Sunbird Glider 63" (1.6M) Wingspan Laser-Cut Wood Model Kit
Sunbird Glider 63" (1.6M) Wingspan Laser-Cut Wood Model Kit Redwing RC is proud to carry another superb Laser Cut Balsa Kit for the traditional R/C hobbyist and builder who enjoys constructing models from kit form. The resulting model is a great little park fly electric glider that performs well and has aileron/elevator/rudder/motor control. The Sunbird is tough enough to handle the odd 'oops!' moment from novice flyers and compact enough to be transported easily. This kit is easy to fly and a little challenging to build, is only electric powered and the PNP kit version comes with everything you need except your battery, and RX/TX. Specification: Wingspan: 1600mm (63") Length: 850mm Flying Weight: ≈480g Radio: more than 4CH Motor: 2212 1100KV ESC: 20A Servo: 9g * 4pcs (See all RedwingRC Servos) Propeller: 7-8 in folded Battery: 3S 800-1500 mAh (Not incl.) (see all RedwingRC batteries/chargers) Battery Charger:(Not incl.) Pulse Balance Charger (PLC100) Kit versions below: F1601=Glider Sunbird KIT only F1601B=Glider Sunbird KIT+ Film (2M Blue, 2M Yellow) F1604=Glider Sunbird KIT+ Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4pcs)+8" folding prop F1604C=Glider Sunbird KIT+ Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4pcs)+ Film+8" folding prop |
NEW
Fourtitude Dual Tank Mounting Trays 12oz
This item is a must have if you are running a smoke system. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes. Mounting dual tanks has always been tough because most aircraft have lightning holes right where you need to place the velcro straps. With this tray you mount it to the aircraft tank floor with wood screws. Then you can easily mount the tanks with just one velcro strap on the back of the tanks. |
FORA1212
$14.99
Spot On Aluminum Round Servo Arm for 25T Futaba & New Hitec
Spot On Aluminum Round Servo Arm for 25T Futaba & New Hitec High Quality 1" Aluminum servo arm from Spot-On RC Spot On Servo Arms are made of high quality 7075-T6 aluminum, one of the highest strength alloys available for this purpose. They feature an ultra secure double lock design, keeping your servo arm secure and eliminating any slop between the main servo gear and the arm. Spot On Servo Arms are also sand blasted and anodized for a beautiful appearance. Spot on offers their servo arms in many sizes, threads and gear output compatibility. Spot On arms are offered in: Available colors are Black or Silver Spot On RC Servo Arms are measured from the center hole of the servo to the outermost hole (for example, a 1” arm is exactly 1” from hole center to hole center). However the larger sizes offer the option of one or two more additional inner holes so you can use them for future projects or fine tune your ratios. Redwing RC only offers the V2, upgraded version, with stronger aluminum and finer design. No matter which Spot On RC Servo Arms you choose you will be sure to experience problem free set up and operation with these high quality servo arms.
|
SPO-TRA-019
$9.99
SCORPION COMMANDER 15V 110A ESC SBEC (V3)
SCORPION COMMANDER 15V 110A ESC SBEC (V3) |
ESC-42-110-SBEC-V3
$119.99