JST-XH and ThunderPower (TP) 2-6S Balance Board

Safe Micro Paraboard (Pico/MCPX)

Safe Parallel Charge Board for 2S JST-PH

Paraboard Parallel Charging Board for Lipo /Traxxas Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

Paraboard Parallel Charging Board for Lipo /Deans (T-Plug) Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

Paraboard Parallel Charging Board for Lipo /XT60 Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

Paraboard Parallel Charging Board for Lipo /EC3 Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

Paraboard Parallel Charging Board for Lipo /EC5 Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

Paraboard Parallel Charging Board for Lipo /EC5+EC3 Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

Paraboard Parallel Charging Board for Lipo /EC5+Deans Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

JST-XH 2-6S Lipo Battery Charger Balance Board

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

Multi-Adapter All-in-One Balance Board (Thunder Power / Hyperion / JST-XH / EH)

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

This item is a must have if you are running a smoke system. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes. Mounting dual tanks has always been tough because most aircraft have lightning holes right where you need to place the velcro straps. With this tray you mount it to the aircraft tank floor with wood screws. Then you can easily mount the tanks with just one velcro strap on the back of the tanks.

RCGF 15CC SE Stinger Gas Engine 

Glow size：economy and powerful

New Series Engines with all new design --  Stinger Engines 
More powerful , Stronger material , More precision , More shining 

Engine SIZE:

 RCGF 15cc (SE)

1. Parameter
2. Type : 2 cycle piston valve type gasoline engine for airplane 
3. Displacement (cc) : 15cc (.91 cu in)
4. Bore x Stroke (mm): 1.3 in (32mm)*0.8 in (19.6mm)
5. Carburetor : Walbro
6. Ignition : DC-CDI (Computer Controlled auto advance, electronic ignition system)
7. Power supply: 6-8.4V
8. Maximum Output : 2.4 hp/1.76KW
9. Requires: Gasoline, 2-cycle oil, ignition battery & propeller
10. speed rang : 1500-15000rpm
11. Gasoline-Version : Pre-mixed Fuel, 25-40 (Gasoline):1 (recommended : 30:1) (90% high otcane unleaded gasoline, Import gas into carbon fiber installations valves)
12. Lubrication Oil : 2 cycle engine oil 
13. Propeller : 15*6 9000 rpm; 13*6 11000rpm (Standard Two leafs prop)
14. recommended props :13 x 6, 14 x6,13X8,15X8,15X6
15. recommended Airplane: 60 size plane,50 size plane,40 size plane
16. Cooling System : Air Cooled
17. RCGF engine package Includes: electronic CDI ignition, muffler, spark plug, gaskets, bolts, throttle arm extension & manual.

Weight

1. Engine: 1.31 lb (594 g)
   Muffler: 1.8 oz (51 g)
   Ignition Module: 4.4 oz (125 g)
   Total: Weight: 1.69 lb (770 g)

Technical Data

1. Technical Data:
2. Ignition Battery: 6-8.4 NiCd or NiMH, 6.6V LiFe or 2S LiPo pack
3. Gasoline/Oil Mix: 30:1
4. Replacement Spark Plug: M8 1/4-32 or equivalent
5. Idle Speed: 1800 rpm/min
6. Static Thrust:
7. 10.2 lb (4.6 kg) @ 328 ft (100 m) altitude
8. 9.1 lb (4.1 kg) @ 5,900 ft (1800 m) altitude 

Flight Model 91" VOTEC 322 60-80cc ARF

The J3 92" Piper Cub is an amazing aircraft for smooth flights and a very scale appearance. The 30cc Piper Cub form RedwingRC has a beautiful color scheme that helps with orientation and leaves you plenty of room for custom graphics. The 30cc Piper Cub is built with high quality balsawood and provides a lightweight airframe that is ridged and strong in all the right places.

The 30cc Piper Cub was made to be an outstanding aircraft. The large rudder, large control surfaces, and aerodynamic nose makes this a very responsive plane in the air.

As with all RedwingRC planes, the 30cc Piper Cub has quality hardware and is a fun build.

Enjoy the sky with the 30cc J3 Piper Cub available at RedwingRC!!!


Flight Video


 

Specifications:

• Wing span: 92" / 2337
• Wing area: 78.58sq.dm
• All up flying weight:
• Length: 57.6" / 1462mm
• Cowl:
  • Inside Width:
  • Inside Height:
• Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
• Recommended Spinner Size: 3"
• Recommended CG:
• Recommended Prop Size:
  •  
• Recommended Throws: adjust to liking as you fly
  • Low Rates Settings | High Rate Settings
  • Rudder:|
  • Ailerons: |
  • Elevator: |

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Canister ready
• Fiberglass stab mounts
• Painted matching spinner (optional)
• Fast fly and easy build features, such as : pre-drilled hinges, pre-plumbed fuel tank, pre-installed rudder cable,

We DO ship our planes internationally!

Please contact us with your location for more specific cost.