Bat-Safe 12" Balancing Cable Extension Set (5)
| Description: JST-HX Balance Wire Set for Bat-Safe and Bat-Safe XL The Bat-Safe Balance Cable Set consist of five 12” long Balance Extension wires with JST-XH connectors that can be used for LiPo balancing, charging, or discharging. Any charger that uses an XH balance board or plug can accept these extensions and is a perfect solution moving the battery away from the charger and use for the Bat-Safe charging boxes. The package includes the following extensions (these can be interconnected for extended lengths):
1 set required for your regular size Bat-Safe Battery Charging Safe Box, as standard balancing wires are too short! 12 inches (300mm) long. For the New Bat-Safe XL Battery Charging Safe Box, requires 2 sets of balance wires for a total length of 24 inches (600mm) long. These 12" extensions can also be used as JST extensions for your aircraft allowing pilots to mount a LiFe battery to an inaccessible area and route the wire to an area where it can easily be balanced charged (for example, mounting it to the firewall and then using the extension to route it to the fuselage where you can easily connect it to a balance charger). |
BAT-SAFE XL Lithium Battery Charging Box
| BAT-SAFE XL Lithium Battery Charging Box
Description: This flame retardant bag is a convenient way of safeguarding your LiPo batteries during charging, transit, and storage. Just place your battery or batteries in the bag, route the charge wires through the vents at either side of the top flap, and close the flap. ***Please Note: The use of a LiPo Guard is intended to reduce damages in an accident and will not necessarily prevent damage to surrounding objects. Never charge batteries unattended and please follow all safe charging and storage practices.***
Dimensions:
|
BAT-SAFEXL
$139.99
BAT-SAFE Lithium Battery Charging Box
| BAT-SAFE Lithium Battery Charging Box ag is a convenient way of safeguarding your LiPo batteries during charging, transit, and storage. Just place your battery or batteries in the bag, route the charge wires through the vents at either side of the top flap, and close the flap. ***Please Note: The use of a LiPo Guard is intended to reduce damages in an accident and will not necessarily prevent damage to surrounding objects. Never charge batteries unattended and please follow all safe charging and storage practices.***
Dimensions:
|
BAT-SAFE
$59.00
24" Charge/Balance Lead Extension Kit
24" Charge / Balance Lead Extension Kit8-Function Charge Adapter to Male 4mm Bullets-300mm Wire Racer's Edge provides an ideal solution for enthusiasts with multiple models using batteries with various connectors. This convenient charging squid comes equipped with virtually every possible connector that a modeler may require. Plugs included: Tamiya, Deans, TRX, XT60, JST, EC3, universal receiver pack, and if we've forgotten anything there is a pre-tinned pair of wires awaiting installation of your favorite connector. |
EX-HRP-RCE1615
$17.99
DLE Prop Drill Guide DLE85 DLE111 DLE120
| Description: |
DLP-DJ-120
$25.99
MKS X8/X6 2" Carbon Arm
MKS X8/X6 2" Carbon Arm
|
MKS-Carbon2.0
$7.99
Detrum MSR66A 6CH mini receiver with Istone stabilizer (W/ABS system)
| Detrum MSR66A 6CH mini receiver with Istone stabilizer (W/ABS system) |
DY-DM38101
$42.99
