T-40 Trainer 1.55M Wingspan Laser-Cut Wood Model Kit (PNP Electric Power version)

Ask a question about this product

Printable version

Options

Our Price:

$199.99

Quantity

OUT OF STOCK

Notify me when back in stock

Details


Availability	No items available
Weight	5.00 lbs
SKU	DW-T4004

T-40 Trainer 1.55M Wingspan Balsa Wood Laser-Cut Kit Electric Aircraft PNP Version

Our model captures the very essence of an entry level Trainer aircarft. This plane kit ican be gas or electric powered and is built from balsa and hardwoods with all the parts beautifully laser cut that are extremely accurate allowing you to build the perfect model. This trainer PNP kit is easy to assemble and stable to ffy and is electric powered and comes with everything you need except your battery, and RX/TX.

Specification:
Wingspan: 1550mm
Length: 1150mm
Flying Weight: ≈1.9kg
Radio: more than 4CH
Power System (Included):
Motor: 2820-3520 600-1000KV
ESC: 40-60A 4S
Servo: 17g * 4pcs
Propeller: 12-13 in
Battery: 4S 2800-4000 mAh (Not incl.)
Content Listing:
1* T40 EP or GP Balsa KIT (1.6M) (un-assembled)
1* Instruction Manual
Optional models as below:

T4004=T40 EP & GP BalsaKIT(1.6M)+Motor+ESC(60A ZTW+XT60 Plug)+Servo(17g*4)

$20 Flat rate shipping lower US 48 only. Contact us at [email protected] to calculate international shipping cost.

Fourtitude V2 Gas Tank- 8oz

The NEW Fortitude V2 gas tanks are here!!!

*Fourtitude has amended their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!

Make sure to upgrade asap as this new and improved design is the cutting edge of next generation RC gas tanks. You are probably familiar with the old design- with the the line-in and the vent nozzle on the top of the tank and the line running to the engine on the cap. Because there are so many different fitting and sealants, there are alot of places where something can go wrong or start leaking.

The V2 design eliminates ALL of these problems with ONE SIMPLE DESIGN..... ALL nozzles are in the removable cap which has TWO rubber gaskets and is ONE SOLID PIECE, which includes the vent tube and filling tube. Fewer parts = Fewer problems.

Fortitude has hit the target with the V2 Tank and as always, is the best quality you can get!

Fortitude (or 4titude) gas tanks are high quality, crystal clear plastic tanks, that take the guesswork and worry out of your tanks. You can clearly see into the 4titude tank to know if your line is still flexible and your clunk is in place! Fortitude tanks include the foam, the Velcro and the tubing to hook to your engine!

4titude tanks are SUPER light, in fact, the lightest commercially available tanks on the market. They use aerospace grade adhesives to ensure long life. 4titude tanks are also made of seamless plastic, making them fully resistant to splitting!

The included clunk is filtered as well.

Video:

V2 Features:

Injection Molded Single piece glass filled nylon fitting manifold. Light weight extremely strong material that creates a very easy to plumb and compact fuel tank.

Dual static O-ring seals, designed utilizing the latest aerospace engineering technology, to seal fluid even under high pressure. V2 has one potential leak point and with the redundant static seals we have double assurance it will never leak.

Plumbed with a filtered clunk and an extended fill/ drain tube to make it easy to drain the tank completely.

Zero protrusions/ fittings on the outside of the tank to interfere with tight airframe installations.

We took care of making sure there is zero guess work involving installation. 3D diagram included with each tank showing how to properly plumb your fuel system for the best results.

Note the length dimension is from the back of the tank to the front of the fitting/tubing barbs.

Specs:

Size: 8 ounce (236 ML)
- Length 5 3/8” x Width 1 7/8" x Height 1 7/8” (136.5 x 49.5 x 49.5 mm)
Weight: 1 ounce
Fittings are part of the cap/ internal tubing
Filtered clunk
Super light!
Crystal clear
Seamless
Includes: Tank/foam/velcro
Fourtitude Tanks are compatible with gas engines only. (Not compatible with Glow fuel)

Fortitude tanks are compatible with ALL oils, synthetic and non-synthetic. Fortitude uses PPG Class B sealant. The expert below explains how high tech and quality of a sealant it is:

“PPG Class B is an aircraft integral fuel tank sealant. It has a service temperature range from - 65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material is designed for fillet sealing of fuel tanks and other air- craft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after pro- longed exposure to both jet fuel and aviation gas. "

FORS2008

$21.99 21.99

BLS-30A, HV-DIGITAL, HIGH TORQUE, HIGH SPEED, BRUSHLESS +Servo Arm

BLS-30A, HV-DIGITAL, HIGH TORQUE, HIGH SPEED, BRUSHLESS

BBR-BLS-30A

$93.99 93.99

PULSE LIPO 3800mAh 2S 7.4V - For FrSky QX7 and DX7S/DX8/DX9 TX - LiPo Battery

PULSE LIPO 4000mAh 2S 7.4V - For DX7S/DX8/DX9 TX - LiPo Battery

Description:

Pulse Lithium Polymer Batteries - Setting a New Standard.

As Lithium Polymer battery technology continues to push new boundaries, Pulse Lithium Polymer Batteries bring a whole new element into the mix - power & performance at a price that simply can't be ignored.

Designed specifically for the demands of the latest power plants, not to mention the new realm of extreme 3D flight, Pulse brings a whole new battery to bear at a cost never seen before. Simply put, premium power no longer comes at a premium price.

Incorporating the latest advancements in Lithium Polymer technology, Pulse Batteries are designed to bring performance levels to a new stratosphere with 35C, 45C, and 65C battery packs in multiple capacities for the helicopter of your choice. Add the 5C charge rates, and the fun just begins.

Pulse Lithium Polymer Batteries - Can You Feel Your Pulse Quicken?