing RC 100cc Extra Prototype!

See it action and deadstick landing: 

https://www.facebook.com/jeff.mitchell.9465/videos/10206789474172876/?t=1

 

Flight Video



Specifications:

  • Wing span: 2745mm/108"
  • Wing area: 143-65dzm
  • Empty Starting weight:9100-9600g
  • Length: 2550mm
  • Engine: 100CC-120cc
  • Radio: 9channels
  • Recommended Spinner Size:
  • Recommended CG:
  • Recommended Prop Size: 24x8 to 25x9
  • Recommended Throws:
    • Low Rates Settings | High Rate Settings
    • Rudder: |
    • Ailerons: |
    • Elevator: |
  • Removable stab
  • Ringed cowl
  • Adjustable push rods
  • Canister Tunnel built in
  • Painted matching spinner (available separately)
  • Carbon fiber landing gear and accessories
  • Fast fly and easy build features, such as : Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable
  • NOW COME WITH SIDE FORCE GENERATORS!

 

SS-100-Slick 540

$999.99

Dynam B-26 Marauder Twin Warbird 4S 1.5m (59") w/ Flaps (Silver)

Dynam B-26 Marauder Twin Warbird 4S 1.5m (59") w/ Flaps

RedwingRC Plug-and-Play aircraft!

The Dynam T28 Trojan is a great plane for both beginners and experienced pilots! Just getting started in the hobby or just want to try something new, this plane is for you. The Trojan T28 is made with EPOFLEX (EPO) foam- a damage resistant foam. This aircraft is painted with the famous US Air force color scheme. All surfaces are constructed out of the EPO foam so it is not easily damaged and easily repaired. The Trojan is very stable and is a blast to fly! This is a Plug-and-Play aircraft so it will arrive about 80% complete and included cool scale features such as a clear canopy, retractable landing gears and steerable nose landing-gear .

Build time is around 60 min from box to air.

Expect flight time to be from 6-10 minutes per battery.

 

Key Features:

  • Powerful BM3715 - 890KV outrunner brushless power system
  • 30A Brushless ESC
  • Retractable landing gears
  • Durable and lightweight EPO construction with many surface details
  • Detailed Body Structure
  • Suitable for both, beginner thru experienced Pilots
  • Easy to build
  • Scale 3 blade prop


Specifications:

Wingspan: 50 inch (1270mm)
Overall Length: 39.37 (1000mm)
Flying Weight: 47.61 (1340g) w/Battery
Motor Size: BM3715A-KV890 (installed)
Propeller: 3 Blade - 11 x 7 x 3
Radio / Transmitter 5 Channel Required - NOT INCLUDED
Servos: 4 servos installed ( 4 x 9g )
Speed Control : 1 x Dectrum 30A Brushless
Battery: 11.1V 2200 mah LiPo 20C (Not Included)
Charger: NOT INCLUDED basic 2S - 3SS lipo charger
Flight Times Average (6-10 mins)
Assembly Time

Approx  60min

 

 

 


 

DY8972-B-26-silver

$299.00