HiTec HS-7980TH Mega Torque High Voltage Coreless Titanium Gear Servo

Contact UsCustomer Reviews

HiTec HS-7980TH Mega Torque High Voltage Coreless Titanium Gear Servo

Market Price: $309.95
Our Price:

$174.99


You Save

44%

Quantity

OUT OF STOCK


Availability No items available
Weight 0.38 lbs
SKU HRC37980S
Manufacturer Hitec

Replaced with HS-M7990TH High Voltage, Mega Torque, Magnetic Encoder Ultra Premium Servo .17sec/611oz @ 7.4v

This is a special order item and is subject to manufacturer availability.
Please allow a minimum of 2 weeks for delivery.
No returns or cancellations allowed.

email us at [email protected] for ordering

------------------------------------------------------------------------------------

This is the Hitec HS-7980TH Mega Torque High Voltage Digital Servo, and is intended for use with any high performance giant scale aircraft, truggies and buggies, fast power boats, the largest aircraft, monster trucks or anywhere else you can use 600+ inch ounces of torque in. 

Hitec's strongest servo period, the "Monster Torque" HS-7980TH is designed to operate on a two cell LiPo Pack. Featuring the high resolution "G2.5" 12 bit generation programmable digital circuit and indestructible Titanium gears, The HS-7980TH has the performance and durability you've come to expect from a Hitec servo. Other features in the HS-7980TH include a 7.4V optimized coreless motor, integrated heat sink case, and a top case with two hardened steel gear pins supported by axial brass bushing.

Features:

  • G2.5 12 bit Digital Programmable Circuit
  • Titanium Gear Train (MK first gear)
  • Ultra Performance Coreless Motor
  • Integrated Heatsink Case
  • (8) O-Rings for Water/Dust/Fuel protection
  • Dual Ball Bearing Supported Output Shaft
  • 10% larger than a HS-7955TG

Programmable Features Include:

  • Dead Band Width
  • Direction of Rotation
  • Speed of Rotation (slower)
  • End Points
  • Neutral Points
  • Fail Safe On/Off
  • Fail Safe Point
  • Overload Protection* (default is off) 

Note: These features are only programmable with the HFP-20, HPP-20 or HPP-21 programmers.

Specifications:

  • Motor Type: Coreless
  • Bearing Type: Dual Ball Bearing
  • Speed:
    • @ 6.0V: 0.20 sec/60 ° 
    • @ 7.4V: 0.17 sec/60° 
  • Torque:
    • @ 6.0V: 500 oz/in (38.0 kg./cm) 
    • @ 7.4V: 611 oz/in (46 kg./cm) 
  • Dimensions: 1.72x0.88x1.57 in (43.69x22.35x39.88mm)
  • Weight: 2.70 oz (76.54g)
: *
: *
: *
 

NEW

Fourtitude Dual Tank Mounting Trays 32oz

This item is a must have if you are running a smoke system. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes. Mounting dual tanks has always been tough because most aircraft have lightning holes right where you need to place the velcro straps. With this tray you mount it to the aircraft tank floor with wood screws. Then you can easily mount the tanks with just one velcro strap on the back of the tanks.

FORA1232

$15.99

GT Power Aircraft Navigation Lighting System

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

GT Power Servo Consistency Master.

With this cool device you can test up to 3 servos at a time for consistency and precision. With the GT Power servo tester you can see how servos react in three different testing modes. Manual, Neutral, and Automatic.

---

Manual Mode:: Turn the knob at different speeds however you want to check reaction time.

Neutral Mode:: Make the servo go back to the neutral position.

Automatic Mode:: "window wiper mode"- make the servo swing back and fourth at max angle.

---

Specs:

  • Connect 1-3 servos simultaneously
  • Test in 3 different modes
  • Easy to read labels
  • LED lights

GT-Light-NAV-SYST

$21.99

Spektrum AR400 4-Channel DSMX Aircraft Receiver

AR400 4-Channel DSMX Aircraft Receiver

Features:

  • Submarine Waterproof: HV 4.8-8.4V
  • Internal Steel Gears / All CNC Aluminum Casing
  • Anodized Color: REEFS GREY
  • Custom spool kit includes: 7075 LOWPRO CNC MACHINED SPOOL w/ Clear Finish
    • 5Ft Silicone Coated Steel Braided Line, w/ Scale Recovery Hook
  • BEC Not Required

Specifications:

  • Torque:
    • 280 oz/in at 6.0V 
    • 300 oz/in at 7.4V
    • 320 oz/in at 8.4V
  • Speed:
    • 0.07 sec at 6.0V
    • 0.06 sec at 7.4V
    • 0.057 sec at 8.4V
  • Voltage: 4.8 ~ 8.4 DC Volts
  • Spline: 25T

SPMAR400

$29.99