Booma RC Adjustable Voltage Boost (Step Up) Regulator
Quick overview--Adjustable Voltage Boost Regulator range between 3.5v to 32v output. Use this regulator in turbine and scale propeller models to get the most out of the AR lighting system. Connect it to a 2 cell LiFe/Lion receiver pack and adjust the output up to 13.5 volts. This will give the maximum brightness for the AR ILS-01 system. This regulator allows pilots to drive several voltage systems like electric retracts, hydraulic retracts lights and or mini air compressor from a single battery. The uses for this regulator are endless. So, if you need to drive a higher voltage system like the AR ILS-01 lighting system or a retract set then this clever voltage boost (step up regulator) is the ideal choice. You simply connect any battery from 3.5 volts to the input, dial up the required output voltage by turning the multi turn voltage adjustment screw and your done. - Works with all RC battery chemistries (minimum battery pack input voltage of 3.5 volts). - Adjustable regulation voltage range from battery input voltage up to 32 volts on output. - Up to 5 Amp (Max) input current capability. - 3.7 V to 5 V / 2 A 82.5% efficiency - Ideal to drive the AR lighting system from a lower voltage battery. - Allows mixing lights/electric or hydraulic retracts/mini air compressor etc. from a single auxiliary battery. |
Aluminum Hub Rubber Wheels
|
Description: These Aluminum Hub Wheels are made with High Quality Rubber tires that will make landing softly a breeze. Designed to fit 20cc to 170cc
Pricing
Weight (for two wheels)
|
GW-KAG0-
$18.99
MSA-1E 1/24 Scale Coyote Pup 4WD Crawler RTR, w/ 2.4 GHz KD Propo Radio
| MSA-1E 1/24 Scale Subaru Brat 4WD Crawler RTR, w/ 2.4GHz KD Propo Radio |
CIS79368
$119.99
DuBro Spinner (3-Blade)
| Dubro Spinner (3-Blade)
Description:Bob Smith Industries CA Glue Super-Gold+™ Odorless, CASUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Works Best On:
Works Good On:
Avaliable in 2oz and 3/4 Pocket Size. Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.
|
DUB-Spinner-3-Blade
$9.99
