APCE 16x10 Prop

Description:
The HS-5645MG is one of the best choices you can make for a 50cc sized plane for the cost. They will also work well in 30cc planes. It is fully programmable using Hi Tec's programmer. The combination of torque, speed, price and extreme holding power make it a favorite among pilots. Special alloy gears called “Alumite” offer tremendous strength yet are lightweight as well.


Specifications:

• Torque:
  • 143 oz/in at 4.8V (10.3 kg/cm)
  • 168 oz/in at 6V (12.1 kg/cm)
     
• Speed:
  • .23 sec at 4.8V
  • .18 sec at 6V
     
• Voltage: 4.8V - 6V
• Weight: 2.11oz (59.82g)
• Size: 40.6 x 19.8 x 37.8mm (1.59 x 0.77 x 1.48in)
   
• Motor Type: 3 Pole Ferrite
• Bearing Type: Dual Ball Bearing
• Gear Type: 3 Metal Gears and 1 Resin Metal Gear
• Connector Wire Length: 11.81" (300mm)
• Control System: +Pulse Width Control 1500usec Neutral
• Required Pulse: 3-5 Volt Peak to Peak Square Wave
• Operating Temperature Range: -20 to +60 Degree C
• Operating Angle: 45 Deg. one side pulse traveling 400usec
• 360 Modifiable: Yes
• Direction: Clockwise/Pulse Traveling 1500 to 1900usec
• Dead Band Width: 8usec
• Potentiometer Drive: Indirect Drive
• Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
• Current Drain (6.0V): 9.1mA/idle and 500mA no load operating

Description:

MPI servo arms are made with heavy duty anodized aluminum offset servo arms designed for Hitec, Futaba, XQ Power, Power HD Servos. These MPI servo arms are drilled and tapped for 4-40 with a starter hole for another hole closer in if necessary. The clamping arm on these MPI arms ensures a safe and secure installation, minimizing any risk of slop or the arms coming loose. 

We recommend the following sizes of MPI arms for the planes below:

30cc planes typically use 1.25" for ailerons and elevators, and 3" for rudder.

50cc planes typically use 1.25-1.5" for ailerons and elevators, and 3.5" - 4" for rudder.

100cc planes typically use 1.5" for ailerons and elevators, and 4" for rudder.

1.25", 1.5", 3", 4" Sizes
Available for HiTEC, XQ Power, PowerHD, Futaba Servos

MPI Arms feature:
Bracing for Extra Strength
Lightweight and Strong
Extra Security Screw to Keep Arms on
Pre Dented to Allow for Optional Holes


Futuba style arms fit: Power HD, XQ-Power, and Futaba
Hitec fit: Hitec


**Now introducing new size! 2-inch lengths for HiTec and Futaba!

MPI Servo Arm Pricing:

• 1.25" arm $8.90
• 1.5" arm $10.25
• 2" arm $11
• 3" rudder arm $15.25
• 4" rudder arm $16.95
  

Sport Cub 500 4Ch Trainer w/ 6-Axis Gyro/ One-key Aerobatic Park flyer RTF