It is that time year with RC Events--Redwing RC Office will be closed 20-24 Apr. Orders can still be accepted during these times and will be processed in the order received. If you need the item urgently (moved to top of the list), select Priority express and we will do our best to rush the order out to you when we return.

Booma RC Adjustable Voltage Boost (Step Up) Regulator

Ask a question about this product

Printable version

Options

Market Price: $39.95

Our Price:

$29.95

You Save

25%

Quantity (10)

Details


Availability	10 in stock
Weight	0.10 lbs
SKU	BRC-434
Manufacturer	Booma RC

Quick overview--Adjustable Voltage Boost Regulator range between 3.5v to 32v output.

Use this regulator in turbine and scale propeller models to get the most out of the AR lighting system. Connect it to a 2 cell LiFe/Lion receiver pack and adjust the output up to 13.5 volts. This will give the maximum brightness for the AR ILS-01 system. This regulator allows pilots to drive several voltage systems like electric retracts, hydraulic retracts lights and or mini air compressor from a single battery. The uses for this regulator are endless.

So, if you need to drive a higher voltage system like the AR ILS-01 lighting system or a retract set then this clever voltage boost (step up regulator) is the ideal choice. You simply connect any battery from 3.5 volts to the input, dial up the required output voltage by turning the multi turn voltage adjustment screw and your done.

- Works with all RC battery chemistries (minimum battery pack input voltage of 3.5 volts).

- Adjustable regulation voltage range from battery input voltage up to 32 volts on output.

- Up to 5 Amp (Max) input current capability.

- 3.7 V to 5 V / 2 A 82.5% efficiency
- 5 V to 12 v / 2 A 88.4% efficiency
- 7.4 V to 12 V / 2 A 90.2% efficiency

- Ideal to drive the AR lighting system from a lower voltage battery.

- Allows mixing lights/electric or hydraulic retracts/mini air compressor etc. from a single auxiliary battery.

- Weight 37 grams.

- Dimensions 67mm x 42mm.

LEDs for Night Flying

LEDs for Night Flying Powerful LED array for Side Force Generators.

These very bright LED arrays are perfect for night flying and can be easily installed into your SFGs with no trouble. The SFGs are made to fit SOME of our planes, but with a little modification you can make these SFG fit nearly any wing with a flat outer edge.

The optimum voltage range for this item is 6.6v to 7.4v.

** These LEDs work perfectly with our Side Force Generators! Great for night flying for hours of fun!!!**

**You will need 4 LEDs if you plan to use them with the SFGs- this will provide the optimal amount of light for safe flying. Two LEDS illuminate the top of your plane while the other two illumanate the bottom.**

CLICK HERE for Side Force Generators!

SS-LED

$9.99 9.99

1.7g Ultra Micro Digital Servo 0.075kg / 0.05sec For 1:35 Scaler

1.7g Mini JST Ultra Micro Digital Servo 0.075kg / 0.05sec For 1:35 Scaler

AGF-C017CLS

$9.99 9.99

89" Glider-Tow/Trainer (2.25M) Scale Wilga PZL-104 (30-35cc) ARF-Blue

89" (2.25M) Scale Wilga PZL-104 (35cc) ARF-Red

50cc Monsun 102"

The Monsun is an exciting airframe to look at and just spectacular to see in the air. Complete with step ladder, navigation and landing lights, front wheel steering, and more! The 50cc Monsun is a masterpiece that will amaze you and your friends at the flying field. Get ready for a new flying experience!

Product Manual

Specifications:*(More Coming Soon)*

Wing span: 2590.8mm/102in
Wing area: 91.67sq.dm
All up flying weight:
Length: 1837mm/72.in
Cowl:
- Inside Width: 12.5 in
- Inside Height: 10 in
Engine: 50cc - 60cc
Radio: 4-6 Channels, at least 6 servos (10-15KG torque)
Receiver Battery: 4.8-6V
Recommended Spinner Size: 3.5in
Recommended Prop Size: 22x8, 22x10
Recommended CG: 138mm measured from leading edge
Recommended Throws:
- Low Rates Settings | High Rate Settings
- Rudder: |
- Ailerons: |
- Elevator: |

Features:

ARF airplane model
Bonnet GRP
Fuselage and wings in wood construction; Balsa (laser-cut)
High-quality film ready made
Excellent flight characteristics
Perfect for towing gliders
Fully functional landing flaps
Scale-chassis; Main landing gear, strap made of CFRP
Front suspension with aluminum shock absorbers
Professional, newly developed joint members; GFK control horns and servo arms CFK
LED position lights
Pre-painted fiberglass cowl
Wheels, linkages, small parts, illustrated instructions
Removable Wings
Ringed Cowl
Adjustable push rods
Painted Spinner (Optional)
Fast fly and easy build features such as: Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable