RedwingRC 2550mAh 3S 11.1V - Transmitter Battery - LiPo Battery

Contact UsCustomer Reviews

RedwingRC 2550mAh 3S 11.1V - Transmitter Battery - LiPo Battery

Our Price:

$25.99


Quantity (19)

Availability 19 in stock
Weight 1.00 lbs
SKU RWTX-2550-3S
Manufacturer Redwing RC

Redwing RC is an authorized ONBO, Gens Ace/Tattu, ManiaX and Pulse Battery dealer. If you do not see the size and type of battery you need please email us. We can get just about any battery you need and have it shipped directly to you. Just let us know how we can help you. We will also price match just send us the link of the same item.

Redwing RC Transmitter Batteries are comparable to name brand batteries but more economical!

These transmitter batteries are designed for one purpose in mind - keeping you flying, rather than you worrying about the state of charge with your stock transmitter packs. Due to the chemistry of LiPo batteries, when you charge this RWRC transmitter battery, you will be rewarded with an incredible increase in standby / operating time with your transmitter, and when properly used, you will never end up at the field with a transmitter in need of charge.

Go ahead! Fly all day & more, and never worry again about your transmitter battery quitting before you do - RWRC Transmitter Batteries keep the fun going all day long & much, much more!
 

Specifications:

  • Nominal voltage: 11.1V (After full charged is 12.6V)
  • Cell Count: 3S
  • Capacity: 2550mAh
  • Dimensions: 95mm x 30mm x 27mm (LxWxH)
  • Weight: 152g
  • Charge Rate: 1C
  • EC3 and JR connector with 3S balance lead

RWRC 2500mAh 3S 3C Lipo Transmitter Pack (Futaba/JR/Taranis), fits the Futaba 9C, 10C, and FR-Sky Taranis transmitters

Product Note: 

  • This transmitter battery is designed for 1C charge rate and a 6C discharge rate - do NOT exceed greater than 1C during the charging of this LiPo battery. Any charge rate greater than 1C / discharge rate greater than 6C will immediately void the warranty and very well may end up in pack destruction via fire. It is the end users responsibility to ensure proper safe charging practices, so please be aware of this.Also, please be SURE to charge this transmitter pack with a designated LiPo battery charger - do NOT attempt to charge this battery inside the transmitter via the stock transmitter charger - if done so, this battery WILL fail, and will have the potential of fire, resulting in serious harm to the transmitter and surrounding areas. Any attempt to charge this battery without a designated LiPo balance charger will immediately void the warranty in full, so please be aware.
  •  Warning: This LiPo transmitter battery is intended to power a transmitter only, and is in no way designed for use as a flight power system, such as powering a motor / ESC system. Due to the lower discharge rate and lighter gauge wiring, any use as a flight pack will immediately void the warranty of this LiPo battery, and very well may cause battery failure.

****Batteries must ship surface mail due to hazmat restrictions and have been taking longer to reach destination****Express and Priority mail are not an option for surface ground mail.

: *
: *
: *
 

Pulse Ultra PLC100 AC/DC Multi-Chemistry Smart Battery Charger

Description:
With this Imax B6AC multi charger, you can charge using a battery at the feild or your ac plug at home! You can charge up to 6 cell batteries. It's capable of charging most types of batteries, LIFE LIPO LION (A123) NICAD NIMH ETC

If you have a splitter you can charge 2/3 cell batteries at once (using an adapter)



Specifications:

  • Input Voltage: DC 11-18V / AC in: 100V-240V 50-60Hz
  • Circuit power: Max Charge: 50W / Max Discharge: 5W
  • Charge Current Range: 0.1-5.0A
  • Discharge current range: 0.1-1.0A
  • Ni-MH/NiCd cells: 1-15
  • Li-ion/Poly cells: 1-6
  • Pb battery voltage: 2V-20V
  • Weight: 531g
  • Dimensions: 134x142x36mm

 

 

 


 

 

 

Features:

  • iMax B6AC 1-6 Cells Digital Multifunctional Balance Charger
  • 100-240v AC input or 11-18V DC input
  • Microprocessor controlled
  • Delta-peak sensitivity
  • Individual cell balancing
  • Li-ion, LiPo and LiFe capable
  • Ni-Cd and NiMH capable
  • Large range of charge currents
  • Store function, allows safe storage current
  • Time limit function
  • Input voltage monitoring. (Protects car batteries at the field)
  • Data storage (Store up to 5 packs in memory)
  • Battery break in and cycling.

 

 


 

 

Package Contents:

  • iMax B6AC 1-6 Cells Digital Multifunctional Balance Charger
  • 4mm Banana Plug to Male Deans style connector
  • A female Deans style connector to a pair of Alligator clips
  • A female Deans style connector to a female Futaba style servo connector
  • A female Deans style connector female JST style connector
  • A female Deans style connector to Glow Plug type connector
  • Power Cord
  • User Manual

 

 

 

 

 

PLC-100

$59.99

Pulse CellMeter 8 - Lipo Battery Checker & Servo Tester

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

The Pulse CellMeter-8 is the latest version of battery testers - and is now available to our Redwing customers! If you want a new, easy to use, digital battery and capacity tester, your search is over. The Pulse CellMeter-8 can check the overall and individual voltage of 2 through 8 celled, LiPo / LiFe / Li-Ion batteries and 4 through 8 celled, Nicd / NiMH batteries - as well as instantly provide you with your remaining capacity. Did I mention that happens INSTANTLY? We can't make this stuff up.

This nifty little checker does more than that! The cell button allows you to balance your packs as well. So this isn't your typical bettery tester - but a balancer built in.

 

Features:

  • High visibility LCD display screen
  • Easy to use Menus
  • Full instructions included
  • Balance Mode
  • Port for balance plug for up to 8 cell Lipo, LiFe, or Li-Ion batteries
  • Instant Battery capacity graph
  • Can be used as Servo tester to test standard and narrow servo.
  • Port for discharge plug of NiMh/NiCd batteries
  • Can be used to check the battery voltage of Lithium batteries including Lipo, LiFe, Li-Ion, as well as NiMH and NiCd batteries.
  • Measure the voltage of both individual cells and full battery voltage, can also indicate the highest voltage cell, lowest voltage cell and voltage differential between cells

Specification:
Discharge Current: 1A
Balance Current: 1A
Battery Voltage Test Precision: 0.001V
Battery Type: Can test Li-Po/Li-lon/Li-Fe(2-8S),NiCd/NiMH(4-8S) battery
Servo Test Range: 1000-2000us or 500-2500us

 

PLU-CELLMETER8

$14.99

FuriousFPV MOSKITO 70 (FRSKY) - The Perfect WHOOP

Thrust UAV Riot 250R Pro Edition Racing Drone

PRS-FPV-MOS70FR

$249.99

Hellcat V2 4S with Flaps

Description:

*Free shipping is for continental US only

RedwingRC Plug-and-Play aircraft!

Say hello to the F6F, also known as the Hellcat. This plug and play version is made from EPO foam which has proven to be crash resistant. If you are a warbird enthusiast, then the Hellcat is a must!

Superb maneuverability at slow speeds even at low speeds and designed for large loops, knife edges, and inverted flights! Just like all the planes from Dynam RC, the Dynam F4F Hellcat comes with a pre-painted finish and is an excellent representation of the real thing. The pre-installed retracts are a super great feature that really add to the scale appearance of the plane. With the PNP Hellcat you can experience the NEW retract system- now the landing gears rotate and tuck into the wings.

Bonus Feature: The Dynam Hellcat F4F is flap ready. The wings have the cutouts for the servos and hinges. You will need to supply the servos and servo reverser (if your radio does not have this feature)

All servos, ESCs and motors are factory installed from the Factory. The Detrum brushless motor provides plenty of power for sporty scale flying.

Build time is around 45- 60 min from box to air. Expect flight time to be from 8-12 minutes, but all depends how fast you fly.

 

Key Features:

  • Retractable landing gear allow for smooth takeoffs and landings and scale flying
  • Powerful Detrum BM3170 brushless motor (500kv)
  • 40A Brushless ESC with Switch-Mode BEC
  • Durable and lightweight EPO construction with many surface details
  • Excellent Flight Performance
  • Detailed Body Structure
  • Steerable tail wheel.

 

Specifications:

Wingspan: 50in (1270mm)
Overall Length: 41.5in (1054mm)
Flying Weight: 1600g (1600g) w/Battery
Motor Size: BM 3170 500kv (installed)
Propeller: Dynam 13 x 7 x 3 (3 bladed prop)
Radio / Transmitter 5 Channel (NOT INCLUDED)
Receiver 5+ Channel (not included)
Servos: 4 servos total (2 x 9g & 2 x 17g) - Installed
Speed Control : 40Amp (dectrum) - Installed
Battery: 14.8C LiPo 2200 mah (Not Included)
Charger:  
Flight Times

8 to 12 Min

Assembly Time

45 to 60 min

 

 

 


 

DY8958

$259.00

Hot RC Transmitter HT-8A Digital TX/RX 8ch set (TX+8ch RX)

Hot RC Transmitter HT-8A Digital Transmitter 8ch set (TX+8ch RX)

DW-HT8A-Radio

$59.99

GT-Cygnus F3L and F5L RES 1970mm ARF (F3/F5-RES Competition Pure Glider or Electric Motor)

GT-Cygnus F5L RES Catapult Launch Glider 1970mm ARF (Electric Motor)

The GT2000v2 Powered Glider is a high-performance competition grade glider with light weight carbon fiber and wood construction ideal for precision competition or a gentle relaxing flight. With its elegant wings and carbon fiber fuselage it responds superbly to thermals.

The GT2000v2 version has integrated carbon fiber throughout the model to maximize strength and performance while improving the quality, reducing weight and increasing the performance of glider. Below is a list of improvements from version 1:

  • Thinner/lighter fiberglass battery compartment
  • Carbon fiber canopy and tail pipe
  • Wings constructed with carbon fiber main beam and carbon tube latch with three-stage plug-in structure design for easy transport
  • Thinner wings and optimized airfoil to improve gliding performance
  • Most accessories are made of carbon fiber with improved strength and lighter weight
  • Tail wing incorporates a torsion spring to improve return to center and lighter weight structure

Maximized strength is provided with the carbon fiber tail pipe and carbon fiber reinforced wings so the glider can withstand high speed precise flights setting new standards in the 2M wingspan class. The ailerons and flaps are a wide and long feature, making pin-point landings easy while also improving the launch characteristics and giving the pilot a broad performance spectrum for high speed, aerobatics and thermalling.

The planes docile flying characteristics and excellent performance in the air ensure that the GT2000v2 provides maximum flying pleasure, whether you are a weekend pilot or flying in a competition. You will enjoy floating through the air for long periods, as well as lively aerobatics- all with style and precision.

The model comes as a kit version only due to multiple different power system and competition requirements for pilots. Below are some suggestions:

  •  Recommend a motor with reverse shaft and outer diameter of 28mm, such as XM2838 P5B special motor, or higher performance motor
  • ·May use standard size 9g servos for the tail and wing; however due to the thin wing must use smaller wing servos such as KST08, GDW1906, or Blue Arrow D0474HT MG for the aileron and flap. The thickness of the servo should be less than 9mm and the torque greater than 2kg.

Specs:
Wing Span: 2000MM
Length: 1120MM
Wing Area: 30.3dm2
Flight Weight: 670g
Servos: 9g*6
Motor: XM2838 P5B 1800KV
Esc: 40A (as required based on motor)
Propeller: 8x6E (as required based on motor)
Battery: 3S 11.1V 1300mAh (as required based on motor)

CG: about 45mm from the front leading edge of the wing

GT-F3L/F5L-Cygnus

$450.00