Detrum IstoneAcro 6-AXIS Gyro Airplanes Stabilizer

Contact UsCustomer Reviews

Detrum IstoneAcro 6-AXIS Gyro Airplanes Stabilizer

Our Price:

$29.99


Quantity (2)

Availability 2 in stock
Weight 0.10 lbs
SKU DY-DM37890
Manufacturer Dynam

ISTONE-A ACRO is a 6-axis Gyro & Stabilizer for airplane, suitable for normal wing, fly-wing, and V-tail airplanes. It is used to connect with the receiver to control the flight, supports Gyro Off, Normal, and Aerobatic modes, compatible with S.BUS and PWM receivers. You can set the programmable items via the SET button and LEDs.

What is included:

ISTONE-A ACRO Stabilizer, 3-signal wire, anti-shock double sided tape, single-signal wire

Specifications:

  • Main Controller: 32-bit MCU
  • Sensor: 6-axis gyro
  • Gyro Scale Range: -2000dps ~ +2000dps
  • Accelerometer Scale Range: -4g ~ +4g
  • Input Signal: PWM, S.BUS
  • Output Signal: PWM (71.4Hz)
  • Input Voltage: 4.8V ~ 7.4V
  • Operating Temp: -20? ~ 70?
  • Size: 36.5mm*29.4mm*12.4mm
  • Weight: 11g       
: *
: *
: *
 

Detrum Istone-All 6-AXIS Gyro Airplane DSM2/DSMX & S-Bus Stabilizer

Detrum Istone-All 6-AXIS Gyro Airplane DSM&S-bus Stabilizer

DY-DM37913

$37.99

Detrum 3-IN-1 Program Card for ESC, Stabilizer and Battery

 

Detrum 3IN1 Program Card for Stabilizer/ESC/Battery

DY-DM37920

$35.99

SmartDesign V3 "Trouble Free" Tail Wheel Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

This tail wheel assembly is extremely efficient and reliable. With fewer parts, there is less to worry about and the solid construction makes it the go-to choice for pilots at any skill level. The new V2 design incorporates ball bearings for smooth motion, ball-joint to rudder steering connection, wider CF mounting plate, and slightly larger wheels that the v1. "Trouble Free" means just that... no more worrying about screws falling out or loss of control. Make the switch today by installing the SmartDesign Tail Wheel!!!

CNC Aluminum & C.F. Tail Wheel Assembly for 20cc to 220cc

 


 

Features:

 

  • Extremely Reliable
  • Mechanically Efficient Design
  • Simple and Solid Construction
  • Fewer parts needed for install
  • Ball Bearings

 

Pricing

 

  • 20-40cc: $27.00
  • 50-70cc: $34.99
  • 85-120cc: $44.99
  • 150cc-220cc: $54.00

 

 

Weight

 

 

  • 20-40cc: 1.2 oz
  • 50-70cc: 1.6 oz
  • 85-120cc: 2.2 oz
  • 150cc-220cc: 2.6 oz

Don't forget to check out our Aluminum Hub Wheels! They are excellent replacements for landing gears and tail wheels. Please see sizing chart below.

Tail Wheel Chart

GW-KAGC-112

$54.99

Power HD RX30 "Glitch Buster" Receiver Voltage Stabilizer

Power HD RX30 Receiver Voltage Stabilizer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Thought our other servos were great? Well of course they are! But wait until you check out these new Power HD servos - they will rock your wheel pants off* (no wheel pants will be harmed by using this product - but you get the idea).

There's a storm brewing in Redwing RC! These new HD Storms can handle anything thrown at them. Now, we can't imagine your servos heading into battle facing a hurricane or tornado - but they sure behave as if they have fought and conquered the fiercest of storms - taking all of that power and knowledge with them when they are installed into your bird. Rain or shine, these servos are ready for anything!

The HD Storm 3s are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

New and Improved Technology!

The Power HD Storm 3 high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD Storm 3 high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

So now the only question is - why are you still reading this? Go buy your Power HD Storm 3 servos before they're gone!

 

Specs:

  • Torque:
    • 374.9 oz/in at 6V (27.0 kg/cm)
    • 444.4 oz/in at 7.4V (32.0 kg/cm)
       
  • Speed:
    • .14 sec at 6VV
    • .11 sec at 7.4V
       
  • Voltage: 6.0 ~ 8.4 V
  • Weight: 2.82 oz (80g)
  • Size: 1.57 x 0.79 x 1.53 in (40.0 x 20.0 x 38.0mm)
     
  • Operating Temp- -20~60centigrade
  • Working Frequency - 1520μs / 333hz
  • BRUSHLESS Motor
  • Double Ball Bearings
  • Titanium and Steel gears
  • Water resistant O-Rings

 

HD-RX30

$4.99

GT Power JST XH Balance Board for LiPo Battery Chargers

GT Power JST XH Balance Board for LiPo Battery Chargers

Description:

GT Power Servo Consistency Master.

With this cool device you can test up to 3 servos at a time for consistency and precision. With the GT Power servo tester you can see how servos react in three different testing modes. Manual, Neutral, and Automatic.

---

Manual Mode:: Turn the knob at different speeds however you want to check reaction time.

Neutral Mode:: Make the servo go back to the neutral position.

Automatic Mode:: "window wiper mode"- make the servo swing back and fourth at max angle.

---

Specs:

  • Connect 1-3 servos simultaneously
  • Test in 3 different modes
  • Easy to read labels
  • LED lights

GT-JST-XH-BB

$5.99