Miracle Brushless Smoke Pump

Miracle Brushless Smoke Pump made by Dualsky

Introducing the new Miracle Brushless Motor Smoke Pump made by Dualsky! These light weight pumps (only 3.1 oz) have a CNC processed 6061 case with a Japanese high speed oil seal. The powerful Outrunner Brushless Motor with carbon composite gear pump supplies 1330PPM @8.0v of flow to provide a great smoke show for any Giant Scale Gasser or Jet! This pump is designed to run off any 2-cell Lipo and can easily be used with programmable and non-programmable radios on any set up with an open channel.  

Radio Set up:

Non programmable Radios

Use a switched channel to switch the Smoke pump on and off. Since there is no trim control on a switched channel, the flow rate is consistent. When the switch is on, flow will be at maximum. You can set the END POINT/ATV of the radio switch channel to control the maximum flow rate to control the smoke density.

Programmable Radios

Plug the smoke signal wire into a spare channel (such as the 8th channel). Set this channel program mixing like the Throttle channel, then set a switch for programming mixing on/off to control smoke pump on/off. Adjust the END POINT/Travel of this channel to control smoke pump flow rate to control the smoke density. For more detailed information please see your radio manual.

Specifications:

• Weight: 3.1 oz (89g)
• Dimension: L70 x W26 x H35mm
• Nominal Voltage: 7.4V, 2S Lipo
• Working Current: 0.9A @ 7.4V
• Motor: XM1806PU, Outrunner Brushless
• Drive Module: Hornet 12A, Brushless Sensorless
• Quatity of Flow(QoF): 1000PPM @ 7.4V, 1330PPM @ 8.0V
• Fully Aluminium Case: YES, CNC-made
• Gear pump: YES, Carbon composites

You will need a smoke tank, and smoke muffler (coming soon).

**Color may vary

**DO NOT dry run pump! This may cause failure and will void warranty.*