FUTABA T6L Sport 2.4GHz T-FHSS Airplane Spec Radio System w/ R3106GF Receiver

3520 650KV Brushless Motor for (55-61" Planes)

The Tomcat G25 Brushless motor. This is a high-end motor combines ultra-high power and super efficient design to deliver outstanding performance.

Specifications

• Type:......................... C-G-3527-KV1140 (G25)
• KV(rpms per volt):... 1140
• No load current: ....... 3.2 A @10V
• Resistance:................ 0.016 ohms
• Watts:........................ up to 860
• Continuous Current:... 48A
• Max Burst Current:.... 56A,10seconds
• Cells:......................... 3–4 S Li-Po
• Recommended Props: 8x6 to 10x10
• Slots,Poles:............... 12,14
• Diameter:.................. 35 mm
• Shaft: Diameter:........ 5.0 mm
• Weight:...................... 180 g
• Brushless ESC:......... 60A

Power Board - PRO SERIES - Black (4106)

All NEW 4000 SERIES! *with Digital Readout and Touch-button programming.

Description:

Completely redesigned from the ground up, with these new Power Boards you are able to use 2 batteries with redundancy to avoid possible crashes from battery failure. Simply plug in your batteries with XT-60 style connectors to this Power Board Expander (Our LiFe batteries are perfect for this) and you now have 2 batteries working in tandem to supply your servos AND ignition.

The Power Board board electronically isolates the batteries from each other so that there is no interference possible from your ignition. It also regulates the voltage down to an ideal voltage to your RX (5v) and then is select-able to your servos (yellow and black units only - the red unit offers the same voltage as your batteries to the servos).

You can Plug in, up to 8 servos into the board (12 servos with the Black Power Board), which has 2 outputs for EACH channel, effectively DOUBLING the number of servos you can use in a plane ( a total of 16 output channels) without reducing the amperage (that a Y cable would cause).

These Power Boards also features LED lights to give you clear indication that your batteries are connected and working properly, as well as voltage etc.

They feature a mounting space in the middle to mount your RX and also include mounting hardware to mount it securely to your plane.





Watch this video for an overview of the different versions


View this video for a full explanation on how to use these power boards




Features:

Black Power Board (4106)

• Dual battery redundancy for safer flying
• LCD display which shows real time info of your in and out voltages
• Built in regulator that supplies a clean 5v to your receiver
• Integrated CDI remote cut off switch to kill your engine (OPTO KILL)
• 8 channels in, 16 channels out (+ ignition)
• Electronically isolated for interference free flying
• Adjustable voltage selection to your servos via the dial on the side (from 4.8v to 9.7)
• Ability to use High voltage servos while providing a clean 5v to your RX
• Battery balancing (draws extremely evenly from your dual battery set up)
• Short Circuit protection (in the unlikely event of a short it will protect from battery drain)
  
  (input voltage MUST be between 6-13v. A 4S Life would be ideal)

Specs:

Black Power Board (4106)

• Input Voltage: 6-13v
• Working load: 0A to 30A
• Weight: 4.5 oz.
• Dimensions: 4.5"x2.5"x5/8"
• Working Temperature: -20c to -85c

Recommended Set ups: Use the Black Power Board for 50cc to 100cc or bigger.

GliderCG Scale Landing Gear Version (Center of Gravity (CG) digital balance device, Designed for Large Models up to 66 lbs (30 kg) with fixed landing gear)

GliderCG Standard V3 (Center of Gravity (CG) digital balance device, Designed for F5J, F3B, and F3F Gliders, Works on all RC model airplanes!)

Based on the original development of Olav Kalhovd, GliderCG is a center of gravity (CG) digital balance device for RC planes able to provide the exact information of where the CG is located on the aircraft via a display which also provides information of the aircrafts's total weight.

Simply place the aircraft/sailplane on the scale and obtain it's CG without trying to balance it on your fingers or mark the wings to supporting them on precarious structures.

Once the aircraft/sailplane is placed on the scale, you can vary the CG by moving e.g. the battery and GliderCG will automatically inform you of the new CG in real-time.  Easy and simple!

The GliderCG family was born with the aim of being able to transfer the concept of digital measurement of the CG to the different types of aircraft and radio control gliders. For this reason there is a specific device for each of the different popular disciplines: GliderCG F3K/DLG, GliderCG Standard, GliderCG Plus and GliderCG Scale. There is a device that will work on all RC aircraft.

GliderCG is constantly being improved and has evolved over time to provide more features and enhancements. Today's GliderCG devices are much more modern and advanced than the initial ones produced in 2018.

Based in the GliderCG v2 platform and with the constant desire for improvement, development on all aspects of the device, both hardware and software, to offer an improved device in a compact form factor for easy transport and storage when not in use.

This model is designed for F5J, F3B, and F3F models however will work on all RC model airplanes meeting the weight and dimension limits below listed in specifications.

FEATURES

• Folding arms with solid locking mechanism
• Battery level indicator (WiFi Interface)
• Sliding lid access to the battery compartment
• Greater stability
• WiFi + OLED LCD display

Additionally, this unit provides the ability to view data through the WiFi connection. The WiFi connection also provides the option to save the CG configuration of different models to review historical readings and the ability to compare readings after e.g. repairs, etc.

GliderCG Standard v3 includes a set of smaller wing adapters to allow the measurement of planes with a narrow wing chord (i.e. DLG/F3K models).

SPECIFICATIONS

• Maximum weight: 17.6 lbs / 8 kg
• Maximum fuselage width: 3.4 in
• Maximum fuselage height (from bottom fuselage to wing bottom): 3.4 in / 86 mm
• Leading edge to rear support pad distance: 5.9 in / 150 mm
• Power: 9V DC (6LR61)

DOCUMENTATION

• GliderCG Standard v3 Manual (PDF)

FREE Shipping for USA only. Contact us at [email protected] to calculate international shipping cost.