Raptor H650 Sea Land Air 490mm Wingspan 2.4GHz 6CH Smart Balance Gyro EPP RTF
| Raptor H650 Sea Land Air 490mm Wingspan 2.4GHz 6CH Smart Balance EPP RC Do you feel the need for speed? Check out this unique 3-1 Sea, Land and Air turbo prop jet! This is a High Speed Turbo Prop Sport 3D Jet that will takeoff and land on the water or land (launch from cement or asphalt road, sand stone land, park lawn, water, etc., can also be hand thrown)...How cool is that?! With the balanced Flight Controller pilots can perform 3D maneuvers like, 360 degree flips, front flip, back flip, and roll. The H650 is constructed with EPO crash resilient foam and it is pre-painted saving you time. If that's not enough, all waterproof servos, turbo prop, and ESC are factory pre-installed. This airplane is designed for High-Speed flying which is made possible with a powerful Brushless Motor for High-Performance flying. In case you were wondering, this model is one of the fastest EPO Turbo Prop jets on the market. And finally, it comes with 2 LED bars that are already pre-installed on the leading edge of the wings for some spectacular night flying! Complete RTF bundle with everything in the box and comes with a built in gyro system for rock solid flight stabilization. It flies absolutely great right out of box without having to do any additional setup. Its very beginner friendly with its built in flight stabilization system and offers plenty of flight time on single 2S 1000mAh battery. Key Features:
Specifications:
|
Big HLK-31 Land Sea Plane
Big Brother HLK-31 Land Sea Plane
Raptor H650 RTF
Raptor H650 Air Land and Sea RTF
HLK-31 Land and Sea 630mm Turbo Prop Jet w/Auto-return 3D Stunt RTF
| HLK-31 Land and Sea 630mm Jet RTF Do you feel the need for speed? Check out the Dynam Meteor V2. This is a High Speed 70mm EDF Sport Jet that features retracts! How cool is that?! The Meteor V2 is constructed with EPO crash resilient foam and it is pre-painted saving you time. If that's not enough, all servos, 70mm Fan, and the 60Amp ESC are factory pre-installed. This airplane is designed for High-Speed flying which is made possible with a powerful Brushless Electric Ducted-Fan. The Fan Unit is is very well constructed for High-Performance flying. In case you were wondering, this model is absolutely one of the fastest EPO EDF jet on the market.
Key Features:
Specifications:
|
HLK-31-Seaplane
$229.99
HiTec D-645MW 32-Bit, High Torque Metal Gear Servo .17sec/180oz @ 7.4v
| D-645MW 32-Bit, High Torque Metal Gear Servo .17sec/180oz @ 7.4v
|
HS-D645 MW
$39.99
JST-XH 2-6S Lipo Battery Charger Balance Board
| JST-XH 2-6S Lipo Battery Charger Balance Board This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing. |
Bal-Board-JST-XH
$5.99
1oz Z-Poxy 5 Min Syringe
| 1oz Z-Poxy 5 Min Syringe
Description:Bob Smith Industries CA Glue Super-Gold+™ Odorless, CASUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Works Best On:
Works Good On:
Avaliable in 2oz and 3/4 Pocket Size. Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.
|
PT-36
$5.99
