RedwingRC Accessories

Lemon RX DSMP (DSMX/DSM2 Compatible) 6-Channel Receiver /End-Pin

Ask a question about this product

Printable version

Options

Our Price:

$17.99

Quantity

OUT OF STOCK

Notify me when back in stock

Details


Availability	No items available
Weight	0.25 lbs
SKU	LM-0021S

Lemon RX DSMP (DSMX/DSM2 Compatible) 6-Channel Receiver /End-Pin

Type:

Lemon Rx DSMP 6-Channel Receiver (End-Pin, DSMX/DSM2 compatible)

Number of Channel:

Modulation:

DSMP (DSMX/DSM2 compatible)

Band:

2.4 GHz

Dimension:

30(L) x 18(W) x 11(H) mm

Weight:

4.43 grams

Voltage Range:

3.45 - 8.4 V

RCgroups discussion
http://www.rcgroups.com/forums/showthread.php?t=1773138

User Manual re-direct link (Thanks to John [JJ604 RCgroups] in helping us with this user manual.)
http://www.lemon-rx.com/index.php?route=information/information&information_id=4

Ultra low-cost receiver
Base on the Lemon Rx latest DSMP with SDR (software defined radio) technology, this receiver along with extended antenna provides excpetional perofrmance for fomaie to carbon fusleage glider with excpetional performance.

Understanding the receiver (Showing DSMX 6-channel non-diversity receiver)

Binding
1) Plug bind plug to the receiver.
2) Provide power to the unit. LED flashes quickly.
3) Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
4) Remove bind plug.

Failsafe Enable (Video showing 10-Channel receiver)
Video:https://www.youtube.com/watch?v=FyW1v12dv_k
1) Bind the receiver and do not remove bind plug.
2) Upon successful binding, set the transmitter sticks / channels to the desired failsafe position.
3) Press the side pushbutton to save the current position in failsafe mode.
4) Check for green light on. Green light on indicates failsafe is successfully enabled.
5) Remove bind plug and power cycle the receiver.

Failsafe Disable (Video showing 10-Channel receiver)
Video:https://www.youtube.com/watch?v=xpb1tvBvA2E
1) Bind the receiver and do not remove bind plug. If green light is on Failsafe is currently enabled, pressing the side pushbutton will disable Failsafe.
2) Check for green light off indicates Failsafe disabled.
3) Remove bind plug and power cycle the receiver.

Note:
1) This is not a Spektrum DSMX or DSM2 product, nor is it a copy of a Spektrum DSM2 or DSMX product. The Spektrum, DSMX and DSM2 brand is a trademark of Horizon Hobby, Inc.
2) This is not an underground black market fake Spektrum product. Lemon Rx quality is guaranteed.
3) Lemon Rx products are tested to be compatible with Spektrum's DSMX and or DSM2 product (Spketrum, DSMX and DSM2 are the registered trademark of Horizon Hobby, Inc.).

Safe 40A Paraboard V3 Parallel Charging Board /XT60 Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

EPB-XT60-40A-safe

$19.95 19.95

R1 Rock Crawler Buggy RTR, 1/10 Scale, w/ a Tube Frame, and 4WD (Scratch and Dent)

R1 Rock Crawler Buggy RTR, 1/10 Scale, w/ a Tube Frame, and 4WD

GMA510111-S&D470

$329.99 329.99

TAFT-HOBBY CESSNA 182 (500 Class) 55IN (1410mm) 4CH (EPO FOAM) PNP

$20 Flat Rate shipping lower 48 USA only. Contact us at [email protected] to calculate international shipping cost.

RedwingRC Plug-and-Play aircraft!

The Dynam T28 Trojan is a great plane for both beginners and experienced pilots! Just getting started in the hobby or just want to try something new, this plane is for you. The Trojan T28 is made with EPOFLEX (EPO) foam- a damage resistant foam. This aircraft is painted with the famous US Air force color scheme. All surfaces are constructed out of the EPO foam so it is not easily damaged and easily repaired. The Trojan is very stable and is a blast to fly! This is a Plug-and-Play aircraft so it will arrive about 80% complete and included cool scale features such as a clear canopy, retractable landing gears and steerable nose landing-gear .

Build time is around 60 min from box to air.

Expect flight time to be from 6-10 minutes per battery.

Key Features:

Powerful BM3715 - 890KV outrunner brushless power system
30A Brushless ESC
Retractable landing gears
Durable and lightweight EPO construction with many surface details
Detailed Body Structure
Suitable for both, beginner thru experienced Pilots
Easy to build
Scale 3 blade prop

Specifications:

Wingspan:	50 inch (1270mm)
Overall Length:	39.37 (1000mm)
Flying Weight:	47.61 (1340g) w/Battery
Motor Size:	BM3715A-KV890 (installed)
Propeller:	3 Blade - 11 x 7 x 3
Radio / Transmitter	5 Channel Required - NOT INCLUDED
Servos:	4 servos installed ( 4 x 9g )
Speed Control :	1 x Dectrum 30A Brushless
Battery:	11.1V 2200 mah LiPo 20C (Not Included)
Charger:	NOT INCLUDED basic 2S - 3SS lipo charger
Flight Times	Average (6-10 mins)
Assembly Time	Approx 60min