AR T-Switch (Telemetry Switch, Dual Battery backer redundancy with Fail-safe technology and downlink telemetry)

Contact UsCustomer Reviews

AR T-Switch (Telemetry Switch, Dual Battery backer redundancy with Fail-safe technology and downlink telemetry)

Our Price:


Switch Configuration
Input Connectors
Output Connectors
Quantity (5)

Availability 5 in stock
Weight 1.00 lbs
SKU BRC-887-TSwitch
Manufacturer Booma RC

AR T-Switch (Telemetry Switch)-- Dual Battery backer redundancy switch with Fail-safe technology and downlink telemetry--IN Stock now...get one before they are gone, they will go fast!

Welcome the AR T-Switch. A power switching system using the tech from the premier AR Smooth Flite and ARXL systems, combined with the auto protocol sense technology, encased in a small stylish light-weight aluminium case to provide a complete modular design featuring multiple switching and input/output options. The new T-Switch comes standard with dual 30amp rated original AMASS miniature XT30 connectors and can be configured to any input and output combination without the need to solder. 

The T-switch sports the latest plug and play feature, Auto Protocol sense technology so no bind plugs or programming required. Simply power the unit, plug your receiver into the Telemetry port and the Switch will auto sense the correct protocol giving you seamless battery down link telemetry to your radio. The AR T-Switch will output dual battery telemetry including Voltage, Current and battery consumption. Replace your current clunky Telemetry devices and replace them with a compact and light weight T switch! See the videos below.

T-Switch is a follow on from the multi-switch predecessor and incorporates the modular design with multiple Switching options: Remote Switch, Pin Flag Switch or Magnetic Switch providing a switch for any install allowing pilots the ability to create a design that works to their exact requirements and is easily reconfigurable to allow using in all your models.

All this in a stylish compact light weight full aluminium case for even more power handling.

Built with proven dual battery redundancy technology the AR T-Switch can be used with either a single or dual battery setup and is designed to power any receiver or power distribution system on the market.

 With its built in failsafe technology you can have peace of mind knowing that the AR T-Switch has you covered.

 Its slim and lightweight case the AR T-Switch can be mounted inside your model, creating a sleek looking finish for all models.

Each T switch can be upgraded to a Smart Switch with the addition of a Smart Screen display and comes standard with all cables required for installation. This includes the necessary telemetry cables as well as the AR scale pin flag switch design. AR T-Switch is also compatible with both Remote switch and Mag switch style actuators.

  • Works with all major Radio brands including Futaba, JR, Jeti, Graupner Fr-Sky and Spektrum
  • Works with all battery chemistries, NiCD, Nimh, Lion, LiFe, LiPo or PB.
  • 2S, 3S and even 4S capable.
  • Dual Battery Backer.
  • Fail safe switching.
  • Supplied with our universal Switch connector for multiple Switching Options.
  • Multiple Switching Options; PinFlag, Magnetic or Remote switching.
  • Single or Dual Battery input Ready.
  • XT30 connectors for multiple easy-to-change Input options; JR, Ultra, XT60 EC3 Etc.
  • Single or Dual Battery input Ready.
  • Multiple easy-to-change output options; JR, Ultra, XT60 EC3 Etc.
  • Supplied with a bright blue remote LED for mounting anywhere in the model.
  • 4 volt to 12 volt capable for those new 12 volt servos.
  • 30A (30 Seconds) inputs and outputs. 
Check out this quick video where Brendan goes through the features of the AR T-Switch
Check out how easy the AR T-Switch modular design makes installation in your next model.
: *
: *
: *



Booma RC

Booma RC pin flag switch for IntelliReg, Smart-Fly or Gryphon regulator. This pin flag switch Booma RC is an ultra high quality fail safe switch designed as a replacement switch for Smart-Fly systems, Power System, Power Expander, Regulators as well as Gryphon Heli regulators.

Supplied with 1 x switch actuator and 1 x pin flags.



LiFe Batteries 2S

Our LiFe Batteries (also known as A123 Batteries) have huge advantages over most other options.

1) LiFe Batteries are lightweight - as light as Lipos
2) LiFes are safer than Lipos (do not combust easily like lipos)
3) LiFe Batteries supply a constant voltage (They stay right near 6volts from start to finish ensuring consistent flights)
4) Run Life batteries to your servos and ignition without regulators (For extra caution some people run a regulator to their ignition still)
5)Life's have a high Charging Capacity. Charge up to 5amps, allowing you to charge them up in MINUTES!

The 2100 or 3000 Mah can be used as a SINGLE battery system for 30cc planes. (we recommend spliting the lead and put 2 JR leads on, to run to the receiver and the other to ignition). You can also run a single 3000 Life Battery on a 50cc Plane.

The 1450mah LiFE Battery is a great option for those that want a separate battery for ignition and receiver (if you are running FM or hesitant to use a single battery system). The 1450mah Life is a great battery for the ignition for either a 30cc or 50cc sized plane

We recommend the following:
On the MXSR (2) 2100mah, or 1 3000mah placed on the mount box or front of the plane. It is a bigger plane and will do well with the extra voltage and weight.
Other 30cc planes - (1) 1450mah for ignition, (1) 2100mah for receiver or for a lighter set up
(1) 2100mah for both (split the wire to 2 leads) OR (2) 1450mah (one for ignition one for receiver).

50cc sized planes (1) 1450mah LiFe battery for ignition and (1) 3000mah LiFe battery for receiver or, for a lighter set up
(1) 1450mah for ignition, and (1) 2100 for receiver OR (1) 3000mah LiFe for both receiver and ignition

WATCH THIS VIDEO: Explains whether to use a regulator or not, 2 batteries or 1 for your plane, Redundancy and more.


  • Type: LiFe Battery (same technology as A123)
  • Weight:
    • 1450mah - 2.8oz,
    • 2100mah - 4oz,
    • 3100mah Life - 5.5oz
  • Size:
    • 1450mah- 15mm x 34mm x 87mm,
    • 2100mah- 12mm x 50mm x 106mm,
    • 3000mah- 130mm x 45mm x 15m
  • Voltage: 6.6Volts
  • Discharge rate:
    • 20c maximum continuous
    • 40c maximum burst
  • 2 cells (2s)
  • 14gauge Wire
  • Connectors: Two Options!
    • T Connector (T connector that fit a standard Dean)
    • XT-60 Connector. Choose Below
  • Also a balancing lead

Be sure to select the XT connector if purchasing for use with our Power Box PRO's. Please select connector type: Deans or XT.



  • 1450mah - $15.99
  • 2100mah - $25.99
  • 3000mah - $39.99



Fourtitude V2 Gas Tank- 20oz


The NEW Fortitude V2 gas tanks are here!!!



Make sure to upgrade asap as this new and improved design is the cutting edge of next generation RC gas tanks. You are probably familiar with the old design- with the the line-in and the vent nozzle on the top of the tank and the line running to the engine on the cap. Because there are so many different fitting and sealants, there are alot of places where something can go wrong or start leaking.

The V2 design eliminates ALL of these problems with ONE SIMPLE DESIGN..... ALL nozzles are in the removable cap which has TWO rubber gaskets and is ONE SOLID PIECE, which includes the vent tube and filling tube. Fewer parts = Fewer problems.

Fortitude has hit the target with the V2 Tank and as always, is the best quality you can get!

Fortitude (or 4titude) gas tanks are high quality, crystal clear plastic tanks, that take the guesswork and worry out of your tanks. You can clearly see into the 4titude tank to know if your line is still flexible and your clunk is in place! Fortitude tanks include the foam, the Velcro and the tubing to hook to your engine!

4titude tanks are SUPER light, in fact, the lightest commercially available tanks on the market. They use aerospace grade adhesives to ensure long life. 4titude tanks are also made of seamless plastic, making them fully resistant to splitting!

The included clunk is filtered as well.




V2 Features:

  • Injection Molded Single piece glass filled nylon fitting manifold. Light weight extremely strong material that creates a very easy to plumb and compact fuel tank.

  • Dual static O-ring seals, designed utilizing the latest aerospace engineering technology, to seal fluid even under high pressure.  V2 has one potential leak point and with the redundant static seals we have double assurance it will never leak.

  • Plumbed with a filtered clunk and an extended fill/ drain tube to make it easy to drain the tank completely.

  • Zero protrusions/ fittings on the outside of the tank to interfere with tight airframe installations.

  • We took care of making sure there is zero guess work involving installation. 3D diagram included with each tank showing how to properly plumb your fuel system for the best results.



Note the length dimension is from the back of the tank to the front of the fitting/tubing barbs.


  • Size: 20 ounce (591 ML) - Length 7 5/8” x Width 2 5/8" x Height 2 5/8” (193.5 x 66.5 x 66.5 mm)
  • Weight: 1.75 ounces
  • Fittings are part of the cap/ internal tubing
  • Filtered clunk
  • Super light!
  • Crystal clear
  • Seamless
  • Includes: Tank/foam/velcro
  • Fourtitude Tanks are compatible with gas engines only. (Not compatible with Glow fuel)




Fortitude tanks are compatible with ALL oils, synthetic and non-synthetic. Fortitude uses PPG Class B sealant. The expert below explains how high tech and quality of a sealant it is:

“PPG Class B is an aircraft integral fuel tank sealant. It has a service temperature range from - 65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material is designed for fillet sealing of fuel tanks and other air- craft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after pro- longed exposure to both jet fuel and aviation gas. "






Tech Aero HV Ultra IBEC (5.9V, 6.3V, 7.3V, and 8.0V)

Tech Aero BEC HV