Redwing RC Office Closure May 7-22. Orders can still be accepted during this time and will be processed in order received. Expect shipping to resume 23 May.

Lemon RX DSMP (DSMX/DSM2 Compatible) 6-Channel Receiver /Top-Pin

Ask a question about this product

Printable version

Options

Our Price:

$17.99

Quantity (9)

Details


Availability	9 in stock
Weight	0.25 lbs
SKU	LM-0019S

Lemon RX DSMX/DSM2 Compatible 6-Channel Receiver /Top-Pin

Type:

Lemon Rx DSMP 6-Channel Receiver (Top-Pin, DSMX/DSM2 compatible)

Number of Channel:

Modulation:

DSMP (DSMX/DSM2 compatible)

Band:

2.4 GHz

Dimension:

30(L) x 18(W) x 11(H) mm

Weight:

3.84 grams

Voltage Range:

3.45 - 8.4 V

RCgroups discussion
http://www.rcgroups.com/forums/showthread.php?t=1773138

User Manual re-direct link (Thanks to John [JJ604 RCgroups] in helping us with this user manual.)
http://www.lemon-rx.com/index.php?route=information/information&information_id=4

Ultra low-cost receiver
Base on the Lemon Rx latest DSMP with SDR (software defined radio) technology, this receiver along with extended antenna provides excpetional perofrmance for fomaie to carbon fusleage glider with excpetional performance.

Understanding the receiver (Showing DSMX 6-channel non-diversity receiver)

Binding
1) Plug bind plug to the receiver.
2) Provide power to the unit. LED flashes quickly.
3) Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
4) Remove bind plug.

Failsafe Enable (Video showing 10-Channel receiver)
Video:https://www.youtube.com/watch?v=FyW1v12dv_k
1) Bind the receiver and do not remove bind plug.
2) Upon successful binding, set the transmitter sticks / channels to the desired failsafe position.
3) Press the side pushbutton to save the current position in failsafe mode.
4) Check for green light on. Green light on indicates failsafe is successfully enabled.
5) Remove bind plug and power cycle the receiver.

Failsafe Disable (Video showing 10-Channel receiver)
Video:https://www.youtube.com/watch?v=xpb1tvBvA2E
1) Bind the receiver and do not remove bind plug. If green light is on Failsafe is currently enabled, pressing the side pushbutton will disable Failsafe.
2) Check for green light off indicates Failsafe disabled.
3) Remove bind plug and power cycle the receiver.

Note:
1) This is not a Spektrum DSMX or DSM2 product, nor is it a copy of a Spektrum DSM2 or DSMX product. The Spektrum, DSMX and DSM2 brand is a trademark of Horizon Hobby, Inc.
2) This is not an underground black market fake Spektrum product. Lemon Rx quality is guaranteed.
3) Lemon Rx products are tested to be compatible with Spektrum's DSMX and or DSM2 product (Spketrum, DSMX and DSM2 are the registered trademark of Horizon Hobby, Inc.).

Bob Smith Industries Insta-Set

Untitled Document

Description:

Bob Smith Industries Insta-Set

Insta-Set™

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

Directions:

After joining parts with cyanoacrylate (CA, super glue), spray the seams with Insta-Set™ to cure the CA in 8 seconds. A bead of CA can then be applied to the outside and corners of joints before another application of Insta-Set™ to reinforce their strength. Insta-Set™ can also be applied to one part (with CA on the other) before joining for difficult to bond materials. Insta-Set™ is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.

Works Best On:

Click to Download Safety Data Sheet