Ford F450 KG1 Edition 1/10 4WD RTR, Blue Galaxy

Contact UsCustomer Reviews

Ford F450 KG1 Edition 1/10 4WD RTR, Blue Galaxy

Our Price:

$399.99

Quantity (2)

Availability 2 in stock
Weight 7.50 lbs
SKU CEG8986

Ford F450 KG1 Edition 1/10 4WD RTR, Blue Galaxy

CEN Racing official Licensed FORD F450 SD KG1 Wheel Edition 1/10 4WD RTR (Blue Galaxy) Custom Truck DL-Series.

True 1/10 scale RTR. Body length 26.7 inch (678.18mm) true body scale truck.

Features:

  • KG1 FORGED Trident-D wheels. Front 35mm, Rear 31mm per wheel
  • REALISTIC textured bed linear coating
  • 90mm Aluminum pewter anodized shock housing
  • Black Anodized lower and upper links
  • RED anodized shock springs
  • ESC-40A WP-1040-Brushed (Powered by HobbyWing): Water-proof and dust-proof for all weather; Built-In Capacitor Module; Automatic throttle range calibration; Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery; Over-Heat protection and throttle signal loss protection; Easily programmed with jumpers
  • Motor-RS-550 high Torque Motor - Power by Mabuchi Motor
  • Servo -12Kg Servo O.E.M. by Savox: 4.8V 0.26 sec/60deg 10.0 kg-cm; 6.0V 0.23 sec/60deg 12.0 kg-cm; 25T Horn Gear Spline
  • Radio System: Pistol-Grip AMP 30 3 Channel Transmitter; Digital Trimming; Steering Dual-Rate (ST D/R) Adjustment; End Point Adjustment (EPA); Built in Failsafe
  • Chassis: Steel Frame Rails; CMS (Chassis Mounted Servo) Chassis Design; Stamped Steel Shock Hoops; Steel Skid Plate; Full Precision Ball Bearing Support; Adjustable Turnbuckles; High Torque Servo Horn Safer
  • Suspension: 3 Links Suspension with Panhard Bar Design; Aluminum shock housing; Big Bore Oil Filled Adjustable Coil Over Shocks; Harden Steel Steering Drag Link; 6mm Aluminum Linkage; 90mm shock housing
  • Drivetrain: Sway bar included; 4 Wheel Drive; Center Shaft Drive Train for more power transferred to the wheels; Highly Efficient Transmission System; Wide Range Easy Changeable Gear Box Design; Sealed transmission eliminates dirt and dust; Sealed Axle housing; 5mm Hardened Steel Axle shaft; Differential Center Locker Front/Rear Planetary Gear Type; Metal Transmission Gears; Planetary Gear type Differential

Specifications:

  • Length: 26.70inch (678.18mm)
  • Width: 11.41inch (290mm)
  • Wheelbase: 17.60inch (447mm)
  • Ground Clearance: 2.52inch (64mm)
  • Weight: 5.51 lb. 2.5kg

Add the KAOS Aluminum Tow Hitch w/ 5.8mm Pivot Ball Bolt, Ford F450 SD for $29.99.

There are numerous parts that we can get for the F450. Send us an email at [email protected] for your request.


: *
: *
: *
 

Quick Connect Ball Joint

Quick connect ball joint for the throttle. Easy to connect throttle links!

Comes in Pairs!, smaller than our standard ball joints.

SD-519B50

$10.00

Savox SB2292SG - Monster Performance Brushless Servo, Black Edition

Savox SB2292SG, Monster Performance, Brushless Servo Black Edition 0.055sec / 624.9oz @ 8.4v

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Ever go to a restaurant and look at the menu and think to yourself - "there's so many options that all just look so good!" - and have trouble deciding? Well here at Redwing RC our awesome servo collection is very similar! We have a great variety of spectacular servos to choose from so there is something for everyone! But let's introduce yet another great option to consider - the Savox SA-1230.

The Savox SA-1230 servos are a more powerful, MONSTER torque, coreless digital servo that can fit every control surface for giant scale aircrafts - while still being super lightweight, 20% lighter than its kind! Sounds great - right?! These servos combine leading edge technology with super high 12 bit resolution and super strong unique steel gears.

The coreless motor ensures high speed, incredible efficiency and LOW POWER CONSUPTION - so no "hungry hungry servo" sucking away your battery life - also allowing cooler and smoother operating temperatures. So chill out!

You can trust that these SA-1230 servos are a perfect match for your large scale model because they are especially designed to handle the stresses of large scale flying. Whether is be jet, 3D or scale - these servos take on the stress so you don't have to!

All in all - these servos are a great choice for your RC plane. Order yours now!

 

Specifications:

  • Torque:
    • 416.6 oz/in at 4.8V
    • 500 oz/in at 6V
       
  • Speed:
    • .20 sec at 4.8V
    • .16 sec at 6V
       
  • Voltage: 4.8V to6V
  • Weight: 2.78 oz (79 g)
  • Size: 1.6 x .79 x 1.77 in (40.3 x 20.2 x 45.0 mm)
     
  • Gear Type - Unique Steel
  • Case - Full Aluminum
  • Bearing - dual ball bearings
  • Frequency - 250-333hz
  • Output Shaft - 25 Tooth Spline

 

 

 

GET YOURS TODAY!

 

 

 

SAVSB2292SG

$145.99

Savox SW-1210SG Waterproof, HV, Brushless, Digital Servo 0.13 sec / 444.4oz @ 7.4V

Savox SW-1210SG Waterproof, HV, Brushless, Digital Servo 0.13 sec / 444.4oz @ 7.4V  

 

 

 

 

 

 

 

Savox SW-2210SG Waterproof, HV, Brushless, Digital Servo 0.11 sec / 500oz @ 7.4V 

Ever go to a restaurant and look at the menu and think to yourself - "there's so many options that all just look so good!" - and have trouble deciding? Well here at Redwing RC our awesome servo collection is very similar! We have a great variety of spectacular servos to choose from so there is something for everyone! But let's introduce yet another great option to consider - the Savox SA-1231.

The Savox SA-1231 servos are a more powerful, high torque, coreless digital servo that can fit every control surface for giant scale aircrafts - while still being super lightweight, 20% lighter than its kind! Sounds great - right?! These servos combine leading edge technology with super high 12 bit resolution and super strong unique steel gears.

The coreless motor ensures high speed, incredible efficiency and LOW POWER CONSUPTION - so no "hungry hungry servo" sucking away your battery life - also allowing cooler and smoother operating temperatures. So chill out!

You can trust that these SA-1231 servos are a perfect match for your large scale model because they are especially designed to handle the stresses of large scale flying. Whether is be jet, 3D or scale - these servos take on the stress so you don't have to!

All in all - these servos are a great choice for your RC plane. Order yours now!

 

Specifications:

  • Torque:
    • 389 oz/in at 4.8V
    • 444.4 oz/in at 6V
       
  • Speed:
    • .18 sec at 4.8V
    • .14 sec at 6V
       
  • Voltage: 4.8V to 6V
  • Weight: 2.78 oz (79g)
  • Size: 1.58 x .79 x 1.77 in (40.3 x 20.2 x 45 mm)
     
  • Gear Type - Unique Steel
  • Case - Full Aluminum
  • Bearing - dual ball bearings
  • Frequency - 250-333hz
  • Output Shaft - 25 Tooth Spline

 

 

 

GET YOURS TODAY!

 

 

 

SAV-SW1210SG

$99.99