LEDs for Night Flying

Contact UsCustomer Reviews

LEDs for Night Flying

Redwing LEDs for Side Force Generators
Redwing LEDs for Side Force Generators
Redwing LEDs for Side Force Generators
Redwing LEDs for Side Force Generators
Redwing LEDs for Side Force Generators
Redwing LEDs for Side Force Generators
Redwing LEDs for Side Force Generators
Market Price: $12.99
Our Price:

$9.99


You Save

23%

Quantity (20)

Availability 20 in stock
Weight 0.10 lbs
SKU SS-LED

Powerful LED array for night flying!

These very bright LED arrays are perfect for night flying and can be easily installed into your SFGs with no trouble. Our SFGs are made to fit SOME of our planes, but with a little modification you can make these SFG fit nearly any wing with a flat outer edge.

The optimum voltage range for this item is 6.6v to 7.4v.

** These LEDs work perfectly with our Side Force Generators! Great for night flying for hours of fun!!!**

**You will need 4 LEDs if you plan to use them with the SFGs- this will provide the optimal amount of light for safe flying. Two LEDS illuminate the top of your plane while the other two illumanate the bottom.**

: *
: *
: *
 

Scorpion SII-3032-690KV (V2) - .52 Glow Equivalent (4-5s)

Scorpion SII-3032-690KV (V2) - .52 Glow Equivalent (4-5s)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Overview

The Tomcat G30cc Motor For 30cc gas airplane This is a high-end motor combines ultra-high power and super efficient design to deliver outstanding performance.

Specifications

  • Type:......................... TC-G-6432-KV200(G30CC)
  • KV(rpms per volt):... 200
  • No load current: ....... 2.2 A @10V
  • Resistance:................ 0.04 ohms
  • Watts:........................ up to 3000
  • Continuous Current:... 65A
  • Max Burst Current:.... 80A,10seconds
  • Cells:......................... 10 S Li-Po
  • Recommended Props: 20x12 to 22x11
  • Slots,Poles:............... 24,20
  • Diameter:.................. 64 mm
  • Shaft: Diameter:........ 10 mm
  • Weight:...................... 680 g
  • Brushless ESC:......... 100A

MTR-0136

$159.99

GliderCG Scale Mini Version (Center of Gravity (CG) digital balance device, Compact Design for Large Models up to 55lbs (25 kg) with/without landing gear)

GliderCG Scale Mini Version (Center of Gravity (CG) digital balance device, Compact Design for Large Models up to 55lbs (25 kg) with/without landing gear)

GliderCG Standard V3 (Center of Gravity (CG) digital balance device, Designed for F5J, F3B, and F3F Gliders, Works on all RC model airplanes!)

Based on the original development of Olav Kalhovd, GliderCG is a center of gravity (CG) digital balance device for RC planes able to provide the exact information of where the CG is located on the aircraft via a display which also provides information of the aircrafts's total weight.

Simply place the aircraft/sailplane on the scale and obtain it's CG without trying to balance it on your fingers or mark the wings to supporting them on precarious structures.

Once the aircraft/sailplane is placed on the scale, you can vary the CG by moving e.g. the battery and GliderCG will automatically inform you of the new CG in real-time.  Easy and simple!

The GliderCG family was born with the aim of being able to transfer the concept of digital measurement of the CG to the different types of aircraft and radio control gliders. For this reason there is a specific device for each of the different popular disciplines: GliderCG F3K/DLG, GliderCG Standard, GliderCG Plus and GliderCG Scale. There is a device that will work on all RC aircraft.

GliderCG is constantly being improved and has evolved over time to provide more features and enhancements. Today's GliderCG devices are much more modern and advanced than the initial ones produced in 2018.

Based in the GliderCG v2 platform and with the constant desire for improvement, development on all aspects of the device, both hardware and software, to offer an improved device in a compact form factor for easy transport and storage when not in use.

This model is designed for F5J, F3B, and F3F models however will work on all RC model airplanes meeting the weight and dimension limits below listed in specifications.

FEATURES

  • Folding arms with solid locking mechanism
  • Battery level indicator (WiFi Interface)
  • Sliding lid access to the battery compartment
  • Greater stability
  • WiFi + OLED LCD display

Additionally, this unit provides the ability to view data through the WiFi connection. The WiFi connection also provides the option to save the CG configuration of different models to review historical readings and the ability to compare readings after e.g. repairs, etc.

GliderCG Standard v3 includes a set of smaller wing adapters to allow the measurement of planes with a narrow wing chord (i.e. DLG/F3K models).

Stacks Image 65

SPECIFICATIONS

  • Maximum weight: 17.6 lbs / 8 kg
  • Maximum fuselage width: 3.4 in
  • Maximum fuselage height (from bottom fuselage to wing bottom): 3.4 in / 86 mm
  • Leading edge to rear support pad distance: 5.9 in / 150 mm
  • Power: 9V DC (6LR61)


DOCUMENTATION

FREE Shipping for USA only. Contact us at [email protected] to calculate international shipping cost.

CG-scale-mini

$579.00

79" (2M) Scale Wilga PZL-104 (20-26cc) ARF-Red

  • 79" (2M) Scale Wilga PZL-104 (20-26cc)

Description:

50cc Monsun 102"

The Monsun is an exciting airframe to look at and just spectacular to see in the air. Complete with step ladder, navigation and landing lights, front wheel steering, and more! The 50cc Monsun is a masterpiece that will amaze you and your friends at the flying field. Get ready for a new flying experience!

Product Manual



Specifications:*(More Coming Soon)*

  • Wing span: 2590.8mm/102in
  • Wing area: 91.67sq.dm
  • All up flying weight:
  • Length: 1837mm/72.in
  • Cowl:
    • Inside Width: 12.5 in
    • Inside Height: 10 in
  • Engine: 50cc - 60cc
  • Radio: 4-6 Channels, at least 6 servos (10-15KG torque)
  • Receiver Battery: 4.8-6V
  • Recommended Spinner Size: 3.5in
  • Recommended Prop Size: 22x8, 22x10
  • Recommended CG: 138mm measured from leading edge
  • Recommended Throws:
    • Low Rates Settings | High Rate Settings
    • Rudder: |
    • Ailerons: |
    • Elevator: |

 

Features:

  • ARF airplane model
  • Bonnet GRP
  • Fuselage and wings in wood construction; Balsa (laser-cut)
  • High-quality film ready made
  • Excellent flight characteristics
  • Perfect for towing gliders
  • Fully functional landing flaps
  • Scale-chassis; Main landing gear, strap made of CFRP
  • Front suspension with aluminum shock absorbers
  • Professional, newly developed joint members; GFK control horns and servo arms CFK
  • LED position lights
  • Pre-painted fiberglass cowl
  • Wheels, linkages, small parts, illustrated instructions
  • Removable Wings
  • Ringed Cowl
  • Adjustable push rods
  • Painted Spinner (Optional)
  • Fast fly and easy build features such as: Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable


30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes 30cc rc planes



DLE 35ra DLE55


Build & Ship Plane

SS-Wilga-20-Red

$389.99