Paraboard Parallel Charging Board /XT60 Connector

Safe Micro Paraboard (Pico/MCPX)

Safe Parallel Charge Board for 2S JST-PH

Paraboard Parallel Charging Board for Lipo /Traxxas Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

Paraboard Parallel Charging Board for Lipo /Deans (T-Plug) Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

Paraboard Parallel Charging Board for Lipo /EC3 Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

Carbon Fiber Landing Gears for EPP Planes

Available in two styles to fit the Future Model MX2, Yak55, Sbach, and Katana

Dimensions (match the below information to the inset photo)

• MX2 Style
• A=85mm
• B=135mm
• C=20mm taper to 10mm
• D=20mm
• E=250mm

• Yak Style
• A=65mm
• B=140mm
• C=20mm taper to 10mm
• D=20mm
• E=255mm

The Yak style gear will work for the Future Model Sbach and the MX2 style gear will work for the Katana.

BAT-SAFE XL Lithium Battery Charging/Storage Safe Box  (Silver)

Description:

This flame retardant bag is a convenient way of safeguarding your LiPo batteries during charging, transit, and storage.

Just place your battery or batteries in the bag, route the charge wires through the vents at either side of the top flap, and close the flap. ***Please Note: The use of a LiPo Guard is intended to reduce damages in an accident and will not necessarily prevent damage to surrounding objects. Never charge batteries unattended and please follow all safe charging and storage practices.***

Dimensions:

• Small: 7.25"x 8.75"
• Large: 9"x11.5"

High Quality Electric Folding Props/Propeller (7-11" folding)
Dynam High Quality Carbon Fiber Electric Props. These props are durable and light, making them the ideal choice for your electric plane.

Available Sizes:

• 9x6
• 14x7
• 15x6
• 16x12
• 17x12
  
  
  Features:

   

  • High Quality Carbon Fiber Weave
  • These carbon fiber propellers have been manufactured with very high standards.
  • Extremely light and strong with ultra thin and stiff carbon construction.
  • The center hole is 9mm and comes with a series of adapters to convert this all the way down to 3mm in 1mm increments.
  • The hub can also be reamed out safely to around 14mm.